Optoway PT-7330 ************************************************************************************************************************************************************ 3.3V / 1.25 Gbps InGaAs PIN-TIA Receiver PT-7330 Series InGaAs PIN-TIA WITH PIGTAIL ************************************************************************************************************************************************************ FEATURES InGaAs/InP PIN Photodiode with AGC transimpedance amplifier Differential ended output Single +3.3 V operation Speed up to 1.25 Gbps - 40 ~ +85 ºC operation temperature DESCRIPTION PT-7330 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for telecommunications, especially Gigabit Ethernet and Fiber Channel. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Min. Typ. Max. Unit Dectection Range 1100 1310 1650 nm G Differential Gain 8 10 V/mW BW Bandwidth AC coupled, Load=50 Ω -3 dB point 6 Psat Saturation Power λ=1300nm Sens Sensitivity Rout Output Resistance Test Conditions -12 BER=10 850 MHz -3 dBm @1.25 Gb/s - 50 -24 dBm 65 ohm 1250 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Min. Typ. Max. Unit Vcc Power Supply 3.15 3.3 3.45 V Icc Supply Current (no load) - 40 60 mA ABSOLUTE MAXIMUM RATING (Tc=25 ºC) Symbol Parameter Value Unit 4.5 V V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ****************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway PT-7330 ************************************************************************************************************************************************************ MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T − 7 3 □ □ 3 Code Fiber 0 SMF, 9/125 μm 1 MMF, 50/125 μm 2 MMF, 62.5/125 μm − □ □ □ Code PIN Assignment Blank B Type A Type B Code Flange V Vertical H Horizontal X No Flange Code S F T X SA FA TA Connector SC/PC FC/PC ST/PC No Connector SC/APC FC/APC ST/APC ****************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/9/2009 V2.0 Optoway PT-7330 ************************************************************************************************************************************************************ Revision History Version 1.0 2.0 Subject Initial datasheet Modify the mechanical dimension and PIN assignment Release Date 2002/2/18 2009/4/9 ****************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 4/9/2009 V2.0