05001 DA05N thru DA24CP STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ Low Frequency I/O Ports ✔ RS-232 & RS-423 Data Lines ✔ Power Bus Lines ✔ Monitoring & Industrial Signal and Data Ports ✔ Microprocessor Based Equipment IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2 (Line-Ground) & Level 3 (Line-Line) 16 PIN DIP FEATURES ✔ 800 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Unidirectional & Bidirectional Configuration ✔ ESD Protection > 40 kilovolts ✔ Available in 5V, 12V, 15V & 24V ✔ Standard Dual-In-Line Package ✔ Protects 8 to 12 Lines ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded 16 Pin Dual-In-Line (DIP) Package Weight 1.2 grams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ Packaging: 50 Pieces Per Tube ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATIONS BIDIRECTIONAL UNIDIRECTIONAL DAxxN Series DAxxCN Series 16 15 14 13 12 11 10 9 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 DAxxCP Series DAxxP Series 05001.R9 2/07 1 www.protekdevices.com DA05N thru DA24CP DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 SYMBOL VALUE UNITS PPP 800 Watts °C TL -55 to 150 Storage Temperature TSTG -55 to 150 °C Forward Surge Rating IF 10 Amps Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) DA05N DA12N DA15N DA24N DA05P DA12P DA15P DA24P DA05CN DA12CN DA15CN DA24CN DA05CP DA12CP DA15CP DA24CP @ 25°C Unless Otherwise Specified RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 10A VC VOLTS @8/20µs VC @ IPP 5.0 12.0 15.0 24.0 5.0 12.0 15.0 24.0 5.0 12.0 15.0 24.0 5.0 12.0 15.0 24.0 6.0 13.3 16.7 26.7 6.0 13.3 16.7 26.7 6.0 13.3 16.7 26.7 6.0 13.3 16.7 26.7 12.5 26.0 33.0 52.1 12.5 26.0 33.0 52.1 12.5 26.0 33.0 52.1 12.5 26.0 33.0 52.1 24.6V 32.9V 37.7V 53.0V 24.6V 32.9V 37.7V 53.0V 24.6V 32.9V 37.7V 53.0V 24.6V 32.9V 37.7V 53.0V @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ 45A 34A 27A 20A 45A 34A 27A 20A 45A 34A 27A 20A 45A 34A 27A 20A MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE @VWM ID µA 0V @ 1 MHz C pF 200 2 2 2 200 2 2 2 200 2 2 2 200 2 2 2 880 440 400 275 880 440 400 275 500 385 300 200 500 385 300 200 Note 1: The “C” suffix specifies a bidirectional device, such as DA05CN or DA12CP. 05001.R9 2/07 2 www.protekdevices.com DA05N thru DA24CP GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 800W 8/20µs Waveform 1,000 100 10 0.1 10 100 td - Pulse Duration - µs 10,000 FIGURE 3 POWER DERATING CURVE 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 60 40 20 Average Power 0 0 0 05001.R9 2/07 1,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1 5 10 15 t - Time - µs 20 25 0 30 3 25 50 75 100 125 TL - Lead Temperature - °C 150 www.protekdevices.com DA05N thru DA24CP 16 PIN DIP PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE 16 PIN DIP A DIMENSIONS Orientation Dot (Pin #1) DIM B I 12 Places C FF J 12 Places G D 16 Places H L K 16 Places E MILLIMETERS MIN MAX 7.37 6.10 0.25 0° 0.51 3.17 0.84 TYP 0.38 2.54 TYP A B C D E F G H I J K L INCHES MIN MAX 0.780 19.8 0.290 0.310 7.87 0.240 0.260 6.60 0.010 0.020 0.50 0° 10° 10° 0.020 0.200 5.08 0.125 0.070 1.78 0.84 TYP 0.033 TYP 0.033 TYP 0.015 0.021 0.53 2.54 TYP 0.100 TYP 0.100 TYP NOTES: 1. Dimensions are exclusive of mold flash and metal burrs. BULK ORDERING NOMENCLATURE: 1. No Suffix = Product Shipped in Tubes of 25 pcs per Tube. 2. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., DA24CP-LF. Outline & Dimensions: Rev 1 - 11/01, 06003 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05001.R9 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com