DC/DC Converters TEN 15WI Series, 15 Watt RoHS compliant Features ◆ Ultra-wide 4:1 Input Range ◆ High Efficiency up to 86% ◆ Extended Operating Temperature Range UL 60950-1 –40 to +85°C max. ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 1500VDC ◆ Built-inFilter meets EN 55022, Class A and FCC, Level A without external Components ◆ Remote On/Off ◆ Industry Standard Pinout ◆ Six-Side shielded Case ◆ Lead free Design, fully RoHS compliant ◆ 3 Year Product Warranty The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of -40°C to +85°C. Models Ordercode Input voltage range TEN 15-2410WI Output voltage Output current max. Efficiency typ. 3,3 VDC 3’000 mA 78 % 5,1 VDC 2‘950 mA 82 % 12 VDC 1’250 mA 85 % ± 12 VDC ± 625 mA 85 % TEN 15-2423WI ± 15 VDC ± 500 mA 86 % TEN 15-4810WI 3,3 VDC 3’000 mA 78 % 5,1 VDC 2‘950 mA 82 % 12 VDC 1’250 mA 85 % ± 12 VDC ± 625 mA 85 % ± 15 VDC ± 500 mA 86 % TEN 15-2411WI TEN 15-2412WI TEN 15-2422WI TEN 15-4811WI TEN 15-4812WI TEN 15-4822WI TEN 15-4823WI http://www.tracopower.com 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Page of 3 DC/DC Converters TEN 15WI15 Watt Input Specifications Input current at no load Input current at full load 24 Vin; 24 Vin; 48 Vin; 48 Vin; Surge voltage (100 msec. max.) 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. 3.3 Vout other output 3.3 Vout other output models: models: models: models: 528 mA typ. 740 mA typ. 264 mA typ. 370 mA typ. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ± 1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 10 – 100 % 1 % max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient ± 0.02 % / K Output current limitation > 110% of Iout max., foldback Short circuit protection indefinite (automatic recovery) Capacitive load single output models: 470 µF max. dual output models: 220 µF max. General Specifications Temperature ranges – Operating – 40 °C ... + 85 °C – Case temperature + 100 °C max. – Storage – 55 °C ... + 125 °C Derating 3.5%/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217E ground benign) > 700’000 h @ + 25 °C Isolation voltage (60 sec) – Input/Output 1‘500 VDC Isolation capacity – Input/Output 1200 pF typ Isolation resistance – Input/Output (500 VDC) > 1’000 MOhm Switching frequency (fixed) 330 kHz typ. (pulse width modulation) Remote On/Off: – On: 2.5 ... 5.5 VDC or open circuit. – Off: -0.7 ... 0.8 VDC or short circuit pin 2 and pin 6 – Off idle current: 10 mA max. Safety standards UL 60950-1, EN 60950-1, IEC 60950-1 Safety approvals CSA File No. 226037 http://directories.csa-international.org All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page of 3 DC/DC Converters TEN 15WI15 Watt Physical Specifications Case material copper, nickel plated Baseplate material non conductive FR4 Potting material Silicon TSE-3331A/B (flammability to UL 94V-0) Weight 32g (1.09oz) Soldering temperature max. 265 °C / 10 sec. Outline Dimensions 50.8 15.2 (0.80) (0.60) 10.2 20.32 25.4 (1.00) Pin-Out 6.0 5 (0.24) 6 (0.40) 4 (0.40) 1 2 10.16 10.16 3 Bottom View (0.40) 7.62 (0.30) (0.30) 7.62 2.5 (0.10) 5.08 (0.20) (2.0) Insulated baseplate Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout 4 No pin Common 5 –Vout –Vout 6 Remote On/Off Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitsch tolerances: ±0.25 (±0.01) Case tolerances: ±0.5 (±0.02) Specifications can be changed any time without notice Rev. 09/06 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page of 3