FM4001C RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION FM4007C SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * * Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.24 gram DO-214AB MECHANICAL DATA * Epoxy : Device has UL flammability classification 94V-0 0.125 (3.17) 0.115 (2.92) 0.245 (6.22) 0.220 (5.59) 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.008 (0.203) 0.004 (0.102) 0.320 (8.13) 0.305 (7.75) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75o C Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Thermal Resistance Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range FM4001C FM4002C FM4003C FM4004C FM4005C FM4006C FM4007C UNITS VRRM 50 100 200 400 600 800 1000 VRMS 35 70 140 280 420 560 700 Volts Volts VDC 50 100 200 400 600 800 1000 Volts IO 1.0 Amps I FSM 30 Amps (Note 2) RθJL (Note 3) Rθ JA CJ T J , T STG 60 100 15 -55 to + 150 SYMBOL FM4001C FM4002C FM4003C FM4004C FM4005C FM4006C FM4007C VF 1.1 Volts 30 uAmps 5.0 100 uAmps uAmps 0 0 C/ W C/ W pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Forward Voltage at 1.0A DC Maximum Full Load Reverse Current, Full cycle Average at TA = 75oC Maximum DC Average Reverse Current at Rated DC Blocking Voltage @T A = 25 o C IR @T A = 125 o C NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. Thermal resistance junction to terminal 6.0mm2 coppeer pads to each terminal. 3. Thermal resistance junction to ambient, 6.0mm2 coppeer pads to each terminal. UNITS 2002-6 PEAK FORWARD SURGE CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1.0 .8 .6 .4 Single Phase Half Wave 60Hz Resistive or Inductive Load .2 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 1.0 TJ = 25 .1 Pulse Width = 300us 1% Duty Cycle .01 .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( FM4001C THRU FM4007C ) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 40 30 20 10 8.3ms Single Half Sine-Wave (JEDED Method) 0 1 2 6 8 10 4 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 4 TJ = 100 1.0 .4 .1 .04 TJ = 25 .01 0 20 40 60 80 100 120 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 200 100 60 40 20 10 6 4 TJ = 25 2 1 .1 .2 .4 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 1.0 2 4 10 20 40 REVERSE VOLTAGE, ( V ) 100 RECTRON Mounting Pad Layout 0.185 MAX. (4.69 MAX.) 0.121 MIN. (3.07 MIN.) 0.060 MIN. (1.52 MIN.) 0.320 REF Dimensions in inches and (millimeters) RECTRON