Features General • Based on the ARM® SC100TM SecurCoreTM 32-bit RISC Processor • Two Instructions Sets • ARM High-performance 32-bit Instruction Set •Thumb® High-code-density 16-bit Instruction Set • Von Neumann Load/Store Architecture • Single 32-bit Data Bus for Instructions and Data • 3-stage Pipeline Architecture • Fetch, Decode and Execute Stages • 8-bit, 16-bit and 32-bit Data Types • On-chip Programmable System Clock up to 50 MHz • Very Low Power Consumption • Industry Leader in MIPS/Watt • Low-power Idle and Power-down Modes • Bond Pad Locations Conforming to ISO 7816-2 • ESD Protection to ± 6000V • Operating Ranges: 1.62V to 5.5V, GSM/3G Compliant, PC Industry Compatible, EMV 32-bit Secure Microcontrollers Memory • 128M Bytes of external Flash memory - Typically 100,000 Write/Erase Cycles • 512K Bytes of ROM Program Memory • 384K Bytes of EEPROM, Including 256 OTP Bytes – Typically More than 500,000 Write/Erase Cycles at a Temperature of 25°C – 10 Years Data Retention • EEPROM Erase Only Mode • Write EEPROM With or Without Autoerase • 24K Bytes of RAM (2K Bytes shared with AdvX crypto accelerator) • 32K Bytes of ROM dedicated to ATMEL’s crypto-library AT91SC512384-128M Summary Peripherals • ISO 7816 Controller - Up to 625 kbps at 5 MHz • Serial Peripheral Interface (SPI) Controller (up to 20MHz) • USB Interface (5 Endpoints) - USB V2.0 Full-speed (12Mbps), Suspend/Resume Modes Supported - 4 Configurable Endpoints in Addition to Endpoint EP0 - Dynamic Pull-up Attachment • USB_IC (Inter Chip) 0.8e Interface • Interface for External NAND Flash Memory • Single Wire Interface (Digital Interface to RF front-end chip) • Two 16-bit Timers • Random Number Generator (RNG) • 2-level, 15-vector Interrupt Controller • Checksum Accelerator • CRC 16 / 32 Engine • Hardware DES and Triple DES • 32-bit Cryptographic Accelerator for Public Key Operations • Advanced MPU • High-performance Hardware Java Card Accelerator Security • Dedicated Hardware for Protection Against SPA/DPA Attacks • Advanced Protection Against Physical Attack • Environmental Protection Systems • Voltage, Frequency, Light and Temperature Protection Systems Development Tools • Hardware Development Support on the ATV4-91SC Voyager Emulation Platform • Software Libraries and Application Notes 6553A-SPD-03May07 Note: This a summary and draft document. For more information, please contact your local Atmel sales office. Description The AT91SC512384-128M is a dual chip solution, binding the AT91SC512384RCT device to a NAND Flash memory. The AT91SC512384RCT is a Secure Microcontroller, low-power, high-performance, 32-bit RISC microcontroller with ROM program memory, internal EEPROM data memory, and cryptographic accelerator, based on the ARM SC100 advanced secure processor. This general-purpose 32-bit processor offers high performance, very low power consumption, and additional features to help combat fraud. The NAND Flash features are industry standard, High density, Low power, and lowest semiconductor cost-per-megabyte Flash solution. It provides 128M Bytes of Flash memory, organized in a 128M x 8 bits configuration. The AT91SC512384-128M is delivered in an Plug-In SIM package with necessary drivers to manage all its peripherals. Figure 1. AT91SC512384-128M Architecture Vcc Power Management VDD ISO 7816 SWP NAND Interface I/O Interface Flash Memory Array USB AT91SC512384RCT Architectural Overview 2 NAND Flash The AT91SC512384RCT secure microprocessor is attached to the NAND Flash device thru an interface providing: • Power supply to the Flash memory, whatever external Vcc delivered • Data transfer between the two devices and control on Flash memory AT91SC512384-128M 6553A-SPD-03May07 Atmel Corporation Atmel Operations 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 487-2600 Memory RF/Automotive 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 436-4314 Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany TEL (49) 71-31-67-0 FAX (49) 71-31-67-2340 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland TEL (41) 26-426-5555 FAX (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL (852) 2721-9778 FAX (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL (81) 3-3523-3551 FAX (81) 3-3523-7581 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 436-4314 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1(719) 576-3300 FAX 1(719) 540-1759 La Chantrerie BP 70602 44306 Nantes Cedex 3, France TEL (33) 2-40-18-18-18 FAX (33) 2-40-18-19-60 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF ASIC/ASSP/Secure Products Zone Industrielle 13106 Rousset Cedex, France TEL (33) 4-42-53-60-00 FAX (33) 4-42-53-60-01 Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France TEL (33) 4-76-58-30-00 FAX (33) 4-76-58-34-80 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1(719) 576-3300 FAX 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland TEL (44) 1355-803-000 FAX (44) 1355-242-743 Literature Requests www.atmel.com/literature Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © Atmel Corporation 2007. All rights reserved. Atmel® , logo and combinations thereof, Everywhere You Are® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. 6553A-SPD-03May07