IRF IRHNJ57133SE

PD - 94294C
IRHNJ57133SE
JANSR2N7485U3
130V, N-CHANNEL
RADIATION HARDENED
POWER MOSFET
SURFACE MOUNT (SMD-0.5)
REF: MIL-PRF-19500/704
5
TECHNOLOGY
™
Product Summary
Part Number Radiation Level RDS(on)
IRHNJ57133SE 100K Rads (Si) 0.08Ω
I D QPL Part Number
20A JANSR2N7485U3
SMD-0.5
International Rectifier’s R5 TM technology provides
high performance power MOSFETs for space
applications. These devices have been characterized
for Single Event Effects (SEE) with useful performance
up to an LET of 80 (MeV/(mg/cm2)). The combination
of low RDS(on) and low gate charge reduces the
power losses in switching applications such as DC
to DC converters and motor control. These devices
retain all of the well established advantages of
MOSFETs such as voltage control, fast switching,
ease of paralleling and temperature stability of
electrical parameters.
Features:
n
n
n
n
n
n
n
n
n
Single Event Effect (SEE) Hardened
Ultra Low RDS(on)
Low Total Gate Charge
Simple Drive Requirements
Ease of Paralleling
Hermetically Sealed
Surface Mount
Ceramic Package
Light Weight
Absolute Maximum Ratings
Pre-Irradiation
Parameter
ID @ VGS = 12V, TC = 25°C
ID @ VGS = 12V, TC = 100°C
IDM
PD @ TC = 25°C
VGS
EAS
IAR
EAR
dv/dt
TJ
T STG
Continuous Drain Current
Continuous Drain Current
Pulsed Drain Current À
Max. Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy Á
Avalanche Current À
Repetitive Avalanche Energy À
Peak Diode Recovery dv/dt Â
Operating Junction
Storage Temperature Range
Pckg. Mounting Surface Temp.
Weight
Units
20
12.5
80
75
0.6
±20
65
20
7.5
7.7
-55 to 150
A
W
W/°C
V
mJ
A
mJ
V/ns
o
C
300 (for 5s)
1.0(Typical)
g
For footnotes refer to the last page
www.irf.com
1
05/14/04
IRHNJ57133SE, JANSR2N7485U3
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
Drain-to-Source Breakdown Voltage
130
—
—
V
—
0.16
—
V/°C
Reference to 25°C, ID = 1.0mA
—
—
0.08
Ω
VGS = 12V, ID = 12.5A
2.5
8.0
—
—
—
—
—
—
4.5
—
10
25
V
S( )
∆BV DSS /∆T J Temperature Coefficient of Breakdown
Voltage
RDS(on)
Static Drain-to-Source On-State
Resistance
VGS(th)
Gate Threshold Voltage
g fs
Forward Transconductance
IDSS
Zero Gate Voltage Drain Current
Typ Max Units
µA
IGSS
IGSS
Qg
Q gs
Q gd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain (‘Miller’) Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Inductance
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
4.0
100
-100
48
16
18
20
100
35
40
—
Ciss
C oss
C rss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
—
—
—
970
300
20
—
—
—
nA
nC
ns
nH
pF
Test Conditions
VGS = 0V, ID = 1.0mA
Ω
BVDSS
Ã
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 12.5A Ã
VDS= 104V ,VGS=0V
VDS = 104V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID = 20A
VDS = 65V
VDD = 65V, ID = 20A,
VGS =12V, RG = 7.5Ω
Measured from the center of
drain pad to center of source pad
VGS = 0V, VDS = 25V
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
IS
ISM
Continuous Source Current (Body Diode)
Pulse Source Current (Body Diode) À
—
—
—
—
20
80
A
VSD
trr
Q RR
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
—
—
—
—
—
—
1.2
250
1.5
V
nS
µC
ton
Forward Turn-On Time
Test Conditions
Tj = 25°C, IS = 20A, VGS = 0V Ã
Tj = 25°C, IF = 20A, di/dt ≤ 100A/µs
VDD ≤ 25V Ã
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction-to-Case
Junction-to-PC board
Min Typ Max
—
—
—
6.6
1.67
—
Units
°C/W
Test Conditions
soldered to a 2” square copper-clad board
Note: Corresponding Spice and Saber models are available on International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics
IRHNJ57133SE, JANSR2N7485U3
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability.
The hardness assurance program at International Rectifier is comprised of two radiation environments.
Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both
pre- and post-irradiation performance are tested and specified using the same drive circuitry and test
conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25°C, Post Total Dose Irradiation ÄÅ
Parameter
BVDSS
VGS(th)
IGSS
IGSS
IDSS
RDS(on)
RDS(on)
VSD
100K Rads (Si)
Drain-to-Source Breakdown Voltage
Gate Threshold Voltage
Gate-to-Source Leakage Forward
Gate-to-Source Leakage Reverse
Zero Gate Voltage Drain Current
Static Drain-to-Source „
On-State Resistance (TO-3)
Static Drain-to-Source „
On-State Resistance (SMD-0.5)
„
Diode Forward Voltage
Units
Test Conditions ˆ
Min
Max
130
2.0
—
—
—
—
4.5
100
-100
10
nA
µA
VGS = 0V, ID = 1.0mA
VGS = VDS, ID = 1.0mA
VGS = 20V
VGS = -20V
VDS=104V, VGS=0V
—
0.082
Ω
VGS = 12V, ID = 12.5A
—
0.08
Ω
VGS = 12V, ID = 12.5A
—
1.2
V
VGS = 0V, ID = 20A
V
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for
Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion
Br
I
Au
LET
MeV/(mg/cm2))
36.7
59.8
82.3
VDS (V)
Range
(µm) @VGS=0V @VGS=-5V @VGS=-10V @VGS=-15V @VGS=-20V
39.5
130
130
130
130
130
32.5
130
130
130
100
50
28.4
130
120
30
—
—
Energy
(MeV)
309
341
350
150
VDS
120
Br
90
I
60
Au
30
0
0
-5
-10
-15
-20
VGS
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHNJ57133SE, JANSR2N7485U3
100
Pre-Irradiation
100
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
10
1
5.0V
0.1
20µs PULSE WIDTH
TJ = 25 °C
0.01
0.1
1
10
10
0.1
100
2.5
RDS(on) , Drain-to-Source On Resistance
(Normalized)
I D , Drain-to-Source Current (A)
TJ = 25 ° C
TJ = 150 ° C
10
1
V DS = 15
50V
20µs PULSE WIDTH
9
11
13
15
VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
4
1
10
100
Fig 2. Typical Output Characteristics
100
7
20µs PULSE WIDTH
TJ = 150 °C
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
5
5.0V
1
0.01
0.1
VDS , Drain-to-Source Voltage (V)
0.1
VGS
15V
12V
10V
9.0V
8.0V
7.0V
6.0V
BOTTOM 5.0V
TOP
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
TOP
ID = 20A
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = 12V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
www.irf.com
Pre-Irradiation
2500
20
VGS , Gate-to-Source Voltage (V)
VGS = 0V,
f = 1MHz
Ciss = Cgs + Cgd , Cds SHORTED
Crss = Cgd
Coss = Cds + Cgd
2000
C, Capacitance (pF)
IRHNJ57133SE, JANSR2N7485U3
1500
Ciss
Coss
1000
500
0
Crss
1
10
12
8
4
VDS , Drain-to-Source Voltage (V)
FOR TEST CIRCUIT
SEE FIGURE 13
0
8
16
24
32
40
QG , Total Gate Charge (nC)
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
100
1000
ID, Drain-to-Source Current (A)
ISD , Reverse Drain Current (A)
VDS = 104V
VDS = 65V
VDS = 26V
16
0
100
ID = 20A
TJ = 150 ° C
100
10
TJ = 25 ° C
1
V GS = 0 V
0.1
0.4
0.6
0.8
1.0
1.2
VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
www.irf.com
OPERATION IN THIS AREA
LIMITED BY R DS(on)
1.4
100µs
10
1ms
1
0.1
Tc = 25°C
Tj = 150°C
Single Pulse
1
10ms
10
100
1000
VDS , Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
5
IRHNJ57133SE, JANSR2N7485U3
Pre-Irradiation
20
RD
VDS
VGS
ID , Drain Current (A)
16
D.U.T.
RG
12
+
-V DD
VGS
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
8
Fig 10a. Switching Time Test Circuit
4
VDS
90%
0
25
50
75
100
125
TC , Case Temperature ( °C)
150
10%
VGS
Fig 9. Maximum Drain Current Vs.
Case Temperature
td(on)
tr
t d(off)
tf
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJC )
10
1 D = 0.50
0.20
0.10
0.1
0.01
0.00001
PDM
0.05
0.02
0.01
t1
SINGLE PULSE
(THERMAL RESPONSE)
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
t1, Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHNJ57133SE, JANSR2N7485U3
15V
L
VDS
D.U.T.
RG
VGS
20V
IAS
DRIVER
+
- VDD
0.01Ω
tp
Fig 12a. Unclamped Inductive Test Circuit
V(BR)DSS
A
EAS , Single Pulse Avalanche Energy (mJ)
125
ID
9.0A
12.6A
BOTTOM 20A
TOP
100
75
50
25
0
25
50
75
100
125
Starting TJ , Junction Temperature ( °C)
150
tp
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
I AS
Current Regulator
Same Type as D.U.T.
Fig 12b. Unclamped Inductive Waveforms
50KΩ
QG
12 V
QGS
.3µF
D.U.T.
QGD
+
V
- DS
VGS
VG
3mA
Charge
Fig 13a. Basic Gate Charge Waveform
www.irf.com
12V
.2µF
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
7
IRHNJ57133SE, JANSR2N7485U3
Pre-Irradiation
Footnotes:
À Repetitive Rating; Pulse width limited by
maximum junction temperature.
Á VDD = 50V, starting TJ = 25°C, L= 0.3 mH
Peak IL = 20A, VGS = 12V
 ISD ≤ 20A, di/dt ≤ 365A/µs,
VDD ≤ 130V, TJ ≤ 150°C
à Pulse width ≤ 300 µs; Duty Cycle ≤ 2%
Ä Total Dose Irradiation with VGS Bias.
12 volt VGS applied and V DS = 0 during
irradiation per MIL-STD-750, method 1019, condition A.
Å Total Dose Irradiation with VDS Bias.
104 volt VDS applied and VGS = 0 during
irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions — SMD-0.5
PAD ASSIGNMENTS
1 = DRAIN
2 = GATE
3 = SOURCE
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.
Data and specifications subject to change without notice. 05/2004
8
www.irf.com