SENSITRON SHD850001

SENSITRON
SEMICONDUCTOR
SHD850001
TECHNICAL DATA
DATA SHEET 272, REV. A
6A-Peak Low Side MOSFET Driver
Bipolar/CMOS/DMOS Process
FEATURES:
• CMOS Construction
• Similar to Industry Part Number MIC4420
• Low Output Impedance, 2.5 Ohms
• Latch-Up Protected; Will Withstand > 500 mA Reverse Output Current
• Logic Input Withstands Negative Swing of Up to 5V
MAXIMUM RATINGS
RATING
Power Dissipation
Derating Factors (CerPack)
Storage Temperature
Lead Temperature (10sec)
Supply Voltage
Input Voltage, (VS + 0.3V to Ground)
Input Current (VIN >VS)
SYMBOL
ELECTRICAL CHARACTERISTICS
TYP.
-
MAX.
1,250
10
+150
300
20
-5.0
50
UNITS
mW
mW/°C
°C
°C
Volts
Volts
mA
T = 25°C with 4.5V ≤ VS ≤ 18V otherwise specified.
A
Logic 1 Input Voltage
Logic 0 Input Voltage
Input Voltage Range
Input Current, (0V ≤ VIN ≤ VS
High Output Voltage
VIH
VIL
VIN
IIN
VOH
Low Output Voltage
Output Resistance, Output Low, (IOUT = 10mA, Vs = 18V
Output Resistance, Output High, (IOUT = 10mA, Vs = 18V
Peak Output Current VS = 18V
Latch-Up Protection
Rise Time, (CL = 2500 pF)
Fall Time, (CL = 2500 pF)
Delay Time
Delay Time
Power Supply Current, (VIN = 3.0V)
(VIN = 0V)
Operating Input Voltage
VOL
RO
RO
IPK
IR
tR
tF
td1
td2
IS
ELECTRICAL CHARACTERISTICS
MIN.
-65
-
VS
2.4
-5.0
-10
VS
-0.025
>500
4.5
1.4
1.1
-
0.8
VS +0.3
10
-
Volts
Volts
Volts
µA
Volts
1.7
1.5
6.0
12
13
18
48
0.45
90
-
0.025
2.8
2.5
35
35
75
75
1.5
150
18
Volts
Ohms
Ohms
Amps
mA
ns
ns
ns
ns
mA
µA
Volts
T = -55°C to +125°C with 4.5V ≤ VS ≤ 18V otherwise specified.
A
Logic 1 Input Voltage
Logic 0 Input Voltage
Input Voltage Range
Input Current, (0V ≤ VIN ≤ VS
High Output Voltage
VIH
VIL
VIN
IIN
VOH
Low Output Voltage
VOL
2.4
-5.0
-10
VS
-0.025
-
-
0.8
VS +0.3
10
-
Volts
Volts
Volts
µA
Volts
-
0.025
Volts
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •
SHD850001
TECHNICAL DATA
DATA SHEET 272, REV. A
ELECTRICAL CHARACTERISTICS (Continued)
T = -55°C to +125°C with 4.5V ≤ VS ≤ 18V otherwise specified.
A
RATING
Output Resistance, Output Low, (IOUT = 10mA, Vs = 18V)
Output Resistance, Output High, (IOUT = 10mA, Vs = 18V)
Rise Time, (CL = 2500 pF)
Fall Time, (CL = 2500 pF)
Delay Time
Delay Time
Power Supply Current, (VIN = 3.0V)
(VIN = 0V)
Operating Input Voltage
SYMBOL
RO
RO
tR
tF
td1
td2
IS
VS
MIN.
4.5
TYP.
3.0
2.3
32
34
50
65
0.45
0.06
-
MAX.
5.0
5.0
60
60
100
100
3.0
0.4
18
UNITS
Ohms
Ohms
ns
ns
ns
ns
mA
mA
Volts
MECHANICAL DIMENSIONS: in Inches / mm
10
1
125±.010 [3.18±.25]
CerPack-10
PINOUT TABLE
DEVICE TYPE
MOSFET
CERPACK-10
Pin- 1
VS
Pin-2
Input
Pin-3
N/C
Pin-4
Gnd.
Pin-5
N/C
Pin-6
N/C
Pin-7
Gnd.
Pin-8
Output
Pin-9
Output
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •
Pin-10
VS
SHD850001
TECHNICAL DATA
DATA SHEET 272, REV. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
•221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798•
• World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected]