Cree® SMD LED Model # LM2-THR1-F1-N1 Data Sheet 60-degree, 3.2 x 2.7 mm, power SMD LED in red color with water-transparent lens Applications • • • • • • Traffic Lights Backlighting (such as LCDs, switches, keys, displays, illuminated advertising) Interior and Exterior Automotive Lighting (such as dashboards, backup and brake lights) Substitution for Micro Incandescent Lamps Marker Lights (such as steps and exits) Signal and Symbol Luminaires Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 70 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 225 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 300 °C/W RTHJS 150 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) D-CT186.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Forward Voltage VF IF = 50 mA V Reverse Current IR VR = 5 V μA Luminous Flux ΦV IF = 50 mA mlm Luminous Intensity IV IF = 50 mA mcd 1400 2200 Dominant Wavelength λD IF = 50 mA nm 620 628 2θ½ IF = 50 mA deg 50% Power Angle Minimum Subject to change without notice. www.cree.com/ledlamps Typical Maximum 2.5 3.2 10 2550 635 60 Standard Bins for LM2-THR1-F1-N1 (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM2-THR1-F1-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 50 mA. Y2 or above Luminous Intensity (IV) 3550 mcd Y1 2800 mcd X2 2240 mcd X1 1800 mcd W2 1400 mcd 620 nm 635 nm Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT186.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Document No. Rev. No. SPE/LM2-THR1-F1-N1 02 Graphs 100.0 -50 -60 If (mA) -40 -20 -30 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 Vf(V) 0.0 2.0 Ir(uA) 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -50.0 FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=23nm Domi WL= 628nm 2.5 I (RELATIVE LUMINOUS INTENSITY) 2.0 100% 1.5 75% 1.0 50% 0.5 25% If(mA) 0.0 0.0 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. 0% 400 FORWARD CURRENT. 500 600 WL(nm) 800 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 100 IF(mA) 50% Power Angle : Rth j-s=150 C/W 80 40 10 0 1.0 50 40 60 0.6 70 0.4 80 0.2 90 0 0 0.8 Rth j-a=300 C/W T ( C) 0 20 40 60 80 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Signatures Date Prepared by WangFJ 2007-03-16 Rev.No Checked by XieJH 2007-03-16 02 Approved by DavidLiu 2007-03-16 FCN# 20 60 20 Items 30 100 1.0 0.8 0.6 0.4 0 20 60 80 100 110 FIG.6 SPATIAL DISTRCBUTION. Revision History Date Change Description 2007-03-16 Cancel cover page Description:60 Degree FCN20070080 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Copyright © 2007 Cree, Inc. All rights reserved.Ltd. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 40 CLD-CT186.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. SPE/LM2-THR1-F1-N1 02 Mechanical Dimensions Dimension Drawing witches,Keys,Displays,Illuminated All dimensions are in mm. r Automotive Lighting(e.g. Dashboard e Lights) o Incandescent Lamps Steps,Exit Ways,Etc.) Luminaire tings at Ta = 25°C Symbol Absolute maximum Rating Unit IF 70 mA IFP 200 mA VR 5 V PD 225 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 300 °C /W Rth JS 150 °C /W 2 duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) pttical Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF =50mA --- 2.5 3.2 V IR VR = 5V --- --- 10 PA --- 2550 --- mlm Notes ĭVRoHS Compliance IF = 50mA IVThe levelsIFof=50mA 1400 2200 biologically --- toxic (PBT), mcd environmentally sensitive, persistent persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the permitted for in an exempted application, in accordance with EU DirecIlimits) 620such substances, 628 or are used635 nm Othreshold F =50mA D tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. IF = 50mA 2 T½ --- 60 --- deg Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT186.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM2-THR1-F1-N1-00001 Description SMD 60 High Red 628nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT186.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps