Features Regulated Converters ● ● ● ● ● ● ● POWERLINE Compact AC-DC Power Supply 10 Watt PCB Mount Package Universal Input Voltage Range 3000VAC Isolation Low Output Ripple and Noise Short Circuit Protected UL Approved AC/DC-Converter RAC10-SB Series Selection Guide Part Number Input Range (VAC) Output Voltage (VDC) Output Current (mA) Efficiency RAC10-3.3SB 90-264 3.3 2500 70 RAC10-05SB 90-264 5 2000 72 RAC10-12SB 90-264 12 833 76 RAC10-15SB 90-264 15 667 75 RAC10-24SB 90-264 24 417 72 10 Watt Single Output (%) * add suffix "-DIN for DIN Rail mounting module (see seperate datasheet) Description Compact switching power module for PCB or DIN-rail mounting with cUL, UL Safety Approvals. Pin compatible with RAC5-SB Models. Specifications UL-60950 Certified ( typical at 25°C, nominal input voltage and after warm up time unless otherwise specified ) Input Voltage Range 90-264VAC or 120-370VDC Rated Power 10 Watts max. Input Frequency Range (for AC Input) 47-440Hz Input Current (full load) 220mA max. (115VAC) / 150mA max. (230VAC) Inrush Current (<2ms) 10A max. (115VAC) / 20A max. (230VAC) Leakage Current 14mA max. Output Voltage Accuracy (Full load) ±2% Line Voltage Regulation (low line, high line at full load) ±0.3% typ. Load Voltage Regulation ( 5% to 100% full load ) ±0.5% typ. Output Ripple and Noise (20MHz limited) 0.5% Vout + 50mVp-p max. Operating Frequency 125kHz typ. Efficiency at Full Load 3000VAC min. 125 ±0.02%/°C typ. 100 Isolation Resistance 100 MΩ min. Short Circuit Protection Continuous, Automatic Restart Operating Temperature Range (free air convection, with derating) -25°C to +70°C Storage Temperature Range -40°C to +85°C Humidity 95% RH max. Case Material Epoxy with Fibreglass (UL94V-0) Package Weight 54g DIN Rail Module Output Power (%) Temperature Coefficient www.recom-international.com (Ambient Temperature) see table Isolation Voltage (input to output) MTBF (+25°C) Derating Graph Natural Convection 75 50 25 0 -25 -10 0 50 60 70 80 90 100 Ambient Temperature Range (°C) 91g using MIL-HDBK-217F 330 x 103 hours 12-February-2007 291 RAC10-SB Series POWERLINE AC/DC-Converter Typical Application +Vout DC N 1.5A Slo Blo C2 47uF 50V C1 0.1uF 50V RAC10-12SB L Load -Vout DC Simplified Schematic L +Vout Rectifier -Vout N PWM Controller Isolation Reference & Error AMP Package Style and Pinning 52.40 3rd angle projection 27.20 23.50 Pin Connections 10.0 Pin # 1.0 45.72 1 20.32 2 4 2.54 2 VAC in (L) 3 +VDC out 3 1 Bottom View VAC in (N) 4 -VDC out XX.X ± 0.5 mm XX.XX ± 0.25 mm Recommended Footprint Details 13.60 10.16 Single Out Top View 4 10.16 10.16 1 2 3 2.54 1.2ø+0.2/0.1 See DIN Rail Modules for DIN rail mounting option 292 12-February-2007 www.recom-international.com