DC/DC Converters TEN 5WI Series, 6 Watt CB Scheme Features ◆ Ultra wide 4:1 input range ◆ DIP-24 Package with standard pinout ◆ Full SMD design ◆ Extended operating temperature range UL 60950-1 –40°C to +85°C max. ◆ High efficiency ◆ Excellent load and line regulation ◆ Indefinite short circuit protection ◆ I/O isolation 1500VDC ◆ Built-in Filter to meet EN 55022, Class A and FCC, level A ◆ Lead-free design, fully RoHS compliant ◆ 3-year product warranty The TEN 5WI series is a family of high performance dc-dc converter modules with 5 W output power, featuring ultra wide input voltage ranges of 9 - 36 VDC or 18 - 75 VDC. They come in a shielded DIP-24 metal package with industry-standard footprint. A high efficiency allows –40°C to +70°C operation ambient temperatures at full load. Typical applications for these converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where a wide input voltage range is required. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 5-2410WI 3.3 VDC 1200 mA 75 % TEN 5-2411WI 5 VDC 1000 mA 78 % 12 VDC 500 mA 83 % 15 VDC 400 mA 82 % ±5 VDC ±500 mA 78 % TEN 5-2422WI ±12 VDC ±250 mA 83 % TEN 5-2423WI ±15 VDC ±200 mA 82 % TEN 5-4810WI 3.3 VDC 1200 mA 75 % TEN 5-4811WI 5 VDC 1000 mA 78 % 12 VDC 500 mA 83 % 15 VDC 400 mA 82 % ±5 VDC ±500 mA 78 % TEN 5-4822WI ±12 VDC ±250 mA 83 % TEN 5-4823WI ±15 VDC ±200 mA 82 % TEN 5-2412WI TEN 5-2413WI TEN 5-2421WI TEN 5-4812WI TEN 5-4813WI TEN 5-4821WI http://www.tracopower.com 9 – 36 VDC (24 VDC nominal) 18 – 75 VDC (48 VDC nominal) Page 1 of 3 DC/DC Converters TEN 5WI Series 6 Watt Input Specifications Input current no load 24 Vin models 20 mA typ. 48 Vin models 10 mA typ. Start-up voltage / under voltage shut down 24 Vin models 9 VDC / 8.5 VDC typ. 48 Vin models 18 VDC / 16 VDC typ. Surge voltage (1 sec. max.) 24 Vin models 50 V max. 48 Vin models 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±2.0 % max. Regulation – Input variation Vin min. to Vin max. ±0.5 % max. – Load variation 10 – 100 % single output models 1.0 % max. dual output models 1.0 % max. balanced load 25 – 100 % 5.0 % max. unbalanced load Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max Temperature coefficient ±0.02 %/K Current limitation >110 % of Iout max., constant current Short circuit protection indefinite (automatic recovery) Capacitive load 3.3 / 5 VDC models 470 µF max. 12 / 15 VDC models 100 µF max. dual output models 100 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –40°C to +125°C Derating 3.5 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >800’000 h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 1000 pF typ Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm Switching frequency 450 kHz typ. (Pulse frequency modulation PFM) Safety standards cUL/UL 60950-1 , IEC/EN 60950-1 Safety approvals CSA File No. 226037 http://directories.csa-international.org Environmental compliance – Reach www.tracopower.com/products/ten5wi-reach.pdf – RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 5WI Series 6 Watt Physical Specifications Casing material black anodized aluminium Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 17 g (0.49 oz) Soldering temperature max. 260°C / 10 sec. 15.24 (0.6) 16 (0.2) 5.08 (0.9) 22.86 31.8 (1.25) 23 22 Bottom view (0.1) 2.54 4.5 (0.18) Outline Dimensions 9 11 14 Insulated Baseplate 2 3 2.4 15.24 (0.1) (0.6) 4.1 10.2 20.3 (0.16) (0.4) (0.8) Pin-Out Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No function –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (±0.02) Pin pitch tolerances ±0.35 (±0.014) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. March 5. 2015 Page 3 of 3