05071 PLC01-6 LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ T1/E1 Line Cards ✔ ISDN Telecom Equipment ✔ xDSL, USB, SCSI & Ethernet Interfaces ✔ Cellular Base Stations ✔ Data & Bus Lines for FCC Part 68 Applications IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 48A, 8/20µs, L3(Line-Gnd), L4(Line-Line) & L1(Power) SO-16WB F E AT U R E S ✔ ESD Protection > 40 kilovolts ✔ 1,500 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ Low Clamping Voltage ✔ 100A (10/1000µs) per Bellcore 1089(Intra-Building) ✔ 200A (10/160µs) per FCC Part 68 ✔ Bidirectional Configuration ✔ Protects 1 Line ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16 (Wide Body) Package ✔ Weight 0.5 grams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 16mm Tape and Reel per EIA Standard 481 ✔ Packaging: 25 Pieces Per Tube ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05071.R6 2/07 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1 www.protekdevices.com PLC01-6 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Peak Pulse Power (td = 10/1000µs) - See Figure 1 PPP 1,500 Watts PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) PLC01-6 @ 25°C Unless Otherwise Specified RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Note 2) MAXIMUM CLAMPING VOLTAGE (See Note 3) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 100A VC VOLTS @ IP = 200A VC VOLTS @VWM ID µA @0V, 1 MHz C pF 6.0 8.0 15.0 16.0 25 50 Note 1: Electrical characteristics apply from pins 13-16 to 1-4 and 5-8 to 9-12; see circuit diagram. Note 2: VC tested at 10/1000µs impulse waveform. Note 3: 10/160µs impulse waveform per FCC Part 68. 05071.R6 2/07 2 www.protekdevices.com PLC01-6 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - kW 100 10 1.5kW 10/1000µs Waveform 1 0.1 0.1 1 10 100 1,000 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 100,000 FIGURE 3 POWER DERATING CURVE tf Peak Value IPP 100 Peak Pulse Power 10/160µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 100 TEST WAVEFORM PARAMETERS tf = 10µs td = 160µs td = t I /2 PP 50 e-t 60 40 20 Average Power 0 0 0 0 05071.R6 2/07 150 t - Time - µs 300 3 25 50 75 100 125 TL - Lead Temperature - °C 150 www.protekdevices.com PLC01-6 SO-16WB PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16WB -A- 9 16 PACKAGE DIMENSIONS -B- P 1 0.010” (0.25 MM) M B M 8 PL 8 DIM G A B C D F G J K P R R X 45º C 0º - 7º -TK 16 PL M F D J MILLIMETERS MIN MAX 10.15 7.40 2.35 0.35 0.50 1.27 BSC 0.25 0.10 10.05 0.25 INCHES MIN MAX 10.45 0.400 0.411 0.292 0.299 7.60 2.65 0.093 0.104 0.49 0.014 0.019 0.035 0.90 0.020 1.27 BSC 0.05 BSC 0.05 BSC 0.32 0.010 0.012 0.004 0.009 0.25 10.55 0.395 0.415 0.029 0.75 0.010 NOTES 0.010” (0.25 MM) M T B S A S MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 1. 2. 3. 4. 5. 6. - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.325” ± 0.005” 1. 2. 3. 4. 0.420” MIN Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T13 = 13 Inch Reel - 1,000 pieces per 16mm tape, i.e. PLC01-6-T13. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e. PLC01-6-LF-T13. No Suffix = Product Shipped in Tubes of 37 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06008 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05071.R6 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com