DC/DC Converters TEN 5 Series, 6 Watt CB Features ◆ Wide 2:1 input range ◆ Full SMD-design ◆ High efficiency up to 86% ◆ Extended operating temperature Scheme UL 60950-1 range –40°C to 85°C ◆ I/O isolation 1’500 VDC ◆ Indefinite short circuit protection ◆ Input filter to meet EN 55022, class A and FCC, level A without external components ◆ Shielded metal case with insulated baseplate ◆ 24-pin DIP with industry standard pinout ◆ High reliability, MTBF >1 Mio. h ◆ 3-year product warranty The TEN 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. I/O-isolation of 1’500 VDC together with conducted noise compliance to EN 55022-A and FCC level A makes these converters ideal for a wide range of applications in communications, mobile battery powered equipments and industrial systems. Models Ordercode TEN 5-0510 TEN 5-0511 TEN 5-0512 TEN 5-0513 TEN 5-0521 TEN 5-0522 TEN 5-0523 TEN 5-1210 TEN 5-1211 TEN 5-1212 TEN 5-1213 TEN 5-1221 TEN 5-1222 TEN 5-1223 TEN 5-2410 TEN 5-2411 TEN 5-2412 TEN 5-2413 TEN 5-2421 TEN 5-2422 TEN 5-2423 TEN 5-4810 TEN 5-4811 TEN 5-4812 TEN 5-4813 TEN 5-4821 TEN 5-4822 TEN 5-4823 http://www.tracopower.com Input voltage range 4.5 – 7 VDC (5 VDC nominal) 9 – 18 VDC (12 VDC nominal) 18 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output current max. 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA 1200 mA 1000 mA 500 mA 400 mA ±500 mA ±250 mA ±200 mA Efficiency typ. 75 % 79 % 82 % 82 % 79 % 82 % 82 % 77 % 81 % 84 % 84 % 81 % 84 % 84 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % 79 % 83 % 86 % 86 % 83 % 86 % 86 % Page 1 of 3 DC/DC Converters TEN 5 Series 6 Watt Input Specifications Input current no load 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 80 mA typ. 30 mA typ. 15 mA typ. 8 mA typ. Start-up voltage / 5 Vin models: 4.4 VDC / 4.0 VDC (or lower) under voltage shut down 12 Vin models: 8.0 VDC / 8.0 VDC (or lower) 24 Vin models: 16.0 VDC / 16.0 VDC (or lower) 48 Vin models: 32.0 VDC / 32.0 VDC (or lower) long term operation at undervoltage will demage the converter! Surge voltage (1 sec. max.) Reverse voltage protection 5 12 24 48 Vin Vin Vin Vin models: models: models: models: 10 V max. 25 V max. 50 V max. 100 V max. 1.0 A max. Conducted noise (input) EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy 1.0 % Regulation – Input variation Vin min. to Vin max. – Load variation 20 – 100 % single output models: dual output models balanced load: dual output models unbalanced load: 0.3 % max. 1.0 % max. 2.0 % max. 5.0 % max. (25 % / 100 %) Minimum load 5 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ., 75 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation >120 % of Iout max., foldback Short-circuit protection indefinite (automatic recovery) Start up time (nominal Vin and constant resistive load) 10 ms typ. (for power on and remote on) Capacitive load single output models: 6800 µF max. dual output models: 1000 µF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +90°C max. – Storage –50°C to +125°C Derating 3.3 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 380 pF typ. Isolation resistance – Input/Output >1‘000 M Ohm (500 VDC) Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Safety approval CSA File No. 226037 http://directories.csa-international.org Environmental compliance – Reach www.tracopower.com/products/ten5-reach.pdf – RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 5 Series 6 Watt Physical Specifications Casing material steel, metal Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 16.9 g (0.59 oz) Soldering temperature max. 260°C / 10 sec. 4.5 15.24 (0.6) 16 (0.2) 5.08 31.8 (1.25) 23 22 Bottom view (0.1) 2.54 (0.18) Outline Dimensions 14 Insulated Baseplate 2.54 15.22 (0.1) (0.6) 4.1 10.2 20.3 (0.16) (0.4) (0.8) 2 3 Pin-Out Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No con. –Vout 9 14 +Vout +Vout 11 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.25 (±0.01) Pin pitch tolerances ±0.13 (±0.005) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. January 06. 2015 Page 3 of 3