RECOM RAC03

Features
Regulated
Converters
●
●
●
●
●
●
●
●
●
Ultracompact Low Profile AC-DC Power Supply
3 Watt PCB Mount Package
Universal Input Voltage Range
Class II Power Supply with 3kVAC Isolation
Only 80mW Consumption in Standby
-25°C to +85°C Operating Temperature
Low Output Ripple/Noise
Short Circuit Protected Outputs
EN and CE Certified
POWERLINE
AC/DC-Converter
with 3 year Warranty
3 Watt
Single
Output
Selection Guide
Part
Number
Output
Voltage
(VDC)
3.3
Output
Current
(mA)
900
Efficiency
RAC03-3.3SC
Input
Range
(VAC)
90-264
(%)
63
Max
Capacitive
Load
2200µF
RAC03-3.8SC
90-264
3.8
900
63
2200µF
RAC03-05SC
90-264
5
600
73
2200µF
RAC03-09SC
90-264
9
333
76
1200µF
RAC03-12SC
90-264
12
250
76
1000µF
RAC03-15SC
90-264
15
200
76
680µF
RAC03-24SC
90-264
24
125
78
330µF
RoHS
2002/95/EC
6/6
Specifications
(Ta=25°C and after warm up time, measured at 115VAC/60Hz and 230VAC/50Hz )
Input Voltage Range
90-264VAC or 120-370VDC
3 Watts max.
Input Frequency Range (for AC Input)
40-63Hz
115/230VAC
85mA/40mA max.
No Load Power Consumption
Inrush Current (<0.5ms)
80mW typ.
115/230VAC
10/20A max.
Leakage Current
1.5mA max.
Output Voltage Tolerance (combined Tolerance, Line Reg and Load Reg at full load)
±5% max.
Line Voltage Regulation
low line, high line at full load
±3% max.
Load Voltage Regulation
Output Ripple and Noise
(20MHz BW limited)
10% to 100% full load
3.3V, 3.8V Output
All others
±6% max.
120mVp-p max.
100mVp-p max.
Operating Frequency
45kHz typ
Leakage Current
Minimum Load = 0%
RMS Isolation Voltage (input to output)
1.5mA max.
specifications valid for 10% minimum load only
3kVAC / 1 minute
Isolation Resistance
1 GΩ min.
Isolation Capacitance
1000pF typ.
Short Circuit Protection
Overtemperature Protection
Operating Temperature Range
Internal Junction Temperature
Temperature Hysteresis
(natural convection, without derating)
(natural convection, with derating)
Automatic Restart
135°C typ.
20°C typ.
-25°C to +75°C
-25°C to +85°C
Storage Temperature Range
Humidity
Case Material
-40°C to +85°C
non-condensing
95% RH max
Plastic Case, Epoxy filled (UL94V-0)
Package Weight
30g
Packing Quantity
12 pcs
PA-6
RAC03-C
REV: 2/2011
Description
The RAC03-C series is an ultra-compact
universal input AC/DC power module for PCB
mounting. It features high efficiency, low
standby power, high operating temperature,
soft start, low output ripple/noise, overload
and short-circuit protection as well as a
built-in EMC Class B filter. Output voltages
range from 3.3VDC to 24VDC, including a
3.8VDC version designed for battery
chargers and GSM modems.
Derating Graph (Ambient)
125
Natural Convection
100
Output Power (%)
RAC03-C
Rated Power
Input Current (full load)
EN-60950-1 Pending
UL-60950-1 Pending
75
50
25
0
-25
0
70 80 90 100
75 85
Ambient Temperature Range (°C)
50
Please Read Application Notes
www.recom-electronic.com
RAC03-SC
Series
POWERLINE
AC/DC-Converter
Specifications (typical at 25°C and after warm up time unless otherwise specified )
RAC05-05SC
Conducted and Radiated
Noise Immunity
Efficiency / Load
EN 55022 Class B
EN 55024
100
80
MTBF
+25°C
>550 x 103 hours
230VAC
+55°C
>285 x 103 hours
using MIL-HDBK-217F
+80°C
>76 x 10 hours
3
Certifications:
Efficiency %
EMC
(Pending)
UL-60950-1, 2nd Edition
20
EN General Safety
(Pending)
EN-60950-1, 2nd Edition
0
Report: 2011-04-19
EN55022 Class B
230VAC
40
UL General Safety
CE
115VAC
60
3rd angle
projection
0%
20%
40%
80%
60%
Total Output current (%)
100%
Standard Package Style and Pinning
23.90
37.80
15.65
16.40
±0.25
Pin Connections
Pin #
5.0
6.1
1.0ø
Standoff height
0.75±0.25
17.78
Allow 5mm clearance around converter for air circulation
1.20 ø+0.2/–0.1
5.08
5.08
3
VAC in (L)
3
VAC in (N)
13
NC
14
-VDC out
16
+VDC out
NC = No Connection
13
Leave Clear
of
PCB Traces
17.78
Bottom View
16
RAC03-C
1
20.32
Single Output
1
Tolerance
± 0.5 mm
unless otherwise specified
2.54
14
Top View
2.54
Recommended Application Circuit
Compact single output regulated power supply
Suggested fuse rating: 1A Slow Blow
An external MOV is required for 230VAC operation. The varistor should comply with IEC-61051-2. e.g. Epcos S14 Series
L
1A Fuse
Vout+
VACin (L)
MOV
- required for
230VAC Surge
Protection only
N
C1(Optional)
330uF
RAC03-05SC
VACin (N)
Load
Vout-
Add C1 to reduce output ripple (use low ESR type)
www.recom-international.com
REV:2/2011
PA-7