IRF IRHMK57260SE

PD-96915
RADIATION HARDENED
IRHMK57260SE
POWER MOSFET
200V, N-CHANNEL
SURFACE MOUNT (Low-Ohmic TO-254AA)
5 TECHNOLOGY
™
Product Summary
Part Number
IRHMK57260SE
Radiation Level RDS(on)
100K Rads (Si)
0.044Ω
ID
45A
Low-Ohmic
TO-254AA Tabless
International Rectifier’s R5 TM technology provides
high performance power MOSFETs for space
applications. These devices have been characterized
for Single Event Effects (SEE) with useful performance
up to an LET of 80 (MeV/(mg/cm2)). The combination
of low RDS(on) and low gate charge reduces the
power losses in switching applications such as DC
to DC converters and motor control. These devices
retain all of the well established advantages of
MOSFETs such as voltage control, fast switching,
ease of paralleling and temperature stability of
electrical parameters.
Features:
n
n
n
n
n
n
n
n
n
n
Low RDS(on)
Fast Switching
Single Event Effect (SEE) Hardened
Low Total Gate Charge
Simple Drive Requirements
Ease of Paralleling
Hermetically Sealed
Ceramic Eyelets
Electrically Isolated
Light Weight
Absolute Maximum Ratings
Pre-Irradiation
Parameter
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
T STG
Units
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current À
Max. Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy Á
Avalanche Current À
Repetitive Avalanche Energy À
Peak Diode Recovery dv/dt Â
Operating Junction
Storage Temperature Range
45
29
180
208
1.67
±20
256
45
20.8
19.8
-55 to 150
Pckg. Mounting Surface Temp.
Weight
300 (for 5s)
8.0 (Typical)
A
W
W/°C
V
mJ
A
mJ
V/ns
o
C
g
For footnotes refer to the last page
www.irf.com
1
12/24/04
IRHMK57260SE
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Min
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
Typ Max Units
200
—
—
V
—
0.25
—
V/°C
—
—
0.044
Ω
2.5
35
—
—
—
—
—
—
4.5
—
10
25
V
S( )
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.8
100
-100
165
45
75
35
125
80
50
—
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
VGS = 12V, ID = 29A Ã
nC
VDS = VGS, ID = 1.0mA
VDS = 15V, IDS = 29A Ã
VDS= 160V ,VGS=0V
VDS = 160V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 45A
VDS = 100V
ns
VDD = 100V, ID = 45A
VGS =12V, RG = 2.35Ω
Ω
Parameter
BVDSS
Drain-to-Source Breakdown Voltage
∆BV DSS /∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
VGS(th)
Gate Threshold Voltage
g fs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
µA
nA
nH Measured from Drain lead (6mm /0.25in.
from package) to Source lead (6mm /0.25in.
from package) with Source wires internally
bonded from Source Pin to Drain Pad
Ciss
Coss
Crss
Rg
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Internal Gate Resistance
—
—
—
—
5295
900
37
1.47
—
—
—
—
pF
VGS = 0V, VDS = 25V
f = 1.0MHz
Ω
f = 0.89MHz, open drain
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
ISM
VSD
t rr
Q RR
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) À
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
ton
Forward Turn-On Time
—
—
—
—
—
—
—
—
—
—
45
180
1.2
450
6.9
Test Conditions
A
V
ns
µC
Tj = 25°C, IS = 45A, VGS = 0V Ã
Tj = 25°C, IF = 45A, di/dt ≤100A/µs
VDD ≤ 25V Ã
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
R thJC
RthCS
RthJA
Junction-to-Case
Case-to-Sink
Junction-to-Ambient
Min Typ Max Units
—
—
—
— 0.60
0.21 —
—
48
Test Conditions
°C/W
Typical socket mount
Note: Corresponding Spice and Saber models are available on International Rectifier Web site.
For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics
Pre-Irradiation
IRHMK57260SE
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ÄÅ
Parameter
BVDSS
V GS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
100K Rads (Si)
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source „
On-State Resistance (TO-3)
Static Drain-to-Source On-state „
Resistance (Low-Ohmic TO-254)
„
Diode Forward Voltage
Min
Max
200
2.0
—
—
—
—
4.5
100
-100
10
Units
Test Conditions ˆ
µA
VGS = 0V, ID = 1.0mA
VGS = VDS, ID = 1.0mA
VGS = 20V
VGS = -20V
VDS=160V, VGS=0V
V
nA
—
0.049
Ω
VGS = 12V, ID = 35A
—
0.044
Ω
VGS = 12V, ID = 35A
—
1.2
V
VGS = 0V, ID = 45A
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion
Br
I
Au
LET
MeV/(mg/cm2))
37
60
82
VDS (V)
Range
(µm) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V
39
200
200
200
200
200
32
200
200
200
185
120
28
200
200
150
50
25
Energy
(MeV)
305
340
350
250
VDS
200
Br
I
Au
150
100
50
0
0
-5
-10
-15
-20
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHMK57260SE
Pre-Irradiation
1000
1000
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
TOP
100
10
ID, Drain-to-Source Current (A)
ID, Drain-to-Source Current (A)
TOP
100
1
0.1
5.0V
60µs PULSE WIDTH, Tj = 25°C
0.01
10
5.0V
1
60µs PULSE WIDTH
Tj = 150°C
0.1
0.01
0.1
1
10
100
0.01
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
T J = 150°C
T J = 25°C
10
1
VDS = 50V
15
60µs PULSE WIDTH
5
6
7
8
9
10
VGS, Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
4
RDS(on) , Drain-to-Source On Resistance
(Normalized)
ID, Drain-to-Source Current (A)
3.0
0.1
1
10
100
Fig 2. Typical Output Characteristics
1000
100
0.1
VDS , Drain-to-Source Voltage (V)
ID = 45A
2.5
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 12V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
VGS = 0V,
f = 1MHz
Ciss = Cgs + Cgd , Cds SHORTED
Crss = Cgd
Coss = Cds + Cgd
C, Capacitance (pF)
8000
Ciss
6000
Coss
4000
Crss
2000
0
1
10
20
VGS , Gate-to-Source Voltage (V)
10000
IRHMK57260SE
12
8
4
VDS , Drain-to-Source Voltage (V)
FOR TEST CIRCUIT
SEE FIGURE 13
0
40
80
120
160
200
QG , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
1000
ID, Drain-to-Source Current (A)
1000
ISD, Reverse Drain Current (A)
VDS = 160V
VDS = 100V
VDS = 40V
16
0
100
ID = 45A
OPERATION IN THIS AREA
LIMITED BY R DS(on)
100
100
T J = 150°C
T J = 25°C
10
100µs
10
1ms
1
VGS = 0V
0.1
1
0.2
0.4
0.6
0.8
1.0
1.2
VSD , Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
1.4
10ms
Tc = 25°C
Tj = 150°C
Single Pulse
1.0
10
100
1000
VDS , Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
5
IRHMK57260SE
Pre-Irradiation
50
VGS
40
I D , Drain Current (A)
RD
VDS
D.U.T.
RG
30
+
-VDD
VGS
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
20
Fig 10a. Switching Time Test Circuit
VDS
10
90%
0
25
50
75
100
125
150
TC , Case Temperature ( °C)
10%
VGS
Fig 9. Maximum Drain Current Vs.
Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
1
Thermal Response ( Z thJC )
D = 0.50
0.20
0.1
0.10
0.05
0.02
0.01
0.01
P DM
t1
SINGLE PULSE
( THERMAL RESPONSE )
t2
0.001
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
0.0001
1E-006
1E-005
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHMK57260SE
15V
D.U.T.
RG
VGS
20V
DRIVER
L
VDS
+
- VDD
IAS
A
0.01Ω
tp
Fig 12a. Unclamped Inductive Test Circuit
EAS , Single Pulse Avalanche Energy (mJ)
500
ID
20A
28.5A
BOTTOM 45A
TOP
400
300
200
100
0
25
50
V(BR)DSS
75
100
125
150
Starting T J , Junction Temperature (°C)
tp
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
I AS
Current Regulator
Same Type as D.U.T.
Fig 12b. Unclamped Inductive Waveforms
50KΩ
QG
12 V
QGS
.3µF
D.U.T.
QGD
+
V
- DS
VGS
VG
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
12V
.2µF
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
7
IRHMK57260SE
Pre-Irradiation
Footnotes:
À Repetitive Rating; Pulse width limited by
maximum junction temperature.
Á VDD = 50V, starting TJ = 25°C, L= 0.25mH
Peak IL = 45A, VGS =12V
 ISD ≤ 45A, di/dt ≤ 375A/µs,
VDD ≤ 200V, TJ ≤ 150°C
à Pulse width ≤ 300 µs; Duty Cycle ≤ 2%
Ä Total Dose Irradiation with VGS Bias.
12 volt VGS applied and VDS = 0 during
irradiation per MIL-STD-750, method 1019, condition A.
Å Total Dose Irradiation with VDS Bias.
160 volt VDS applied and VGS = 0 during
irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions — Low-Ohmic TO-254AA Tabless
NOT ES :
1.
2.
3.
4.
DIMENS IONING & T OLERANCING PER AS ME Y14.5M-1994.
ALL DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ].
CONTROLLING DIMENS ION: INCH.
T HIS OUT LINE IS A MODIFIED TO-254AA JEDEC OUT LINE.
PIN ASSIGNMENTS
1 = DRAIN
2 = SOURCE
3 = GATE
CAUTION
BERYLLIA WARNING PER MIL-PRF-19500
Packages containing beryllia shall not be ground, sandblasted, machined, or have other operations performed on them
which will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids
that will produce fumes containing beryllium.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 12/2004
8
www.irf.com