SENSITRON SEMICONDUCTOR SHD118222 SHD118222A SHD118222B TECHNICAL DATA DATA SHEET 4007, REV. A HERMETIC SCHOTTKY RECTIFIER Very Low Forward Voltage Drop Features: Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Maximum Ratings Characteristics Peak Inverse Voltage Max. Average Forward Current Symbol VRWM IF(AV) Max. Average Forward Current IF(AV) Max. Peak One Cycle NonRepetitive Surge Current Non-Repetitive Avalanche Energy IFSM Repetitive Avalanche Current IAR EAS Maximum Thermal Resistance R Max. Junction Temperature Max. Storage Temperature TJ Tstg JC Condition 50% duty cycle, rectangular wave form (Single) 50% duty cycle, rectangular wave form (Common Cathode) 8.3 ms, half Sine wave (per leg) TJ = 25 C, IAS = 3.0 A, L = 4.4 mH (per leg) IAS decay linearly to 0 in 1 ms limited by TJ max VA=1.5VR (Single) (Common Cathode) Max. 45 15 Units V A 30 A 200 A 20 mJ 3.0 A 1.21 0.61 C/W - -65 to +175 -65 to +175 C C Max. 0.73 0.66 2.0 Units V V mA 15 mA 800 pF Electrical Characteristics Characteristics Max. Forward Voltage Drop (per leg) Max. Reverse Current Symbol VF1 VF2 IR1 (per leg) IR2 Max. Junction Capacitance (per leg) CT Condition @ 15A, Pulse, TJ = 25 C @ 15A, Pulse, TJ = 125 C @VR = 45V, Pulse, TJ = 25 C @VR = 45V, Pulse, TJ = 125 C @VR = 5V, TC = 25 C fSIG = 1MHz, VSIG = 50mV (p-p) 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-Mail - [email protected] SHD118222 SHD118222A SHD118222B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4007, REV. A MECHANICAL DIMENSIONS: In Inches / mm .520±.020 SHD-5B (13.2±.508) .510±.020 SHD-5A (12.9±.508) .370±.010 (9.40±.254) .370±.010 (9.40±.254) .370±.010 (9.40±.254) .125±.010 (3.17±.254) .030±.010 (.762±.254) 2 .090±.010 (2.29±.254) 2 .610±.010 (15.5±.254) 2 .030±.010 (.762±.254) .030±.010 (.762±.254) 3 .110 (2.80) Max .320±.010 (8.13±.254) .610±.010 (15.5±.254) .320±.010 (8.13 ±.254) .610±.010 (15.5±.254) 3 3 Alumina Ring .110 (2.79) Max Moly Lid Terminal 1 .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Alumina Ring .060±.010 (1.52±.254) 1 2 3 PINOUT TABLE DEVICE TYPE PIN 1 DUAL RECTIFIER, COMMON CATHODE (P) COMMON CATHODE Note: The Vf curves shown are for the SD125SB45 unpackaged die only. PIN 2 ANODE PIN 3 ANODE Typical Reverse Characteristics Instantaneous Reverse Current - IR (mA) 10 2 10 1 125 °C 175 °C 10 1 150 °C 125 °C 10 0 100 °C 10 -1 75 °C 50 °C 10 -2 25 °C 10 -3 0 10 0 0.2 0.3 0.4 0.5 0.6 Forward Voltage Drop - V 0.7 F (V) 10 20 30 Reverse Voltage - V R (V) 40 50 40 50 Typical Junction Capacitance 25 °C 0.8 Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) 175 °C 800 700 600 500 400 300 200 0 .015±.002 (.381±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) Typical Forward Characteristics .020±.005 R (.508±.127 ) Alumina Ring .020±.002 (.508±.051) Moly Base Terminal 1 Moly Lid 10 20 30 Reverse Voltage - V R (V) 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-Mail - [email protected] SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •