Optoway PT-7330 ************************************************************************************************************************************************************ 3.3V / 1.25 Gbps InGaAs PIN-TIA Receiver PT-7330 Series InGaAs PIN-TIA WITH PIGTAIL ************************************************************************************************************************************************************ FEATURES ² InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ² Differential ended output ² Single +3.3 V operation ² Speed up to 1.25 Gbps ² - 40 ~ +85 ºC operation temperature DESCRIPTION PT-7330 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for telecommunications, especially Gigabit Ethernet and Fiber Channel. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Test Conditions Dectection Range G Differential Gain BW Bandwidth AC coupled, Load=50 Ω -3 dB point Saturation Power λ=1300nm Psat Sens Sensitivity Rout Output Resistance -12 BER=10 Min. Typ. Max. Unit 1100 1310 1650 nm 6 8 10 V/mW 850 MHz -3 dBm @1.25 Gb/s - 50 -24 dBm 65 ohm 1250 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (Tc=25°C) Symbol Parameter Min. Typ. Max. Unit Vcc Power Supply 3.15 3.3 3.45 V Icc Supply Current (no load) - 40 60 mA ABSOLUTE MAXIMUM RATING (Tc=25 ºC) Symbol Parameter Value Unit 4.5 V V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ****************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 2/18/2002 V1.0 Optoway PT-7330 ************************************************************************************************************************************************************ MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T − 7 3 □ 3 Code Fiber 0 SMF, 9/125 µm 1 MMF, 50/125 µm 2 MMF, 62.5/125 µm □ − □ □ □ Code PIN Assignment Blank B Type A Type B Code Flange V Vertical H Horizontal X No Flange Code S F T X SA FA TA Connector SC/PC FC/PC ST/PC No Connector SC/APC FC/APC ST/APC ****************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 2/18/2002 V1.0 Optoway PT-7530 ************************************************************************************************************************************************************ 3.3V / 1.25 Gbps InGaAs PIN-TIA Receiver PT-7530 Series InGaAs PIN-TIA WITH RECEPTACLE *********************************************************************************************************************************************************** FEATURES ² InGaAs/InP PIN Photodiode with AGC transimpedance amplifier ² Differential ended output ² Single +3.3V operation ² Speed up to 1.25 Gbps ² - 40 ~ +85 ºC operation temperature DESCRIPTION PT-7530 series are designed as optical signal receivers with AGC transimpedance amplifier. Their wide dynamic ranges, differential outputs are suited for telecommunications, especially Gigabit Ethernet and Fiber Channel. AC / ELECTRICAL AND OPTICAL CHARACTERISTICS (TC=25°C) Symbol Parameter Test Conditions Dectection Range Min. Typ. Max. Unit 1100 1310 1650 nm 6 8 10 V/mW G Differential Gain AC coupled, Load=50 Ω BW Bandwidth -3 dB point 850 Psat Saturation Power λ=1300nm -3 Sens Rout Sensitivity -12 BER=10 MHz - @1.25 Gb/s - Output Resistance 50 - dBm -24 dBm 65 ohm 1250 Operation Speed Mbps DC / ELECTRICAL CHARACTERISTICS (TC=25°C) Symbol Parameter Min. Typ. Max. Unit VCC Power Supply 3.15 3.3 3.45 V ICC Supply Current (no load) - - 40 Value Unit 4.5 V mA ABSOLUTE MAXIMUM RATING (TC=25 ºC) Symbol Parameter V Voltage Topr Operating Temperature -40~+85 ºC Tstg Storage Temperature -40~+85 ºC ***************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 5/18/2002 V1.0 Optoway PT-7530 ************************************************************************************************************************************************************ MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT M8*0.75 P. C. D P. C. D P. C. D P. C. D P. C. D P. C. D P. C. D P. C. D Thru Holes 2.2 dia. P. C. D P. C. D Note: Specifications subject to change without notice. ORDER INFORMATION Part No.: P T − 7 5 3 0 Code Blank B □ − □ □ PIN Assignment Type A Type B Code F FB T S SB Connector Type FC/PC FC/PC (Board Mount) ST/PC SC/PC SC/PC (Board Mount) ***************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax:886-3-5979737 e-mail: [email protected] http: // www.optoway.com.tw 5/18/2002 V1.0