SDR620J, M & Z Thru SDR622J, M & Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SDR620 __ __ __ __ │ │ │ │ │ │ │ │ │ │ │ │ │ └ │ │ │ │ │ │ │ │ │ │ │ └ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ │ │ └ Leg Bend Option __ = Straight (See Figure 1) DB = Down Bend │ UB = Up Bend │ Package J = TO-257 └ M = TO-254 Z = TO-254Z Pin Configuration __ = Normal (See Table 1) R = Reverse Family/Voltage SDR620 = 100V 20A, 35nsec, 100-200 V Hyper Fast Rectifier Features: • • • • • • • • • Hyper Fast Recovery: 35nsec Maximum 3/ Low Reverse Leakage Current Low Junction Capacitance Hermetically Sealed Isolated Package Higher Voltages Available Available in Centertap Versions Replaces 1N5816 and 1N5816R TX, TXV, and S-Level Screening Available 2/ SDR621 = 150V SDR622 = 200V Maximum Ratings 4/ SDR620J, M & Z SDR621J, M & Z SDR622J, M & Z Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg) Operating & Storage Temperature J (TO-257) M (TO-254) Z (TO-254Z) Maximum Total Thermal Resistance Junction to Case Symbol Value Units VRRM VRWM VR 100 150 200 Volts Io 20 Amps IFSM 300 Amps TOP & TSTG -65 to +200 ºC RθJC 2.1 1.2 1.2 ºC/W Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C. TO-257 (J) TO-254 (M) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. TO-254Z (Z) DATA SHEET #: RC0031C DOC SDR620J, M & Z Thru SDR622J, M & Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics (per leg) 4/ Symbol Max VF1 VF2 VF3 VF4 IR1 IR2 1.00 1.20 0.90 1.15 10 100 Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA) tRR 35 nsec Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) CJ 250 pF Instantaneous Forward Voltage Drop Reverse Leakage Current (Rated VR , 300µsec Pulse Minimum) 300µsec Pulse, IF = 10A, TA = 25 ºC 300µsec Pulse, IF = 20A, TA = 25 ºC 300µsec Pulse, IF = 10A, TA = 100 ºC 300µsec Pulse, IF = 10A, TA = -55 ºC TA = 25 ºC TA = 100 ºC Units VDC µA µA Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C. Table 1- PIN ASSIGNMENT Figure 1- Optional Lead Bends Pin 1 Pin 2 Pin 3 __ Configuration Normal Cathode Anode Anode R Reverse Cathode Cathode Anode Code Suffix JDB, MDB & ZDB Suffix JUB, MUB & ZUB TO-257 (Suffix J) Outline: NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. TO-254 (Suffix M) Outline: TO-254Z (Suffix Z) Outline: DATA SHEET #: RC0031C DOC