PHASE LOCK LOOP FM STEREO a monolithic device use in solid-state Requires Low stereo Only using 12L and ION Implant technology for receivers, No Inductors External Excellent DEMODULATOR I Part Count Channel Single Separation Potentiometer Without Adjustment Oscillator Frequency Adjustment Necessary 50 mA !,. Lamp Automatic, or LED Driving Transient-Free Capability Stereo /Morlo With Current Limiting Swltchnq . ~~ >,,$ ~’ . “%:t~ P SUFFIX PLASTIC CASE .&,i~~g@~ .>*&\.:,,, 1 – TYPICAL APPLICATION ,, This IS advance information and specifications are subject to change wtthout notice. AND TEST CIRCUIT PACKAGE 646 MAXIMUM RATINGS (TA = +25° unless otherwise noted. ) Rating Value Unit 16 volts Power Supply Voltage Lamp Current 50 mA 150 Oc -20 to +75 ‘c Junction Temperature Operating Temperature Storage Temperature ELECTRICAL signal with Range (Ambient) Range -65 CHARACTERISTICS Unless otherwise L or R channel onlv modulated noted; at 1.0 kHz and with VCC = +9 Vdc, TA = +25°C, 10Y. pilot to +150 1.7 V(p-p) level for stereo tests: 1,7 VIP-P) tests; using circuit in Figure 1. *THD and Channel Separation are measur~@.~~$[~$Band&ss ,~:: ‘“ . Filter (200 Hz-10 OUTLINE kHz), unless otherwise PARALLEL ( J- 41 MA k MOTOROLA @ multiplex composite specified DIM r A B c D F G H 7 = standard 1 kHz input signal for monaural .;,. A)t,, I DIMENSIONS NOTES: 1. LEADS WITHIN 0.13mm (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONOITION. 2. OIMENSION “L” TO CENTER OF LEAOS WHEN FORMED —L ‘c PLASTIC PACKAGE CASE 646 ReJ~ = 100°C J K L M N P ~ Q INCHES MAX MIN MI LLIMETERSI MIN ] MAX 18.16 18.80 6.60 6.10 4.06 4.57 0.51 0.38 1.52 1.02 2.54 8SC 1.83 1.32 0.20 0.30 2.92 3.43 7.37 7.87 100 – 1,02 0.51 0.13 0.38 0.51 0.76 0.715 0.240 0.160 0.015 0.040 0.100 0.052 0.008 0.115 0.290 _ 0.740 0.260 0.180 0.020 0.060 8SC 0.072 0.012 0.135 0.310 100 0.020 0.005 0.020 0.040 0.015 0.030 Semiconductor Products Inc. 782- G7813.5 Pr#nled In Sw,lzerland -