SDR1183 Thru Solid State Devices, Inc. SDR1190 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 35 Amp 50-600 Volt 5 μsec STANDARD RECOVERY RECTIFIER Part Number/Ordering Information 1/ SDR11 __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ │ │ └ Pin Configuration __ = Normal (Cathode to Stud) │ (See Table 1) R = Reverse (Anode to Stud) │ └ Family/Voltage 83 = 50V 84 = 100V 85 = 150V 86 = 200V 87 = 300V 88 = 400V 89 = 500V 90 = 600V Features: • • • • • • • • • • Low Reverse Leakage Current Single Chip Construction PIV to 600V Hermetically Sealed Low Thermal Resistance Higher Voltage Devices Up to 1400V Available* Fast and Ultra Fast Recovery Versions Available* For Reverse Polarity Add Suffix “R” Replacement for 1N1183, 1N1184, 1N1185, 1N1186, 1N1187, 1N1188, 1N1189, and 1N1190 TX, TXV, and S-Level Screening Available 2/ *Contact Factory Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case SDR1183 SDR1184 SDR1185 SDR1186 SDR1187 SDR1188 SDR1189 SDR1190 Symbol Value Units VRRM VRWM VR 50 100 150 200 300 400 500 600 Volts Io 35 Amps IFSM 500 Amps TOP & TSTG -65 to +150 ºC RθJC 1.0 ºC/W DO-5: Notes: 1/ For ordering information, price, operating curves, and availability- contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: R00005B DOC SDR1183 Thru Solid State Devices, Inc. SDR1190 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Symbol Max Units Instantaneous Forward Voltage Drop (IF = 35 Adc, TA = 25 ºC, 300μs pulse) VF 1.4 VDC Instantaneous Forward Voltage Drop (IF = 35 Adc, TA = -55 ºC, 300μs pulse) VF 1.6 VDC Reverse Leakage Current (Rated VR, TA = 25 ºC, 300μs pulse minimum) IR 20 μA Reverse Leakage Current (Rated VR, TA = 100 ºC, 300μs pulse minimum) IR 2 mA Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA, TA = 25 ºC) tRR 5 μsec Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) CJ 250 pF Table 1- PIN ASSIGNMENT Code Configuration Terminal Stud __ Normal Anode Cathode R Reverse Cathode Anode DO-5 Outline (Normal Pin Configuration Shown): NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: R00005B DOC