SENSITRON SEMICONDUCTOR SCP-4167 TECHNICAL DATA DATA SHEET 592, REV. - Three-Phase MOSFET/IGBT Bridge Driver Absolute Maximum Rating Absolute Maximum Rating indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance is specified under board mounted and still air conditions. PARAMETER SYMBOL MIN TYP MAX UNIT High Side Floating Supply Voltage VB1,2,3 -0.3 - 625 V High Side Floating Supply Voltage VS1,2,3 VB1,2,3 - 25 - VB1,2,3 + 0.3 V Supply Voltage VCC -0.3 - 25 V Logic Ground VSS - 0.3 - VCC + 0.3 V Logic Input Voltage (HIN, LIN, ITRIP FLT-CLR, SD) Op-Amp Input Voltage VIN VSS - 0.3 - VCC + 0.3 V VIN-Amp VSS - 0.3 - VCC + 0.3 V FAULT Output Voltage VFLT VSS - 0.3 - VCC + 0.3 V Thermal Resistance RthjA - 80 O C/W Junction Temperature Tj -55 - 150 O Lead Soldering Temperature, 10 sec TL - - 250 O C C Recommended Operating Conditions PARAMETER SYMBOL MIN TYP MAX UNIT High Side Floating Supply Voltage VB1,2,3 VS1,2,3 + 10 - VS1,2,3 + 20 V High Side Floating Supply Voltage VS1,2,3 -5 - 300 V Supply Voltage VCC 10 - 20 V Logic Ground VSS -5 - 5 V Logic Input Voltage (HIN, LIN, ITRIP FLT-CLR, SD) VIN VSS - VSS + 5 V Op-Amp Input Voltage VIN-Amp VSS - VSS + 5 V FAULT Output Voltage VFLT VSS - VCC V SCP-4167 • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] • 1 DATA SHEET 592, REV. - Dynamic Characteristics VCC=VBS1,2,3 = 15V, VS1,2,3 = VSS, CL = 1 nF PARAMETER TEST CONDITIONS Turn-On Propagation Delay SYMBOL MIN TYP MAX UNIT ton - 700 - nsec toff - 700 - nsec Turn-On Rise Time tr - 75 - nsec Turn-Off Fall Time tF - 35 - nsec tsd - 700 - nsec titrip - 700 - nsec tbl - 400 - nsec VIN = 0V, VITRIP = 0 & 5V tflt - 500 - nsec Input Filter Time (HIN, LIN, & SD) VIN = 0 & 5V tfil Deadtime, LS Turn-Off to HS Turn-on & HS Turn-Off to LS Turn-On VIN = 0 & 5V DT Turn-Off Propagation Delay SD to Output Propagation Delay ITRIP to Output Propagation Delay ITRIP Blanking Time ITRIP to FAULT Propagation Delay Shutdown Shutdown Shutdown VIN = 0 & 5V VS1,2,3 = 0 to 300V VIN, VITRIP = 0V, VSD = 0 & 5V VIN = 0V, VITRIP = 0 & 5V VITRIP = 1V 310 - nsec 200 - nsec Static Characteristics VCC=VBS1,2,3 = 15V, VS1,2,3 = VSS PARAMETER SYMBOL MIN TYP MAX UNIT Logic “0” Input Voltage (Output = LO) Logic “1” Input Voltage (Output = HI) Logic “0” Fault Clear Input Voltage VIH 2.2 - - V VIL - - 0.8 V VFCLR,IH 2.2 - - V Logic “1” Fault Clear Input Voltage VFCLR,IL - - 0.8 V SD Input Positive Going Threshold VSD,TH+ - 1.8 - V SD Input Negative Going Threshold ITRIP Input Positive Going Threshold ITRIP Input Negative Going Threshold Quiescent VCC Supply Current VSD,THVIT,TH+ - 1.5 0.485 - V V VIT,TH- - 0.400 - V IQCC - 4 - mA VCCIUV+ VBSIUV+ VCCIUVVBSIUVIO+ - 10.4 - V - 9.4 - V 200 250 - mA IO- 420 500 - mA Supply Under Voltage Positive Going Threshold Supply Under Voltage Negative Going Threshold Output High Short Circuit Pulsed Current Output Low Short Circuit Pulsed Current TEST CONDITIONS VIN = 0V, or 5V VOUT = 0V, VIN = 0V, tp < 10 sec VOUT = 0V, VIN = 0V, tp < 10 sec • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] • 2 SCP-4167 DATA SHEET 592, REV. - Schematic Diagram +V VCC 10µF HIN1,2,3 LIN1,2,3 FAULT ITRIP FLT-CLR SD CAO CACA+ VSS VB1,2,3 HO1,2,3 VS1,2,3 Output LO1,2,3 COM COM SEN-4167 Package Layout: • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web Site - www.sensitron.com • E-Mail Address - [email protected] • 3 SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •