SDR9P thru SDR9T Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 9.0 AMP STANDARD RECOVERY RECTIFIER 1/ SDR9 __ __ __ __ │ │ │ └ Screening 2/ │ │ │ __ = Not Screened │ │ │ TX = TX Level │ │ │ TXV = TXV Level │ │ │ S = S Level │ │ │ │ │ └ Package Type __ = Axial Leaded │ │ SMS = Surface Mount Square Tab │ │ │ │ │ └ Recovery Time │ __ = Standard Recovery │ └ Voltage/Family P = 1300V R = 1400V T = 1500V 1300 ─ 1500 VOLTS • • • • • • • • • FEATURES: PIV to 1500 Volts Hermetically Sealed Low Reverse Leakage Current Single Chip Construction Replaces Larger DO-4 Rectifiers Low Thermal Resistance Available in Axial & Square Tab Versions 2/ TX, TXV, and S-Level Screening Available Fast,and Ultra Fast Versions AvailableContact Factory MAXIMUM RATINGS 3/ RATING SDR9P SDR9R SDR9T Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TA = 25°C ) Peak Surge Current (8.3 ms pulse, half sine wave, superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance Junction to Lead for Axial, L =.125" Junction to End Tab for Surface Mount NOTES: SYMBOL VALUE UNIT VRRM VRWM VR 1300 1400 1500 Volts IO 9.0 Amps IFSM 130 Amps -65 to +175 °C 8 4 °C/W TJ and TSTG RθJL RθJE Axial Leaded SMS 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0136A DOC SDR9P thru SDR9T Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS3/ CHARACTERISTICS Instantaneous Forward Voltage Drop (pulsed) Reverse Leakage Current (VR = 80% rated) SYMBOL MAXIMUM UNIT IF = 9.0 Adc, TA = +25°C IF = 6.0 Adc, TA = +25°C IF = 9.0 Adc, TA = -55°C VF1 VF2 VF3 1.20 1.10 1.40 Vdc TA = +25°C TA =+100°C IR1 IR2 1.0 50 μA BVR 1300 1400 1500 V (min) CJ 50 pF trr 5 μs SDR9P SDR9R SDR9T Minimum Breakdown Voltage (IR = 50 uA) Junction Capacitance (VR = 10 Vdc, f = 1MHz, TA = 25°C) Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C) Package Outlines: DIMENSIONS (inches) DIM. A B C D Minimum --.210 .037 1.000 Maximum .170 .250 .043 --- AXIAL NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIMENSIONS (inches) DIM. A (SMS) B C D Minimum .170 .260 .020 .002 Maximum .180 .300 .030 --- SMS DATA SHEET #: RC0136A DOC