TDK MLG0603S0N5BT

(1/4)
SMD Inductors(Coils)
For High Frequency(Multilayer)
Conformity to RoHS Directive
MLG Series MLG0603S
FEATURES
• Nominal inductance values are supported from 0.3 to 100nH.
• Provides high Q characteristics.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
PRODUCT IDENTIFICATION
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
(4) Inductance value
SHAPES AND DIMENSIONS
(5) Inductance tolerance
MLG 0603 S 2N2 S T
(1)
(2) (3) (4) (5) (6)
(1) Series name
(2) Dimensions
0603
(3) Material code
2N2
12N
R10
B
C
S
H
J
0.3±0.03
0.6±0.03
0.6× 0.3mm (L× W)
2.2nH
12nH
100nH
±0.1nH
±0.2nH
±0.3nH
±3%
±5%
(6) Packaging style
T
0.15±0.05
Taping (reel)
0.3±0.03
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C [Unit of products]
Weight: 0.2mg
0.25 to 0.35
RECOMMENDED PC BOARD PATTERN
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
10s max.
250 to 260˚C
Natural
cooling
230˚C
PACKAGING STYLE AND QUANTITIES
Packaging style
Taping
Quantity
15000 pieces/reel
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
006-01 / 20070702 / e521_mlg0603.fm
(2/4)
ELECTRICAL CHARACTERISTICS
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
12
15
18
22
27
33
39
47
56
68
82
100
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±0.1, ±0.2, 0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3%, ±0.3nH
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
±3, ±5%
—
—
—
—
—
—
—
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
5
5
5
5
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Self-resonant
frequency
(GHz)
min.
typ.
10.0
20up
10.0
20up
10.0
20up
10.0
20up
10.0
16.3
10.0
16.1
10.0
13.8
10.0
14.4
10.0
13.6
10.0
12.3
9.0
11.4
9.0
10.4
9.0
11.5
8.5
10.0
8.2
9.8
8.0
8.9
8.0
9.2
6.5
8.1
6.2
7.8
5.8
7.0
5.5
6.9
5.0
6.6
5.0
6.4
4.5
5.4
4.5
5.5
4.2
5.3
4.2
5.1
3.6
4.4
4.2
5.3
3.8
4.5
3.4
4.9
3.2
4.1
2.8
3.6
2.5
3.3
2.2
2.8
2.0
2.5
1.8
2.2
1.6
2.0
1.4
1.6
1.3
1.5
1.2
1.4
1.05
1.2
0.90
1.1
0.77
0.9
DC resistance
(Ω)
max.
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.15
0.15
0.15
0.15
0.2
0.2
0.25
0.25
0.25
0.25
0.3
0.35
0.35
0.4
0.4
0.45
0.45
0.5
0.55
0.6
0.7
0.7
0.8
0.8
0.9
1.1
1.2
1.2
1.5
1.8
2.0
2.2
3.2
3.5
4.0
4.5
typ.
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.06
0.07
0.07
0.09
0.12
0.14
0.14
0.15
0.17
0.20
0.23
0.22
0.27
0.27
0.28
0.23
0.31
0.32
0.32
0.43
0.45
0.51
0.53
0.63
0.69
0.78
0.88
1.00
1.20
1.40
1.48
2.11
2.40
2.80
3.13
Rated current
(mA)max.
Part No.
600
600
600
600
600
600
600
600
550
550
550
550
500
500
400
400
300
300
300
300
300
300
300
300
250
250
250
250
200
200
200
200
180
180
150
150
100
100
50
50
50
50
50
50
MLG0603S0N3†∗ T
MLG0603S0N4†T
MLG0603S0N5†T
MLG0603S0N6†T
MLG0603S0N7†T
MLG0603S0N8†T
MLG0603S0N9†T
MLG0603S1N0†T
MLG0603S1N1†T
MLG0603S1N2†T
MLG0603S1N3†T
MLG0603S1N5†T
MLG0603S1N6†T
MLG0603S1N8†T
MLG0603S2N0†T
MLG0603S2N2†T
MLG0603S2N4†T
MLG0603S2N7†T
MLG0603S3N0†T
MLG0603S3N3†T
MLG0603S3N6†T
MLG0603S3N9†T
MLG0603S4N3†T
MLG0603S4N7†T
MLG0603S5N1†T
MLG0603S5N6†T
MLG0603S6N2†T
MLG0603S6N8†T
MLG0603S7N5†T
MLG0603S8N2†T
MLG0603S9N1†T
MLG0603S10N†T
MLG0603S12N†T
MLG0603S15N†T
MLG0603S18N†T
MLG0603S22N†T
MLG0603S27N†T
MLG0603S33N†T
MLG0603S39N†T
MLG0603S47N†T
MLG0603S56N†T
MLG0603S68N†T
MLG0603S82N†T
MLG0603SR10†T
†: Please specify inductance tolerance, B (±0.1nH), C (±0.2nH), S (±0.3nH), H (±3%) or J (±5%).
• Test equipment
Inductance Q : HP4291A+16197A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
• Rated current : Value obtained when current flows and temperature has risen to under 20°C.
∗
• All specifications are subject to change without notice.
006-01 / 20070702 / e521_mlg0603.fm
(3/4)
L, Q vs. FREQUENCY CHARACTERISTICS
Q typ.
1.8GHz
2.0GHz
2.4GHz
500MHz
0.3
0.3
0.3
14.5
MLG0603S0N3†∗ T
MLG0603S0N4†T
0.4
0.4
0.4
14.0
MLG0603S0N5†T
0.45
0.45
0.45
14.1
0.5
0.5
0.5
15.6
MLG0603S0N6†T
MLG0603S0N7†T
0.6
0.6
0.6
16.3
0.7
0.7
0.7
15.4
MLG0603S0N8†T
MLG0603S0N9†T
0.8
0.8
0.8
15.1
MLG0603S1N0†T
0.9
0.9
0.9
14.3
1.0
1.0
1.0
14.4
MLG0603S1N1†T
MLG0603S1N2†T
1.1
1.1
1.1
14.2
1.2
1.2
1.2
14.3
MLG0603S1N3†T
MLG0603S1N5†T
1.4
1.4
1.4
14.8
MLG0603S1N6†T
1.5
1.5
1.5
14.3
1.7
1.7
1.7
14.7
MLG0603S1N8†T
MLG0603S2N0†T
1.9
1.9
1.9
13.9
2.1
2.1
2.1
13.8
MLG0603S2N2†T
2.2
2.3
2.3
13.9
MLG0603S2N4†T
MLG0603S2N7†T
2.6
2.6
2.7
14.6
2.9
2.9
3.0
15.1
MLG0603S3N0†T
MLG0603S3N3†T
3.2
3.3
3.4
15.1
3.5
3.6
3.7
13.8
MLG0603S3N6†T
MLG0603S3N9†T
3.8
3.9
4.1
15.1
MLG0603S4N3†T
4.3
4.4
4.6
14.3
MLG0603S4N7†T
4.8
4.9
5.2
15.2
MLG0603S5N1†T
5.1
5.3
5.6
13.8
MLG0603S5N6†T
5.7
5.9
6.4
15.5
MLG0603S6N2†T
6.5
6.8
7.5
14.5
MLG0603S6N8†T
7.4
7.8
8.7
15.4
MLG0603S7N5†T
7.8
8.0
8.7
14.2
MLG0603S8N2†T
8.8
9.3
10.4
14.7
MLG0603S9N1†T
9.8
10.3
11.5
13.5
MLG0603S10N†T
11.5
12.3
14.5
14.9
MLG0603S12N†T
14.2
15.4
18.7
15.6
MLG0603S15N†T
20.1
23.0
32.6
15.2
MLG0603S18N†T
28.3
35.3
72.3
14.2
MLG0603S22N†T
40.4
55.8
231.8
14.8
MLG0603S27N†T
68.3
130.9
14.6
MLG0603S33N†T
144.5
14.2
MLG0603S39N†T
13.1
MLG0603S47N†T
12.8
MLG0603S56N†T
12.0
12.5
MLG0603S68N†T
MLG0603S82N†T
11.8
MLG0603SR10†T
10.5
∗ †: Please specify inductance tolerance, B (±0.1nH), C (±0.2nH), S (±0.3nH), H (±3%) or J (±5%).
Part No.
Inductance(nH)typ.
500MHz
800MHz
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.7
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.1
1.1
1.2
1.2
1.4
1.4
1.5
1.5
1.7
1.7
1.9
1.9
2.1
2.0
2.2
2.2
2.5
2.5
2.8
2.8
3.1
3.1
3.4
3.4
3.7
3.7
4.1
4.1
4.4
4.4
4.8
4.8
5.3
5.3
5.9
5.9
6.4
6.5
7.1
7.1
7.8
7.8
8.6
8.6
9.5
9.6
11.4
11.7
14.4
14.8
17.3
18.0
21.3
22.5
26.5
28.6
32.6
36.0
39.5
46.5
48.6
59.5
59.2
77.2
74.4
103.9
95.5
161.3
129.3
353.5
800MHz
19.9
18.9
18.4
19.8
21.4
20.4
19.3
18.3
18.7
18.3
18.3
18.8
18.4
18.9
18.0
17.7
17.9
18.6
19.4
19.2
17.8
19.4
18.3
19.5
17.5
19.6
18.3
19.4
18.0
18.2
16.9
18.4
19.3
18.5
17.0
17.3
16.7
15.9
13.7
12.5
10.9
10.7
8.2
4.4
1.8GHz
34.1
30.1
29.3
32.8
33.1
32.1
30.1
28.8
29.1
28.6
28.6
29.0
28.6
28.7
27.7
26.8
27.4
27.8
29.4
28.2
26.2
28.5
26.5
27.9
25.0
27.2
25.1
25.7
25.2
23.9
22.2
22.8
23.5
19.9
15.4
13.4
9.3
5.2
2.0GHz
34.8
32.1
31.7
34.2
34.7
34.1
31.8
30.3
30.5
30.3
30.0
30.4
30.1
30.1
29.2
27.9
28.5
28.8
30.6
29.2
27.0
29.4
27.3
28.6
25.5
27.8
25.4
25.7
25.6
24.0
22.3
22.4
22.7
18.3
12.9
10.1
4.9
0.5
2.4GHz
40.4
35.9
35.4
38.6
38.6
37.8
35.3
33.8
34.1
33.5
33.2
33.5
33.4
33.1
32.2
30.7
31.5
31.4
33.4
31.4
29.0
31.6
28.9
30.1
26.7
28.8
25.7
25.3
26.4
23.6
21.8
20.8
20.4
13.9
6.7
2.1
• All specifications are subject to change without notice.
006-01 / 20070702 / e521_mlg0603.fm
(4/4)
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS
Q vs. FREQUENCY CHARACTERISTICS
50
1000
1.0nH
33nH
3.3nH
30
10nH
10
Q
Inductance (nH)
40
100nH
100
3.3nH
20
10nH
1.0nH
1
10
100nH
0
10
100
1000
0
10
10000
Frequency(MHz)
33nH
100
1000
Frequency(MHz)
10000
PACKAGING STYLES
REEL DIMENSIONS
ø60±2.0
1.0
2.0±0.5
9.0±0.3
ø13±0.5
13.0±1.4
ø21±0.8
ø178±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
0.5max.
0.38±0.05
4.0±0.1
2.0±0.05
160min.
Taping
2.0±0.05
0.68±0.05
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
200min.
Drawing direction
300min.
Dimensions in mm
• All specifications are subject to change without notice.
006-01 / 20070702 / e521_mlg0603.fm