Unity Opto Technology Co., Ltd. MVL-721G MVL-721Y MVL-721HR 04/30/2002 Description Package Dimensions Unite: mm ( inches ) The MVL-721xx series package is 2X5 rectangular led lamps standard color diffused plastic lens. The Hi-EFF red (HR) and yellow LED chips are made with Gallium Arsenide Phosphide on Gallium Phosphide diode. The green LED chip is made with Gallium Phosphide on Gallium Phosphide diode. The red (DR) chip is made with Aluminum Gallium Arsenide on Gallium Arsenide diode. The red (UR) chip is made with Aluminum Gallium Arsenide on Aluminum Gallium Arsenide diode. Applications l I.C. compatible l Excellent unifformity of light emittance l Most auitable for use like level indicator l Low power consumption NOTES : 1. Tolerance is ± 0.25 mm (.010") unless otherwise noted. 2. Protruded resin under flange is 1.5 mm (.059'') max. 3. Lead spacing is measured where the leads emerge from the package. Absolute Maximum Tatings Parameter Symbol Maximum Rating GREEN YELLOW HR Unit Power Dissipation Pad 100 60 100 mW Peak Forward Current (1/10 Duty Cycle 0.1ms pulse width) Ipf 120 80 120 A Continuous Forward Current Iaf 30 20 30 0.4 0.25 0.4 mA/ C mA 5 5 5 V o Derating Linear From 25 C Reverse Voltage VR o o Operating Temperature Range Topr -55 C to + 100 C Storage Temperature Range Tstg -55oC to + 100oC o Lead Soldering Temperature (1.6mm from body) for 3 seconds at 260 C P1 o Optical -Electrical Characteristics Part No. : MVL-721G Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Part No. : MVL-721Y Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Part No. : MVL-721HR Parameter Luminous Intensity Forward Voltage Reverse Current Wavelength Spectral Line Half Width Viewing Angle Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 Test Conditions IF=10mA IF=20mA VR=5V IF=20mA IF=20mA IF=20mA Symbol IV VF IR λp ∆λ 2θ1/2 P2 Min . 1.2 - Min . 0.8 - Min . 1.2 - Typ . 3.7 2.1 565 30 140 Typ . 2.8 2.1 585 35 140 Typ . 3.8 2.0 640 40 140 Max . 2.8 100 - @TA=25oC Unit . mcd V µA nm nm deg Max . 2.8 100 - o @TA=25 C Unit . mcd V µA nm nm deg Max . 2.8 100 - @TA=25oC Unit . mcd V µA nm nm deg G Y 1 HR HR Y 50 Forward Current IF(mA) Relative Luminous Intensity Typical Optical-Electrical Characteristic Curves 0.5 0 40 30 20 10 0 500 550 600 650 700 750 0.8 Wavelength (nm) Fig 1. RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH 1.6 2.0 2.4 2.8 5.0 Relative Luminous Intensity Forward Current IF (mA) 1.2 Forward Voltage (V) Fig 2. FORWARD CURRENT VS. FORWARD VOLTAGE 50 40 G/HR 30 Y 20 10 0 4.0 3.0 2.0 1.0 0.0 0 20 40 60 80 100 0 o Ambient Temperature ( C) Fig 3. FORWARD CURRENT VS. AMBIENT TEMPERATURE 10 20 30 40 50 Forward Current IF (mA) Fig 4. RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 0o Relative Luminous Intensity 10 Relative Luminous Intensity G 1 10o 20o 30o 40o 1.0 50o 0.9 60o 0.8 70o 80o 90o 0.1 0.5 0.3 0.1 -30 -20 -10 0 10 20 30 40 50 60 70 Ambient Temperature (oC) Fig 5. RELATIVE LUMINOUS INTENSITY VS. AMBIENT TEMPERATURE 0.2 0.4 0.6 Fig 6. RADIATION DIAGRAM P3