SDR12 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 12 AMPS 200 - 1000 VOLTS 5 μsec STANDARD RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SDR12 ___ ___ ___ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV │ │ S = S Level │ │ │ └ Package Type ___ = Axial │ SMS = Surface Mount Square Tab │ └ Family/Voltage D = 200 V G = 400V J = 600 V K = 800 V M = 1000 V FEATURES: • • • • • • • • Standard Recovery: 5 μsec maximum PIV up to 800 Volts High Current Operation up to 12 A Hermetically Sealed Single Chip Construction Low Thermal Resistance TX, TXV, and Space Level Screening Available2/ Fast and Ultrafast Recovery Versions Available. Contact Factory. MAXIMUM RATINGS Symbol Value Units VRRM VRWM VR 200 400 600 800 1000 Volts IO 12 Amps IFSM 150 Amps Operating and Storage Temperature TOP & Tstg -65 to +175 Maximum Thermal Resistance Junction to Lead, L = 0.125” (Axial Lead) Junction to End Tab (Surface Mount ) RθJL RθJE 6 4 SDR12D SDR12G SDR12J SDR12K SDR12M Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA ≤ 55oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, allow junction to reach equilibrium between pulses, TA = 25oC) 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial DATA SHEET #: RC0091B o C o C/W Surface Mount Square Tab (SMS) DOC SDR12 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol Min Max Unit Instantaneous Forward Voltage Drop (IF = 12 Amps, TA = 25oC, 300μsec Pulse) TA = 25oC TA = -55oC VF1 VF2 –– –– 1.30 1.50 Reverse Leakage Current (At Rated VR, 300μsec pulse minimum) TA = 25oC TA = 100oC IR1 IR2 –-–– 5.0 200 μA μA CJ –– 80 pF trr –– 5 μs Junction Capacitance (VR = 10 VDC, TA = 25oC, f = 1 MHz) Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) Case Outline: (Axial) Case Outline: (SMS) Volts Volts DIM MIN MAX A B C D –– 0.140” 0.057” 0.500” 0.190” 0.180” 0.063” –– DIM MIN MAX A B C D 0.195” 0.190” 0.020” 0.002” 0.210” 0.230” 0.030” –– Note: Dimensions prior to soldering. NOTES: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0091B DOC