Cree® SMD LED Model # LM1-PBL1-01-N1 Data Sheet 120-degree, 3.2 x 2.7 mm, SMT LED in blue color with water-transparent lens Applications • • • • • Indicators Illuminations LCD Back Lights Automobile Applications RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 25 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 450 °C/W RTHJS 300 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) D-CT145.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Forward Voltage VF IF = 20 mA V Reverse Current IR VR = 5 V μA Luminous Intensity IV IF = 20 mA mcd 112 160 λD IF = 20 mA nm 460 470 2θ½ IF = 20 mA deg Dominant Wavelength 50% Power Angle Minimum Subject to change without notice. www.cree.com/ledlamps Typical Maximum 3.4 4.0 10 480 120 Standard Bins for LM1-PBL1-01-N1 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-PBL1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) X3 X4 X5 X6 T1 or above 280 mcd S2 224 mcd S1 180 mcd R2 140 mcd R1 112 mcd 460 nm 465 nm 470 nm 475 nm 480 nm Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT145.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-PBL1-01-N1 Rev. No. 03 GraphsGraphs 100.0 If (mA) -50 -40 -20 -30 -10 0 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 -40.0 20.0 Vf(V) 0.0 3.0 3.4 3.8 4.2 Ir(uA) 5.0 4.6 FIG.2 REVERSE CURRENT VS. FIG.1 FORWARD CURRENT VS. REVERSE VOLTAGE. FORWARD VOLTAGE. Half Power WL=28nm Domi WL= 470nm 5.0 100% 4.0 3.0 75% 2.0 50% 1.0 25% If(mA) 0.0 0.0 20.0 40.0 60.0 0% 300 80.0 100.0 400 500 600 WL(nm) 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. FIG.3 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. FORWARD CURRENT 50 -50.0 IF(mA) 50% Power Angle : Ie(%) 0 40 100% Rth j-s=300 C/W 80% 30 60% 20 10 0 40% Rth j-a=450 C/W 20% T ( C) 0 20 40 60 80 100 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items -60 -30 0 30 60 90 0% FIG.6 FAR FIELD PATTERN Signatures Date Prepared by Meiliping 2005-11-11 Rev.No Checked by XieJH 2005-11-11 02 2005-07-27 Release. Change IV Rank from R1~S1 (min) 112mcd to Q2~S1 2005-11-11 03 2005-11-11 Change IV Rank from Q2~S1(min)90mcd to R1~S2 (min) 112mcd. Approved by FCN# DavidLiu Revision History Date Change Description (min) 90mcd. FCN20050365 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT145.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-PBL1-01-N1 Rev. No. 03 Mechanical Dimensions Dimension Drawing All dimensions are in mm. lications isplays ings at Ta = 25°C Absolute maximum Symbol Rating Unit IF 25 mA IFP 100 mA VR 5 V PD 100 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 450 °C/W Rth JS 300 °C/W 2 duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) ical Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF = 20mA --- 3.4 4.0 V IR RoHS Compliance VR = 5V --- --- 10 PA Notes The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or in this product are below the maximum concentration values (also referred to as the IV otherwise IF =restricted 20mA materials mcd 112 160 --threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- OD 2 T½ tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. IF = 20mA 460 470 480 nm --- 120 --- deg Vision Advisory Claim IF = 20mA Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT145.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Description LM1-PBL1-01-N1-00001 SMD 120 Blue 470nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT145.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps