Single-Channel: 6N135, 6N136, HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers tm Features Description ■ High speed–1MBit/s The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/ HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. ■ Superior CMR-10kV/µs ■ Dual-Channel HCPL-2530/HCPL-2531 ■ Double working voltage–480V RMS ■ CTR guaranteed 0–70°C ■ U.L. recognized (File # E90700) Applications ■ Line receivers ■ Pulse transformer replacement ■ Output interface to CMOS-LSTTL-TTL A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal noise shield provides superior common mode rejection of 10kV/µs. An improved package allows superior insulation permitting a 480V working voltage compared to industry standard of 220V. ■ Wide bandwidth analog coupling Package Schematic N/C 1 8 VCC + 1 V 8 + 2 1 7 VB F1 _ 2 7 V01 3 6 V02 VF _ 3 6 VO _ V N/C 4 8 8 VCC 5 GND F2 + 4 5 GND 8 1 1 6N135, 6N136, HCPL-2503, HCPL-4502 HCPL-2530/HCPL-2531 Pin 7 is not connected in Part Number HCPL-4502 1 ©2005 Fairchild Semiconductor Corporation Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers July 2006 Symbol Parameter Condition Value Units TSTG Storage Temperature -55 to +125 °C TOPR Operating Temperature -55 to +100 °C TSOL Lead Solder Temperature 260 for 10 sec °C IF (avg) DC/Average Forward Input Current Each Channel(1) 25 mA IF (pk) Peak Forward Input Current Each Channel(2) 50% duty cycle, 1ms P.W. 50 mA IF (trans) Peak Transient Input Current Each Channel ≤1 µs P.W., 300pps 1.0 A VR Reverse Input Voltage Each Channel 5 V PD Input Power Dissipation Each Channel 6N135/6N136 and HCPL-2503/4502 100 mW HCPL-2530/253(3) 45 EMITTER DETECTOR IO (avg) Average Output Current Each Channel 8 mA IO (pk) Peak Output Current Each Channel 16 mA VEBR Emitter-Base Reverse Voltage 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage IB Base Current 6N135, 6N136 and HCPL-2503 only PD Output Power Dissipation Each Channel 6N135, 6N136 and HCPL-2503 only -0.5 to 20 V 5 mA 6N135, 6N136, HCPL-2503, HCPL-4502(4) 100 mW HCPL-2530, HCPL-2531 35 mW Notes: 1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C. 2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C. 3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C. 4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C. 2 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Absolute Maximum Ratings (TA = 25°C unless otherwise specified) Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.45 1.7 V EMITTER VF Input Forward Voltage IF = 16mA, TA =25°C IF = 16mA BVR Input Reverse Breakdown Voltage IR = 10 µA ∆VF/∆TA Temperature Coefficient of Forward Voltage IF = 16mA 1.8 5.0 V -1.6 mV/°C DETECTOR IOH ICCL ICCH Logic High Output Current Logic Low Supply Current Logic High Supply Current IF = 0mA, VO = VCC = 5.5V, TA =25°C All 0.001 0.5 IF = 0mA, VO = VCC = 15V, TA =25°C 6N135 6N136 HCPL-4502 HCPL-2503 0.005 1 IF = 0mA, VO = VCC = 15V All µA 50 IF = 16mA, VO = Open, VCC = 15V 6N135 6N136 HCPL-4502 HCPL-2503 120 200 IF1 = IF2 = 16mA, VO = Open, VCC = 15V HCPL-2530 HCPL-2531 200 400 IF = 0mA, VO = Open, VCC = 15V, TA =25°C 6N135 6N136 HCPL-4502 HCPL-2503 1 IF = 0mA, VO = Open, VCC = 15V 6N135 6N136 HCPL-4502 HCPL-2503 2 IF = 0mA, VO = Open, VCC = 15V HCPL-2530 HCPL-2531 0.02 µA µA 4 *All Typicals at TA = 25°C 3 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified) Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit COUPLED CTR Current Transfer Ratio(5) IF = 16mA, VO = 0.4 V, VCC = 4.5V, TA =25°C IF = 16mA, VCC = 4.5V VOL Logic LOW Output Voltage 6N135 HCPL-2530 7 18 50 % 6N136 HCPL-4502 HCPL-2531 19 27 50 % HCPL-2503 12 27 % VOL = 0.4V 6N135 5 21 % VOL = 0.5V HCPL-2530 VOL = 0.4V 6N136 HCPL-4502 15 30 % VOL = 0.5V HCPL-2531 VOL = 0.4V HCPL-2503 9 30 % IF = 16mA, IO = 1.1mA, VCC = 4.5V, TA =25°C 6N135 0.18 0.4 HCPL-2530 0.18 0.5 IF = 16mA, IO = 3mA, VCC = 4.5V, TA =25°C 6N136 HCPL-2503 0.25 0.4 HCPL-2531 0.25 0.5 IF = 16mA, IO = 0.8mA, VCC = 4.5V 6N135 HCPL-2530 0.5 IF = 16mA, IO = 2.4mA, VCC = 4.5V HCPL-4502 HCPL-2531 0.5 V *All Typicals at TA = 25°C Note: 5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 4 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Transfer Characteristics (TA = 0 to 70°C Unless otherwise specified) Symbol Parameter TPHL TPLH |CMH| |CML| Propagation Delay Time to Logic LOW Propagation Delay Time to Logic HIGH Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low Test Conditions Device Min. Typ.* Max. Unit TA = 25°C, RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL-2530 0.45 1.5 µs RL = 1.9kΩ, IF = 16mA, TA = 25°C(7) (Fig. 7) 6N136 HCPL-4502 HCPL-2503 HCPL-2531 0.45 0.8 µs RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL-2530 2.0 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136 HCPL-4502 HCPL-2503 HCPL-2531 1.0 µs TA = 25°C, (RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL-2530 0.5 1.5 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) TA = 25°C 6N136 HCPL-4502 HCPL-2503 HCPL-2531 0.3 0.8 µs RL = 4.1kΩ, IF = 16mA(6) (Fig. 7) 6N135 HCPL-2530 2.0 µs RL = 1.9kΩ, IF = 16mA(7) (Fig. 7) 6N136 HCPL-4502 HCPL-2503 HCPL-2531 1.0 µs IF = 0mA, VCM = 10VP-P,, RL = 4.1kΩ, TA = 25°C(8) (Fig. 8) 6N135 HCPL-2530 10,000 V/µs IF = 0mA, VCM = 10VP-P, RL = 1.9kΩ, TA = 25°C(8) (Fig. 8) 6N136 HCPL-4502 HCPL-2503 HCPL-2531 10,000 V/µs IF = 16mA, VCM = 10 VP-P, RL = 4.1kΩ, TA = 25°C(8) (Fig. 8) 6N135 HCPL-2530 10,000 V/µs IF = 16mA, VCM = 10 VP-P, RL = 1.9kΩ(8) (Fig. 8) 6N136 HCPL-4502 HCPL-2503 HCPL-2531 10,000 V/µs ** All Typicals at TA = 25°C Notes: 6. The 4.1kΩ load represents 1 LSTTL unit load of 0.36mA and 6.1kΩ pull-up resistor. 7. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor. 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). 5 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Switching Characteristics (TA = 0 to 70°C unless otherwise specified., VCC = 5V) Symbol II-O Characteristics Test Conditions Input-Output Insulation Leakage Current Relative humidity = 45%, TA = 25°C, t = 5s, VI-O = 3000 VDC(9) VISO Withstand Insulation Test Voltage RH ≤ 50%, TA = 25°C, II-O ≤ 2 µA, t = 1 min.(9) RI-O Resistance (Input to Output) VI-O = 500VDC(9) MHz(9) CI-O Capacitance (Input to Output) f=1 HFE DC Current Gain IO = 3mA, VO = 5V(9) II-I Input-Input Insulation Leakage RH ≤ 45%, VI-I = 500VDC(10) Current t = 5 s, (HCPL-2530/2531 only) RI-I Input-Input Resistance CI-I Input-Input Capacitance Min Typ** 2500 Max Unit 1.0 µA VRMS 1012 Ω 0.6 pF 150 0.005 µA VI-I = 500 VDC(10) (HCPL-2530/2531 only) 1011 Ω f = 1MHz)(10) (HCPL-2530/2531 only) 0.03 pF Notes: 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. I 6 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified) 1.0 1.0 NORMALIZED CTR NORMALIZED CTR Fig. 2 Normalized CTR vs. Temperature 1.2 0.8 0.6 0.4 VO = 0.4 V VCC = 5 V TA = 25°C Normalized to: IF = 16 mA 0.2 0.0 0.1 1 0.8 0.6 0.4 10 0.0 -60 100 -40 -20 IF - FORWARD CURRENT (mA) 20 40 60 80 100 80 100 Fig. 4 Logic High Output Current vs. Temperature 1000 TA = 25°C VCC = 5 V 14 IOH - LOGIC HIGH OUTPUT CURRENT (nA) 16 IO - OUTPUT CURRENT (mA) 0 TA - TEMPERATURE (°C) Fig. 3 Output Current vs. Output Voltage IF = 40 mA IF = 35 mA 12 IF = 30 mA 10 IF = 25 mA 8 IF = 20 mA 6 IF = 15 mA 4 IF = 10 mA 2 IF = 5 mA 0 2 4 6 8 10 12 14 16 18 IF = 0 mA VCC = 5 V VO = 5 V 100 10 1 0.1 -60 0 20 -40 -20 20 40 60 Fig. 6 Propagation Delay vs. Load Resistance Fig. 5 Propagation Delay vs. Temperature 800 10000 700 RL = 4.1 K (TPLH) TP - PROPAGATION DELAY (ns) 600 0 TA - TEMPERATURE (°C) VO - OUTPUT VOLTAGE (V) Tp - PROPAGATION DELAY (ns) IF = 16mA VCC = 5 V VO = 0.4 V Normalized to: TA = 25°C 0.2 RL = 4.1 K (TPLH) 500 400 300 200 RL = 1.9 K (TPHL) IF = 16 mA VCC = 5 V RL = 1.9 K (TPLH) 100 IF - 16 mA (TPHL) IF - 10 mA (TPHL) 1000 IF - 16 mA (TPLH) IF - 10 mA (TPLH) 0 -60 -40 -20 0 20 40 TA - TEMPERATURE (°C) 60 80 100 VCC = 5 V TA = 25°C 100 1 10 RL = LOAD RESISTANCE (kΩ) 7 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Fig. 1 Normalized CTR vs. Forward Current 1.2 Noise Shield 8 + 2 7 VF - 3 6 VCC VB +5 V 4 5 IF MONITOR 1 8 VCC +5 V RL VF1 - 7 2 V01 VO C L = 1.5 µF 3 6 4 5 VF2 + Rm C L = 1.5 µF GND Noise Shield + - VO 0.1 µF Rm IF 10% DUTY CYCLE I/f < 100µS RL VO I F Monitor Pulse Generator tr = 5ns Z O = 50 Ω V02 0.1 µF GND Test Circuit for HCPL-2530 and HCPL-2531 Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502 IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 7 Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC + +5 V IF VB VF1 - RL Noise Shield 1 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 VO B VO VFF 0.1 µF VFF 5 4 + GND VF2 + - V02 0.1 µF GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502 Test Circuit for HCPL-2530 and HCPL-2531 VCM 10 V 0V 90% 90% 10% tr VO 10% tf 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Fig. 8 Common Mode Immunity Test Circuit 8 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Pulse Generator I F tr = 5ns Z O = 50 Ω 10% D.C. I/f < 100µs 1 Through Hole Surface Mount 0.390 (9.91) 0.370 (9.40) 4 PIN 1 ID. 4 3 2 3 2 1 1 0.270 (6.86) 0.250 (6.35) 0.270 (6.86) 0.250 (6.35) 5 6 8 7 5 6 7 SEATING PLANE 0.390 (9.91) 0.370 (9.40) 8 0.070 (1.78) 0.045 (1.14) 0.070 (1.78) 0.045 (1.14) 0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.016 (0.40) 0.008 (0.20) 0.100 (2.54) TYP 0.022 (0.56) 0.016 (0.41) 15° MAX 0.300 (7.62) TYP 0.4” Lead Spacing 3 0.300 (7.62) TYP 0.020 (0.51) MIN 0.020 (0.51) MIN 0.200 (5.08) 0.140 (3.55) 4 PIN 1 ID. 0.100 (2.54) TYP Lead Coplanarity : 0.004 (0.10) MAX 0.016 (0.41) 0.008 (0.20) 0.045 [1.14] 0.315 (8.00) MIN 0.405 (10.30) MIN Recommend Pad Layout for Surface Mount Leadform 2 PIN 1 ID. 1 0.070 (1.78) 0.270 (6.86) 0.250 (6.35) 0.060 (1.52) 5 6 7 8 SEATING PLANE 0.390 (9.91) 0.370 (9.40) 0.100 (2.54) 0.295 (7.49) 0.070 (1.78) 0.045 (1.14) 0.415 (10.54) 0.030 (0.76) 0.004 (0.10) MIN 0.200 (5.08) 0.140 (3.55) 0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.016 (0.40) 0.008 (0.20) 0.100 (2.54) TYP 0° to 15° 0.400 (10.16) TYP 9 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Package Dimensions All dimensions are in inches (millimeters) Option Example Part Number Description S 6N135S SD 6N135SD W 6N135W 0.4" Lead Spacing V 6N135V VDE0884 WV 6N135WV VDE0884; 0.4” lead spacing SV 6N135SV VDE0884; surface mount SDV 6N135SDV Surface Mount Lead Bend Surface Mount; Tape and reel VDE0884; surface mount; tape and reel Marking Information 1 V 3 2503 2 XX YY T1 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 Two digit year code, e.g., ‘03’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code 10 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Ordering Information 12.0 ±0.1 4.0 ±0.1 4.90 ±0.20 Ø1.55 ±0.05 4.0 ±0.1 0.30 ±0.05 1.75 ±0.10 7.5 ±0.1 16.0 ±0.3 13.2 ±0.2 10.30 ±0.20 Ø1.6 ±0.1 10.30 ±0.20 0.1 MAX User Direction of Feed Reflow Profile Temperature (°C) 300 215 C, 10–30 s 250 225 C peak 200 150 Time above 183C, 60–150 sec 100 50 Ramp up = 3C/sec 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) • Peak reflow temperature: 225C (package surface temperature) • Time of temperature higher than 183C for 60–150 seconds • One time soldering reflow is recommended 11 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers Carrier Tape Specifications The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. FACT Quiet Series™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FAST® FASTr™ FPS™ FRFET™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyBoost™ TinyBuck™ TinyPWM™ TinyPower™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I20 12 Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 Rev. 1.0.5 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL-2503, HCPL-4502 Dual-Channel: HCPL-2530, HCPL-2531 High Speed Transistor Optocouplers TRADEMARKS