TOTAL POWER INT'L MBU100 Series 1Watt Ultra Miniature High SIP DC/DC Converters with Single Output Key Features l SMT Technology l Miniture Package l I / O Isolation 1000VDC l Efficiency Up To 80% l MTBF > 2,000,000 Hours l Low Cost +Vo +Vin Bipolar Push-Pull Inverter -Vin -Vo Mechanical Configuration Pin Connections 0.45 (11.5) 0.40 (10.2) 0.02 (0.5) 0.10 (2.54) 1 0.126 (3.2) 0.02 (0.5) 2 3 4 0.07 (1.80) T 0.01 (0.25) All dimensions typical in inches (mm). Tolerance= +/- 0.01 (+/- 0.25) Pin Function 1 -Input 2 +Input 3 -Output 4 +Output Physical Characteristics Case Size ( 5 & 12V Input) 11.5*6.1*10.2 mm 0.45*0.24*0.40 inches Case Size ( 24V Input) 11.5*7.1*10.2 mm 0.45*0.28*0.40 inches Case Material Non-Conductive Black Plastic Weight 1.3g( 5 & 12V Input ) 1.7g( 24V Input ) TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -1- TOTAL POWER INT'L MBU100 Absolute Maximum Ratings Exceeding these values can damage the module.These are not continuous operating ratings. Parameter Input Surge Voltage ( 1000 mS ) Min. Max. Unit. 5VDC Input Models -0.7 9 VDC 12VDC Input Models -0.7 18 VDC 24VDC Input Models -0.7 30 VDC --- 450 mW Internal Power Dissipation Environmental Specifications Parameter Conditions Operating Temperature Min. Typ. Max. Unit -25 --- +75 ] Storage Temperature -40 --- +125 ] Humidity --- --- 95 % Cooling Free-Air Convection Model Selection Guide Model Number Input voltage Output Voltage Output Current Output Current VDC VDC mA (Max.) mA (Min.) Input Current Max. Load mA (Typ.) 5 200 4 9 110 2 12 84 1.5 15 67 1 5 200 9 110 12 MBU101 MBU102 MBU103 5 (4.5 ~ 5.5) MBU104 MBU111 MBU112 MBU113 12 (10.8 ~ 13.2) Input Current No Load mA (Typ.) Load Regulation Efficiency % (Max.) % (Typ.) 290 11 69 260 8 76 262 7 77 258 6 78 4 117 9 71 2 107 5 77 84 1.5 106 5 79 30 13 MBU114 15 67 1 105 4 80 MBU115 5 200 4 60 8 70 MBU116 MBU117 24 (21.6 ~ 26.4) MBU118 9 110 2 54 5 76 12 84 1.5 53 4 79 15 67 1 53 4 79 7 Specifications typical at Ta=+25],resistive load,nominal input voltage,rated output current unless otherwise noted. Input Specifications Parameter Input Voltage Range Reverse Polarity Input Current Input Filter Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 --- 0.3 All Models --- Internal Capacitor TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -2- Unit VDC A TOTAL POWER INT. MBU100 Output Specifications Parameter Conditions Output Voltage Accuracy Line Regulation For Vin Change 1% Load Regulation Io=20% to 100% Typ. Max. Unit --- {1.0 {3.0 % --- {1.2 {1.5 % See Model Selection Guide Ripple & Noise (20MHz) Ripple & Noise (20MHz) Min. Over Line,Load & Temp. Ripple & Noise (20MHz) % --- 100 150 mV P-P --- --- 200 mV P-P --- --- 5 mV rms. Over Load 120 --- --- % Temperature Coefficient --- {0.01 {0.02 %/] Output Short Circuit 0.5 Second Max. General Specification Parameter Rated Isolation Voltage Isolation Resistance Isolation Capacitance Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC 500VDC 1000 --- --- M[ 100KHz,1V --- 60 100 pF 50 90 110 kHz Switching Frequency Input Fuse Selection Guide 5V Input Models 12V Input Models 24V Input Models 500mA Slow - Blow Type 200mA Slow - Blow Type 100mA Slow - Blow Type Typical Applications + +Vin Fuse DC Power Source - +Out Single Output DC / DC Converter -Vin Load -Out Connecting Pin Patterns (2.54 mm / 0.1 inch grids ) TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -3- TOTAL POWER INT'L MBU100 Derating Curve 5V Output Only Output Power % 100 100 80 80 60 60 40 40 -3.3% / OC 20 20 0 0 -25 -10 0 20 40 60 Ambient Temperature All Other Output Output Power % Output Power % 80 100 125 O C 100 100 80 80 60 60 40 40 -4.0% / OC 20 Output Power % 20 0 0 -25 -10 0 20 40 60 Ambient Temperature 80 100 125 O C NOTE: 1. Specifications typical at Ta=+25],resistive load,nominal input voltage,rated output current unless otherwise noted. 2. Other input and output voltage may be available,Please contact factory. 3. Specifications subject to change without notice. TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -4-