SDR803 thru SDR818 SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 100 AMP 50 - 1200 VOLTS 60 nsec ULTRA FAST RECTIFIER Designer's Data Sheet FEATURES: • • • • • • • • Ultra Fast Recovery: 60 nsec maximum. PIV to 1200 Volts. Low Forward Voltage Drop. Low Leakage Current. Hermetically Sealed. Single Chip Construction. For High Efficiency Applications. TX, TXV, and Space Level Screening Available Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage @ 100µA SDR803 SDR804 SDR805 SDR806 SDR807 SDR808 SDR809 SDR810 SDR811 SDR812 SDR813 SDR814 SDR815 SDR816 SDR817 SDR818 Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TA = 25 oC) SDR803 - 806 Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25oC) SDR807 - 809 SDR810 - 814 SDR815 - 818 Operating and Storage Temperature Maximum Thermal Resistance Junction to Case NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DO-5 SYMBOL VALUE UNITS VRRM VRWM VR 50 100 150 200 250 300 350 400 500 600 700 800 900 1000 1100 1200 Volts Io 100 Amps IFSM 1000 800 700 600 Amps TOP & TSTG -55 TO +175 RΘJC 0.85 DATA SHEET #: RU0059F o C o C/W SDR803 thru SDR818 SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics SYMBOL MAXIMUM UNITS VF1 1.00 1.50 1.85 1.90 VDC VF2 1.10 1.60 1.95 2.00 VDC IR 100 10 µA mA Junction Capacitance (VR = 10 VDC, TA = 25oC, f = 1 MHz) CJ 700 pF Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) tRR 60 nsec Instantaneous Forward Voltage Drop (IF = 100ADC, TA = 25oC, 300 - 500µs Pulse) SDR803 - 806 SDR807 - 810 SDR811 - 814 SDR815 - 818 Instantaneous Forward Voltage Drop (IF = 100ADC, TA = -55oC, 300 - 500µs Pulse) SDR803 - 806 SDR807 - 810 SDR811 - 814 SDR815 - 818 TA = 25oC TA = 100oC Reverse Leakage Current (Rated VR , 300 µs minimum Pulse) CASE OUTLINE: DO-5 Dimensions prior to solder dipping TYPICAL OPERATING CURVES PERCENT OF MAXIMUM FORWARD CURRENT RATING (%) (TA = 25oC unless otherwise specified) 55oC 100 80 60 40 20 0 0 25 50 75 100 125 150 175 END TAB TEMPERATURE (oC) 200