SENSITRON SEMICONDUCTOR SHD852002 TECHNICAL DATA DATA SHEET 273, REV. B 12A-Peak Low Side Dual MOSFET Driver Bipolar/CMOS/DMOS Process FEATURES: • High Peak Output Current - 12A • Wide Operating Range - 4.5V to 18V • Low Supply Current - 450µA w/Logic 1 Input • Low Output Impedance - 1.0Ω, Typical MAXIMUM RATINGS (per driver) RATING Power Dissipation 25°C) Derating Factors Storage Temperature Lead Temperature (10sec) Supply Voltage Input Voltage, (to Ground) (TA ≤ (To Ambient) Input Current (VIN >VS) SYMBOL - MIN. - TYP. - MAX. 1,250 UNITS mW - -65 -5.0V Gnd. - 10 +150 300 20 VS+0.3V Gnd. 50 mW/°C °C °C Volts Volts - T = 25°C with 4.5V ≤ VS ≤ 18V otherwise specified. ELECTRICAL CHARACTERISTICS (per driver) A Logic 1 Input Voltage Logic 0 Input Voltage Input Voltage Range Input Current, (0V ≤ VIN ≤ VS) High Output Voltage VIH VIL VIN IIN VOH Low Output Voltage Output Resistance, Output Low, (IOUT = 10mA, Vs = 18V Output Resistance, Output High, (IOUT = 10mA, Vs = 18V Peak Output Current (VS = 18V) Latch-Up Protection (Duty Cycle ≤ 2% t ≤ 300µs) Rise Time, (CL = 15,000 pF) Fall Time, (CL = 15,000 pF) Delay Time Delay Time Power Supply Current, (VIN = 3.0V) (VIN = 0V) Operating Input Voltage VOL RO RO IPK IR tR tF td1 td2 IS ELECTRICAL CHARACTERISTICS mA VS 2.4 -5.0 -10 VS -0.025 >1500 4.5 1.3 1.1 - 0.8 VS +0.3 10 - Volts Volts Volts µA Volts 0.6 0.8 12 20 24 15 35 0.4 80 - 0.025 1.5 1.5 40 50 30 60 1.5 150 18 Volts Ohms Ohms Amps mA ns ns ns ns mA µA Volts T = -55°C to +125°C with 4.5V ≤ VS ≤ 18V otherwise specified. A Logic 1 Input Voltage Logic 0 Input Voltage Input Voltage Range Input Current, (0V ≤ VIN ≤ VS) High Output Voltage VIH VIL VIN IIN VOH Low Output Voltage VOL 2.4 -5.0 -10 VS -0.025 - 1.4 1.0 - 0.8 VS +0.3 10 - Volts Volts Volts µA Volts - 0.025 Volts •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SHD852002 TECHNICAL DATA DATA SHEET 273, REV. B ELECTRICAL CHARACTERISTICS (Continued) T = -55°C to +125°C with 4.5V ≤ VS ≤ 18V otherwise specified. A RATING Output Resistance, Output Low, (IOUT = 10mA, Vs = 18V) Output Resistance, Output High, (IOUT = 10mA, Vs = 18V) Rise Time, (CL = 15,00 pF) Fall Time, (CL = 15,000 pF) Delay Time Delay Time Power Supply Current, (VIN = 3.0V) (VIN = 0V) Operating Input Voltage SYMBOL RO RO tR tF td1 td2 IS VS MIN. 4.5 TYP. 0.8 1.3 23 30 20 40 0.6 0.1 - MAX. 2.2 2.2 50 60 40 80 3.0 0.4 18 UNITS Ohms Ohms ns ns ns ns mA mA Volts MECHANICAL DIMENSIONS: in Inches Tolerance +/- .010 except where noted PINOUT TABLE DEVICE TYPE MOSFET CERPACK-16 Pin- 1 Pin-2 Pin-3 Pin-4 Pin-5 Pin-6 VS1 PIN-11 N/C Input 1 PIN-12 Gnd 2 N/C PIN-13 Gnd 1 Gnd 1 PIN-14 Output 1 Gnd 2 PIN-15 Output 1 Output 2 PIN-16 VS1 Pin-7 Pin-8 Pin-9 Pin-10 Output 2 VS2 VS2 Input 2 - - - - •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] • SENSITRON SEMICONDUCTOR SHD852002 TECHNICAL DATA DATA SHEET 273, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •