Cree® SMD LED Model # LM1-PRG1-01-N2 Data Sheet 120-degree, 3.2 x 2.8-mm, SMT LED in red and green colors with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Absolute Maximum Rating Symbol Unit R G IF 50 25 mA IFP 200 100 mA Reverse Voltage VR 5 5 V Power Dissipation PD 125 100 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Forward Current Note 1 Peak Forward Current Note 2 Junction/ambient RTHJA 450 400 °C/W Junction/solder point RTHJS 300 280 °C/W Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. RTH test condition: mounted on PC Board FR 4 (pad size ≥16mm2) D-CT172.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Condition Wavelength at peak emission IF = 20 mA Dominant Wavelength IF = 20 mA Spectral bandwidth at 50% IREL max IF = 20 mA Viewing Angle at 50% IV IF = 20 mA Forward Voltage IF = 20 mA Luminous Intensity IF = 20 mA Reverse Current (max) VR = 5 V Values Symbol Unit R G PEAK 624 527 nm DOM 620~628 520~540 nm 23 38 nm ∆ ½ 120 120 deg VF(avg) 2 2.0 3.4 V VF(max) 2.5 4.0 V IV(min) 112 280 mcd IV(avg) 180 450 mcd IR 10 10 Subject to change without notice. www.cree.com/ledlamps A Standard Bins for LM1-PRG1-01-N2 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( ) bins shown. D Orders for LM1-PRG1-01-N2 may be filled with any or all bins contained as below. Luminous Intensity (IV) All luminous intensity (IV) and dominant wavelength ( ) values shown and specified are at IF = 20 mA. D T1 or above 280 mcd S2 224 mcd S1 180 mcd R2 140 mcd R1 112 mcd 620 nm 628 nm Luminous Intensity (IV) Dominant Wavelength ( ) D V1 or above 710 mcd U2 560 mcd U1 450 mcd T2 355 mcd T1 280 mcd 520 nm Dominant Wavelength ( 540 nm ) D Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT172.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-PRG1-01-N2 Rev. No. 01 Graphs Graphs If (mA) 100.0 80.0 80.0 60.0 60.0 40.0 40.0 RED 20.0 Vf(V) FORWARD VOLTAGE. -40 -50 Vf(V) 0.0 3.0 3.4 3.8 4.2 5.0 4.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -20 -30 GREEN 20.0 0.0 1.8 2.0 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS. -60 If (mA) 100.0 -50 Vr(V) -10 -30 -40 -20 -10 0 0.0 0.0 Vr(V) -10.0 -10.0 -20.0 -20.0 GREEN RED -30.0 -30.0 -40.0 -40.0 -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power R: G: Domi 5.0 R: G: 3.0 RED WL= 624nm WL=527nm 75% 2.0 50% GREEN 1.0 0.0 20.0 40.0 60.0 80.0 100.0 0% 400 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT GREEN RED 25% If(mA) 0.0 500 600 WL(nm) 800 700 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. IF(mA) 50% Power Angle : 80 40 Ie(%) 0 Rth j-s=300 C/W 60 Rth j-a=450 C/W RED 100% 80% 60% Rth j-s=280C/W 20 0 WL= 23nm WL=38nm I (RELATIVE LUMINOUS INTENSITY) 100% 4.0 100 -50.0 Ir(uA) 40% GREEN Rth j-a=400C/W 0 20 40 60 T ( C) 80 20% 100 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Signatures Date Prepared by Maaiqiu 2006-12-05 Checked by XieJH 2006-12-05 -60 -30 0 30 FCN# CLD-CT172.000 FCN20060390 90 0% Revision History Rev.No Date Change Description Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the 2006-12-05 Approved Cree logo are by registered DavidLiu trademarks of Cree, Inc. 60 FIG.6 SPATIAL DISTRIBUTION. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions Document No. SPE/LM1-PRG1-01-N2 Rev. No. 01 Dimension Drawing All dimensions are in mm. cations ngs at Ta = 25к ymbol Absolute maximum Rating Unit R G IF 50 25 mA IFP 200 100 mA VR 5 5 V PD 125 100 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 450 400 °C/W Rth JS 300 280 °C/W duty <=1/10 2 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) cal Characteristics ( Ta = 25°C) Condition Symbol IF=20mA NotesIF=20mA n rel max IF=20mA RoHS Compliance Values Unit R G Opeak 624 527 nm Odom 620-628 520~540 nm 23 38 nm O 120 biologically toxic 120 (PBT), persistent Deg. IF=20mA The levels of environmentally sensitive, persistent organic pollutants (POP), or 2 T½ otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted Vfor such substances, in accordance with EU Direc2.0or are used in an 3.4exempted application, V F(avg) tive 2002/95/EC IF=20mA on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. 2.5 VF(max) 4.0 V Vision Advisory IF=20mA Claim Iv(Min) 112 280 mcd Iv(Avg) 180 450 mcd Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. VR=5V IR 10 10 PA Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT172.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-PRG1-01-N2-00001 Description SMD 120 High Red and Pure Green, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT172.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps