OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package Features: • • • • 3,750 or 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photodarlington Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: • • UL Certification No: E58730 VDE No: 40026624,40026625 Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photodarlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation voltage of 3,750 or 5,000 Volts(RMS), these product meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. CTR = Photosensor − Current 20mA = *100 = 200 10mA LED − Current All DIP product is shipped in a shipping tube with “TU” identified on the end of the part number. Example: OPI4N35DTUE is a 6-Pin DIP shipped in a tube (TU). . Applications: • • High voltage isolation PCBoard power system isolation RoHS • • • Industrial equipment power isolation Medical equipment power isolation Office equipment OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 1 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package Package Outline Dimensions and Schematics: Top-View Pin # Part Number 1 2 OPIA4N35 A 3 4 5 6 K E C B OPIA5010 A K E C B OPIA3N33 A K E C B OPIA2210 A K E C B OPIA6010 A-K K-A E C B OPIA2110 A K E C Symbol Definition Symbol Definition Symbol Definition Symbol Definition A Anode B Base C Collector E Emitter Analog Output Devices Ordering Information Part Number Isolation Voltage Max. (Vrms) OPIA4N35D OPIA5010D OPIA3N33D OPIA2210D OPIA6010D OPIA2110D 5,000 5,000 5,000 5,000 5,000 5,000 Configuration Information LED Sensor Packaging CTR Min/Typ/Max Typ. Tr / Tf (µs) RL = 100 ohms 60 / - / 600 5/4 600 / - / 9,000 60 / 50 500 / 4,000 / 5 / 60 50 / - / 600 2/3 50 / - / 600 2/3 40 / - / 400 4/3 Configuration: Definition of Terms LED Identification—Sensor Identification A = Anode K = Cathode B = Base C = Collector Part Number Suffix: TU = Ship in Tubes Package Configuration 6 Pin DIP 6 Pin DIP 6 Pin DIP 6 Pin DIP 6 Pin DIP 6 Pin DIP A K—B C E A K—B C E (Dar) A K—B C E (Dar) A K—B C E A K, K A—B C E A K—C E E = Emitter Example: OPI4N35DTUE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 2 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature -55° C to +125° C Operating Temperature OPIA4N35, OPIA5010, OPIA3N33 OPIA2210, OPIA6010, OPIA2110 -30° C to +100° C -55° C to +125° C Isolation voltage (1 minute) 5,000 Vrms Total Package Power Dissipation 200 mW Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron) 260° C Input Diode Continuous Forward Current 50 mA Peak Forward current (1 µs pulse width, 300 pps) 1A Reverse Voltage 6V Power Dissipation 70 mW Output Phototransistor Collector-Emitter Voltage OPIA4N35, OPIA6010, OPIA2110 OPIA2210 OPIA5010 OPIA3N33 Emitter-Collector Voltage OPIA4N35, OPIA2110 OPIA2210, OPIA6010 OPIA5010, OPIA3N33 Collector Current OPIA4N35, OPIA2210, OPIA6010, OPIA2110 OPIA5010, OPIA3N33 Power Dissipation OPIA4N35, OPIA2110 OPIA5010, OPIA3N33, OPIA2210, OPIA6010 60 V 350 V 300 V 30 V 6V 7V 50 mA 150 mA 150 mW 200 mW OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 3 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package Electrical Characteristics (OPIA6 _ _ Series) PARAMETER SYMBOL MIN TYP MAX - 1.2 1.4 UNITS TEST CONDITIONS Input Diode VF Forward Voltage OPIA4N35, OPIA5010, OPIA3N33, OPI604, OPIA2110 OPIA2210 VFM Peek Forward Voltage OPIA4N35, OPIA5010, OPIA3N33, OPI604 OPIA2210, OPIA2110 IR Reverse Current OPIA4N35, OPIA5010, OPIA3N33, OPI604, OPIA2110 OPIA2210 Ct Terminal Capacitance OPIA4N35, OPIA5010, OPIA3N33, OPI604, OPIA2110 OPIA2210 IF = 20 mA V 1.0 1.2 1.3 - - 3.5 3.0 - - 10 IF = 10 mA V IFM = 500 mA VR = 4 V µA - - 10 - 30 - VR = 5 V V = 0.0 V, f = 1K Hz pf - 30 - V = 0.0 V, f = 1M Hz Output Phototransistor—OPI4N35D, OPIA2210D, OPIA6010D, OPIA2210D ICEO Collector dark Current OPIA4N35, OPIA6010, OPIA2110 OPIA2210 - 10 100 200 nA IF = 0 mA, VCE = 20 V IF = 0 mA, VCE = 300 V VCEO Collector-emitter Saturation Voltage OPIA4N35, OPIA6010, OPIA2110 OPIA2210 - 0.1 - 0.3 0.4 V IF = 20 mA, IC = 1 mA IF = 8 mA, IC = 2.4 mA fC Cutt-Off frequency - 80 - K Hz VCC = 5 V, IC = 2 mA, RL = 100 Ω tR Rise Time OPIA4N35, OPIA6010 OPIA2210 OPIA2110 - 5 2 4 20 20 µs VCC = 5 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω tF Fall Time OPIA4N35, OPIA6010 OPIA2210 OPIA2110 - 4 3 3 20 20 µs VCC = 5 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω Continued on Next Page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 4 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package Electrical Characteristics (OPIA6 _ _ Series) - Continued from Previous Page PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Output PhotoDarlington—OPIA5010D, OPIA3N33D ICEO Collector dark Current OPIA5010 OPIA3N33 - - 1.0 0.1 µA IF = 0 mA, VCE = 200 V IF = 0 mA, VCE = 10 V VCEO Collector-emitter Saturation Voltage OPIA5010 OPIA3N33 - - 1.5 1.0 V IF = 20 mA, IC = 5 mA IF = 8 mA, IC = 2 mA fC Cutt-Off frequency OPIA5010, OPIA3N33 - 7.0 - K Hz tR Rise Time OPIA5010 OPIA3N33 - 60 5 300 40 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 10 V, IC = 50 mA, RL = 100 Ω tF Fall Time OPIA5010 OPIA3N33 - 50 60 250 100 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 10 V, IC = 50 mA, RL = 100 Ω % IF = 2 mA, VCE = 5.0 V IF = 2 mA, VCE = 5.0 V IF = 10 mA, VCE = 10.0 V IF = 5 mA, VCE = 5.0 V IF = 1 mA, VCE = 5.0 V IF = 10 mA, VCE = 5.0 V 1.0 pF V = 0.0 V, f = 1M Hz - ohm VCC = 5 V, IC = 2 mA, RL = 100 Ω Coupled Characteristics—OPIA6XXX Series CTR Current Transfer Ratio OPIA4N35 OPIA5010 OPIA3N33 OPIA2210 OPIA6010 OPIA2110 60 600 500 50 60 40 Cf Floating Capacitance - RISO Isolation resistance 5X10 600 9,000 4,000 600 600 400 0.6 10 11 10 DC500V OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 5 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPI4N35 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 6 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPI4N35 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 7 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA5010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 8 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA5010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 9 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA3N33 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 10 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA3N33 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 11 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA2210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 12 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA2210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 13 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA6010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 14 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA6010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 15 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA2210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 16 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package OPIA2210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 17 of 19 OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package Quality / Reliability Requirements Failure Criteria Conditions ± 10% 11 samples after 500Hrs 0 Fail @ VCE = 5.0VDC, Ta = 70°C ± 10% 50 samples after 96Hrs 0 Fail @ Max PD, Ta = 25°C MTTF @ 90% confidence 150,000 Min. @ 25°C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Lead Solderability 0 Fail per Method 208 of MIL-STD-202. 125°C Min. DSC test method Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage ± 20% 85°C, 500Hrs Autoclave 0 Fail TA = 121°C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs Parameter HTRB D IC(OFF) HTFB D IC(ON) Glass Transition of body Note: This is to be performed when a change occurs to form, fit or function. Government and Industry Standard Compliance Requirements European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Label Identification Carrollton, TX, USA MADE IN TAIWAN DESCRIPTION: Size: 3” (7.4 cm) X 2.2” (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. – or use equivalent label format. OPTEK P/N __OPI4N35D-TU__ IIIIIIIIIIIIIIIIIIIII QTY. ________N/A_________ IIIIIIIIIIIIIIIIIIIII DATE CODE _____(YYWW)___ IIIIIIIIIIIIIIIIIIIII LOT I.D. ____(Y-NNNNDDD)__ IIIIIIIIIIIIIIIIIIIII OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 9/09 Page 18 of 19 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA4N35, OPIA5010, OPIA4N33 OPIA2110, OPIA2210, OPI6010 DIP Package Packaging Information: Tube Optek's Optocoupler Part Numbers Packaging Quantities 4-PIN OPIA400D/A, OPIA410D/A P/H OPIA413D/A and 6-PIN SMD OPIA6XXD/A Series 8-PIN OPIA8XXD Series and OPID804D Inner 52 x 7 x 7.5 cm Qty Small Carton Medium Carton Large Carton 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm Weight Qty Weight Qty Weight Gross Weight Qty Weight Gross Weight Qty Gross Weight Weig ht 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0 170 -- 10,200 -- M/F 4-PIN and 5-PIN OPIA401B - OPIA404B, OPIA414B, OPIA500B SOP 4-PIN SSOP OPIA405C - OPIA409C P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package) SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD) M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil LeadSpacing) SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing) Tube Packaging Specifications (TU): Quantity: 6-pin: 65pcs/tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.4 9/09 Page 19 of 19