Hyper CHIPLED Hyper-Bright LED LS R976, LO R976, LY R976 Besondere Merkmale Features • Gehäusetyp: 0805 • Besonderheit des Bauteils: extrem kleine Bauform 2,0 mm x 1,25 mm x 0,8 mm • Wellenlänge: 632 nm (super-rot), 605 nm (orange), 587 nm (gelb) • Abstrahlwinkel: extrem breite Abstrahlcharakteristik (160°) • Technologie: InGaAlP • optischer Wirkungsgrad: 7 lm/W (super-rot), 11 lm/W (orange, gelb) • Verarbeitungsmethode: für alle SMT-Bestücktechniken geeignet • Lötmethode: IR Reflow Löten • Vorbehandlung: nach JEDEC Level 2 • Gurtung: 8 mm Gurt mit 4000/Rolle, ø180 mm • package: 0805 • feature of the device: extremely small package 2.0 mm x 1.25 mm x 0.8 mm • wavelength: 632 nm (super-red), 605 nm (orange), 587 nm (yellow) • viewing angle: extremely wide (160°) • technology: InGaAlP • optical efficiency: 7 lm/W (super-red), 11 lm/W (orange, yellow) • assembly methods: suitable for all SMT assembly methods • soldering methods: IR reflow soldering • preconditioning: acc. to JEDEC Level 2 • taping: 8 mm tape with 4000/reel, ø180 mm Anwendungen Applications • Informationsanzeigen im Außenbereich • Einkopplung in Lichtleiter • Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) • Signal- und Symbolleuchten • Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.ä.) • Spielsachen • outdoor displays • coupling into light guides • backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting) • signal and symbol luminaire • marker lights (e.g. steps, exit ways, etc.) • toys 2001-02-12 1 LS R976, LO R976, LY R976 Typ Emissionsfarbe Type Color of Emission Farbe der Lichtaustrittsfläche Color of the Light Emitting Area Lichtstärke Bestellnummer Luminous Intensity IF = 20 mA IV (mcd) Ordering Code min. typ. LS R976 super-red colorless diffused 18 50 Q62702-P5178 LO R976 orange colorless diffused 28 70 Q62702-P5176 LY R976 yellow colorless diffused 28 60 Q62702-P5177 Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ± 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ± 11%. Anm.: gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: Total color tolerance range, delivery in single groups (please see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2001-02-12 2 LS R976, LO R976, LY R976 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top – 30 … + 85 °C Lagertemperatur Storage temperature range Tstg – 40 … + 85 °C Sperrschichttemperatur Junction temperature Tj + 95 °C Durchlassstrom Forward current IF 25 mA Stoßstrom Surge current tp = 10 µs, D = 0.1 IFM 0.1 A Sperrspannung Reverse voltage VR 5 V Leistungsaufnahme Power consumption Ptot 65 mW 800 K/W 450 K/W Wärmewiderstand Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lötpad Junction/solder point Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2) mounted on PC board FR 4 (pad size ≥ 16 mm 2) 2001-02-12 3 LS R976, LO R976, LY R976 Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LS LO LY Wellenlänge des emittierten Lichtes Wavelength at peak emission IF = 20 mA (typ.) λpeak 645 610 591 nm Dominantwellenlänge 1) Dominant wavelength IF = 20 mA (typ.) λdom 633 ±6 606 ±6 588 ±8 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) ∆λ 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2ϕ 160 160 160 Grad deg. Durchlassspannung 2) Forward voltage IF = 20 mA (typ.) (max.) VF VF 2.0 2.4 2.0 2.4 2.0 2.4 V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 100 0.01 100 0.01 100 µA µA Temperaturkoeffizient von λpeak Temperature coefficient of λpeak IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCλpeak 0.14 0.13 0.13 nm/K Temperaturkoeffizient von λdom Temperature coefficient of λdom IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCλdom 0.01 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; –10°C ≤ T ≤ 100°C (typ.) TCV – 2.0 – 1.7 – 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) ηopt 7 11 11 lm/W 1) Wellenlängengruppen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt. Wavelength groups are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm. 2) Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0.1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V. 2001-02-12 4 LS R976, LO R976, LY R976 1) Wellenlängengruppen für LY R976 Wavelength groups for LY R976 Gruppe Group Wellenlänge Wavelength Einheit Unit min. max. 3 580 584 nm 4 584 588 nm 5 588 592 nm 6 592 596 nm 2001-02-12 5 LS R976, LO R976, LY R976 Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 20 mA Relative Spectral Emission V(λ) = spektrale Augenempfindlichkeit Standard eye response curve OHL00555 100 Ι rel % orange super-red 80 Vλ yellow 60 40 20 0 400 450 500 550 600 650 nm λ 700 Abstrahlcharakteristik Irel = f (ϕ) Radiation Characteristic 40˚ 30˚ 20˚ 10˚ 0˚ ϕ 50˚ OHL00408 1.0 0.8 0.6 60˚ 0.4 70˚ 0.2 80˚ 0 90˚ 100˚ 1.0 2001-02-12 0.8 0.6 0.4 0˚ 20˚ 6 40˚ 60˚ 80˚ 100˚ 120˚ LS R976, LO R976, LY R976 Durchlassstrom IF = f (VF) Forward Current TA = 25 °C Relative Lichtstärke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 °C OHL00232 10 2 mA 5 OHL00642 10 1 ΙV Ι V (20 mA) IF 10 0 5 10 1 5 10 -1 5 10 0 super-red, orange 10 -2 5 yellow 5 10 -1 10 -3 1 1.4 1.8 2.2 2.6 10 -2 3 V 3.4 10 -1 10 0 10 1 mA 10 2 ΙF VF Maximal zulässiger Durchlassstrom IF = f (T) Max. Permissible Forward Current Relative Lichtstärke IV/IV(25 °C) = f (TA) Relative Luminous Intensity IF = 20 mA OHL00420 30 OHL00641 2 mA IV IV (25 ˚C) I F 25 1.6 orange yellow super-red 20 1.2 15 0.8 10 0 orange yellow super-red 0.4 5 0 -20 0 10 20 30 40 50 60 70 80 °C 100 2001-02-12 0 20 40 60 ˚C 100 TA TA 7 LS R976, LO R976, LY R976 Maßzeichnung Package Outlines 0.4 (0.016) 1.25 (0.049) 1.05 (0.041) 0.3 (0.012) 0.5 (0.020) 1.1 (0.043) 0.9 (0.035) 1.2 (0.047) 0.2 (0.008) 1.4 (0.055) Cathode mark 0.9 (0.035) 0.7 (0.028) 2.1 (0.083) 1.9 (0.075) ø0.6 (ø0.024) ø0.4 (ø0.016) 1.35 (0.053) 1.15 (0.045) Cathode mark Soldering terminal may flow in x, y direction GEOY6024 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Gewicht / Approx. weight: 3.2 mg 2001-02-12 8 LS R976, LO R976, LY R976 Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLA0685 250 Tmax = 245 ˚C ˚C T 200 t = 70 s T = 183 ˚C 150 2-3 K/s 100 2-3 K/s 50 0 0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 t IR Reflow Löten IR Reflow Soldering 1.2 (0.047) Empfohlenes Lötpaddesign Recommended Solder Pad 1.2 (0.047) 0.9 (0.035) 1.2 (0.047) OHAPY607 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2001-02-12 9 5:00 min 5:30 LS R976, LO R976, LY R976 Gurtung / Polarität und Lage Verpackungseinheit 4000/Rolle, ø180 mm Method of Taping / Polarity and Orientation Packing unit 4000/reel, ø180 mm Processive direction 2 (0.079) 1.5 (0.059) 4 (0.157) Cathode mark 4 (0.157) 8 (0.315) 1.75 (0.069) 3.5 (0.138) 1.6 (0.063) (2.4 (0.094)) C A OHAY0530 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2001-02-12 10 LS R976, LO R976, LY R976 Revision History: 2001-02-12 Previous Version: Page 2001-02-12 Subjects (major changes since last revision) Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2001-02-12 11