FAIRCHILD HCPL0501R2V

HCPL0452, HCPL0453, HCPL0500, HCPL0501,
HCPL0530, HCPL0531, HCPL0534
High Speed Transistor Optocouplers
tm
Single Channel: HCPL0452 HCPL0453 HCPL0500 HCPL0501
Dual Channel: HCPL0530 HCPL0531 HCPL0534
Features
Description
■ High speed – 1 MBit/s
■ 15kV/µs minimum common mode transient immunity at
VCM = 1500V (HCPL0453/0534)
■ Open collector output
■ Guaranteed performance over temperature: 0°C to 70°C
■ U.L. recognized (File # E90700)
■ VDE0884 recognized (file#136616)
– approval pending for HCPL0530/0531/0453
– ordering option V, e.g., HCPL0500V
■ BSI recognized (file# 8661, 8662)
– HCPL0452/0500/0501 only
The HCPL05XX, and HCPL04XX optocouplers consist of an
AlGaAs LED optically coupled to a high speed photodetector
transistor housed in a compact 8-pin small outline package.
Applications
(positive Logic)
■
■
■
■
A separate connection for the bias of the photodiode improves
the speed by several orders of magnitude over conventional
phototransistor optocouplers by reducing the base-collector
capacitance of the input transistor. The HCPL04XX devices do
not have the base bonded out to a lead for additional noise margin. The HCPL053X devices have two channels per package for
optimum mounting density.
Truth Table
Line receivers
Pulse transformer replacement
Output interface to CMOS-LSTTL-TTL
Wide bandwidth analog coupling
LED
VO
ON
LOW
OFF
HIGH
Package Dimensions
0.164 (4.16)
0.144 (3.66)
N/C 1
8 VCC
+ 2
VB*
+ 1
SEATING PLANE
V
Pin 1
7
8 VCC
F1
_
2
7 V01
3
6 V02
VF
0.202 (5.13)
0.182 (4.63)
_
3
6 VO
_
V
0.019 (0.48)
N/C 4
5 GND
F2
+ 4
5 GND
0.010 (0.25)
0.006 (0.16)
0.143 (3.63)
0.123 (3.13)
0.008 (0.20)
0.003 (0.08)
0.021 (0.53)
0.011 (0.28)
HCPL0500, HCPL0501
0.244 (6.19)
0.224 (5.69)
*BASE NOT CONNECTED
HCPL0530/HCPL0531/HCPL0534
FOR HCPL0452, HCPL0453
0.050 (1.27)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
NOTE
All dimensions are in inches (millimeters)
©2005 Fairchild Semiconductor Corporation
HCLP0XXX Rev. 1.0.3
1
www.fairchildsemi.com
HCLP0XXX High Speed Transistor Optocouplers
May 2006
HCLP0XXX High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Symbol
Parameter
Value
Units
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +85
°C
Reflow Temperature Profile (Refer to page 9)
EMITTER
IF (avg)
DC/Average Forward Input Current
25
mA
IF (pk)
Peak Forward Input Current (50% duty cycle, 1 ms P.W.)
50
mA
Peak Transient Input Current - ([≤1 µs P.W., 300 pps)
IF (trans)
1.0
A
VR
Reverse Input Voltage
5
V
PD
Input Power Dissipation
45
mW
DETECTOR
IO (avg)
Average Output Current (Pin 6)
8
mA
IO (pk)
Peak Output Current
16
mA
VEBR
Emitter-Base Reverse Voltage (HCPL0500/HCPL0501 only)
5
V
VCC
Supply Voltage
-0.5 to 30
V
VO
Output Voltage
-0.5 to 20
V
IB
Base Current (HCPL0500/HCPL0501 only)
5
mA
PD
Output power dissipation
100
mW
Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified)
Individual Component Characteristics
Symbol
Parameter
VF
Test Conditions
EMITTER
(IF = 16 mA,
TA = 25°C)
Device
Min Typ** Max
Unit
All
1.45
V
1.7
Input Forward Voltage
(IF = 16 mA)
BVR
Input Reverse Breakdown Voltage
(IR = 10 µA)
All
(∆VF/∆TA)
Temperature coefficient of forward
voltage
(IF = 16 mA)
All
-1.6
DETECTOR
(IF = 0 mA, VO = VCC = 5.5V)
(TA = 25°C)
All
0.001
0.5
Logic high output current
(IF = 0 mA, VO = VCC = 15 V)
(TA =25°C)
All
0.005
1
120
200
IOH
(IF = 0 mA, VO = VCC = 15 V)
ICCL
Logic low supply current
(IF = 16 mA, VO = Open)
(VCC = 15 V)
1.8
5.0
V
All
HCPL0452/3/
0500/1
Logic high supply current
(IF = 0 mA, VO = Open)
(VCC = 15 V) (TA = 25°C)
(IF = 0 mA, VO = Open)
(VCC = 15 V)
2
HCLP0XXX Rev. 1.0.3
All
µA
50
HCPL0530/1/4
ICCH
mV/°C
µA
400
0.01
1
HCPL0452/3/
0500/1
2
HCPL0530/1/4
4
µA
www.fairchildsemi.com
Symbol
CTR
Parameter
Test Conditions
COUPLED
(IF = 16 mA, VO = 0.4 V)
(VCC = 4.5 V, TA = 25°C)
Device
Min Typ** Max
HCPL0500/0530
7
2.7
50
HCPL0452/3
19
27
50
HCPL0500
5
30
HCPL0452/3
15
30
Unit
%
HCPL0501/0531
Current tranfer ratio
(Note 1)
(IF = 16 mA, VO = 0.5V)
(VCC = 4.5 V)
HCPL0501/0534
VOL
Logic low output voltage
(IF = 16 mA, IO = 1.1 mA)
(VCC = 4.5 V, TA = 25°C)
HCPL0500
0.18
HCPL0530
V
0.5
(IF = 16 mA, IO = 3 mA)
HCPL0452/3
(VCC = 4.5 V, TA = 25°C) HCPL0501/0531/4
(IF = 16 mA, IO = 0.8 mA)
(VCC = 4.5)
0.4
HCPL0500
HCPL0530
(IF = 16 mA, IO = 2.4 mA)
HCPL0452/3
(VCC = 4.5) HCPL0501/0531/4
0.25
0.4
0.13
0.5
0.23
0.5
** All typicals at TA = 25°C
Switching Characteristics (TA = 0 to 70°C unless otherwise specified., VCC = 5 V)
Symbol
TPHL
Parameter
Propagation
delay time to
logic low
Test Conditions
Device
TA = 25°C, (RL = 4.1 kΩ, IF = 16mA) (Note 2)
(Fig. 9)
Min
HCPL0500/0530
(RL = 1.9 kΩ, IF = 16mA) (Note 3) (Fig. 9)
HCPL0452/3
TA = 25°C
HCPL0501/0531/4
Typ** Max Unit
0.45
1.5
0.45
0.8
(RL = 4.1 kΩ, IF = 16mA) (Note 2) (Fig. 9)
HCPL0500/0530
2.0
(RL = 1.9 kΩ, IF = 16mA) (Note 3) (Fig. 9)
HCPL0452/3
1.0
µs
HCPL0501/0531/4
TPLH
Propagation
delay time to
logic high
TA = 25°C, (RL = 4.1 kΩ, IF = 16mA) (Note 2)
(Fig. 9)
HCPL0500/0530
HCPL0452/3
(RL = 1.9 kΩ, IF = 16mA) (Note 3) (Fig. 9)
TA = 25°C HCPL0501/0531/4
(RL = 4.1 kΩ, IF = 16mA) (Note 2) (Fig. 9)
(RL = 1.9 kΩ, IF = 16mA) (Note 3) (Fig. 9)
0.5
1.5
0.3
0.8
HCPL0500/0530
2.0
HCPL0452/3
1.0
µs
HCPL0501/0531/4
|CMH|
|CML|
Common
mode transient
immunity at
logic high
Common
mode transient
immunity at
logic low
(IF = 0 mA, VCM = 10 VP-P, RL = 4.1kV)
(Note 4) (Fig. 10) TA = 25°C
(IF = 0 mA, VCM = 10 VP-P)
TA = 25°C, (RL = 1.9kΩ)
(Note 4) (Fig. 10)
1,000
10,000
1,000
10,000
HCPL0452
HCPL0501/31
HCPL0534
15,000 40,000
HCPL0453
15,000 40,000
(IF = 16 mA, VCM = 10 VP-P, RL = 4.1kΩ)
(Note 4) (Fig. 10) TA = 25°C
HCPL0500
1,000
10,000
(IF = 16 mA, VCM = 10 VP-P)
TA = 25°C, (RL = 1.9kΩ)
(Note 4) (Fig. 10)
HCPL0452
1,000
10,000
3
V/µs
HCPL0530
(IF = 16 mA, VCM = 1500 VP-P, RL = 1.9Ω,
TA = 25°C) (Note 4) (Fig. 10)
(IF = 16 mA, TA = 25°C, VCM = 1500 VP-P,
CL = 15pF) (Note 4) (Fig. 10)
HCLP0XXX Rev. 1.0.3
HCPL0500
V/µs
HCPL0530
HCPL0501/31
HCPL0534
15,000 40,000
HCPL0453
15,000 40,000
www.fairchildsemi.com
HCLP0XXX High Speed Transistor Optocouplers
Transfer Characteristics (TA = 0 to 70°C Unless)
Symbol
Characteristics
VISO
Input-Output Isolation Voltage
RISO
Isolation Resistance
CISO
Isolation Capacitance
Test Conditions
Min
Typ**
Max
Unit
(note 5, 6) (f = 60 Hz, t = 1.0 min)
(II-O ≤ 2 µA)
2500
—
—
VacRMS
(note 5) (VI-O = 500 V)(9)
1011
—
—
_
(note 5) (VI-O = 0 , f = 1.0 MHz)(9)
—
0.2
—
pF
** All typicals at TA = 25°C
NOTES
1 Current Transfer Ratio is designed as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%.
2. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36 mA and 6.1kΩ pull-up resistor.
3. The 1.9 kΩ load represents 1 TTL unit load of 1.6 mA and 5.6 kΩ pull-up resistor.
4. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the
output will remain in a logic high state (i.e., VO>2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of
the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V).
5. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together.
6. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.
4
HCLP0XXX Rev. 1.0.3
www.fairchildsemi.com
HCLP0XXX High Speed Transistor Optocouplers
Isolation Characteristics (TA = 0°C to +70°C Unless otherwise specified.)
Fig. 2 Normalized CTR vs. Temperature
1.2
1.0
1.0
NORMALIZED CTR
NORMALIZED CTR
Fig. 1 Normalized CTR vs. Forward Current
1.2
0.8
0.6
0.4
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
IF = 16 mA
0.2
0.0
0.1
1
0.8
0.6
0.4
10
0.0
-60
100
-40
-20
IF - FORWARD CURRENT (mA)
20
40
60
80
100
80
100
Fig. 4 Logic High Output Current
vs. Temperature
1000
TA = 25°C
VCC = 5 V
14
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
16
IO - OUTPUT CURRENT (mA)
0
TA - TEMPERATURE (°C)
Fig. 3 Output Current vs. Output Voltage
IF = 40 mA
IF = 35 mA
12
IF = 30 mA
10
IF = 25 mA
8
IF = 20 mA
6
IF = 15 mA
4
IF = 10 mA
2
IF = 5 mA
0
2
4
6
8
10
12
14
16
18
IF = 0 mA
VCC = 5 V
VO = 5 V
100
10
1
0.1
-60
0
20
-40
-20
20
40
60
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 Propagation Delay vs. Temperature
800
10000
700
RL = 4.1 K (TPLH)
TP - PROPAGATION DELAY (ns)
600
0
TA - TEMPERATURE (°C)
VO - OUTPUT VOLTAGE (V)
Tp - PROPAGATION DELAY (ns)
IF = 16mA
VCC = 5 V
VO = 0.4 V
Normalized to:
TA = 25°C
0.2
RL = 4.1 K (TPLH)
500
400
300
200
RL = 1.9 K (TPHL)
IF = 16 mA
VCC = 5 V
RL = 1.9 K (TPLH)
100
IF - 16 mA (TPHL)
IF - 10 mA (TPHL)
1000
IF - 16 mA (TPLH)
IF - 10 mA (TPLH)
0
-60
-40
-20
0
20
40
60
80
100
100
1
TA - TEMPERATURE (°C)
10
RL = LOAD RESISTANCE (k )
5
HCLP0XXX Rev. 1.0.3
VCC = 5 V
TA = 25°C
www.fairchildsemi.com
HCLP0XXX High Speed Transistor Optocouplers
Typical Performance Curves
Noise
Shield
8
+
2
7
VF
-
3
6
VCC
VB
Pulse
Generator
tr = 5ns
Z O = 50
+5 V
10% DUTY CYCLE
I/f < 100∝S
RL
VO
4
Rm
5
IF
MONITOR
1
Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501
8
VCC
+5 V
RL
VF1
-
7
2
V01
VO
C L = 1.5 ∝F
3
6
4
5
VF2
+
Rm
C L = 1.5 ∝F
GND
Noise
Shield
+
-
VO
0.1 ∝F
I F Monitor
IF
V02
0.1 ∝F
GND
Test Circuit for HCPL0530, HCPL0531 and HCPL0534
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
Noise
Shield
8
+
2
A
B
7
VCC
+
+5 V
IF
VB
VF1
-
RL
Noise
Shield
1
8
VCC
+5 V
RL
2
7
3
6
4
5
V01
VO
A
VF
-
3
6
VO
B
VO
VFF
0.1 ∝F
VFF
4
5
+
GND
VF2
+
-
V02
0.1 ∝F
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for HCPL0452, HCPL0453, HCPL0500 and HCPL0501
Test Circuit for HCPL0530, HCPL0531 and HCPL0534
VCM 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
6
HCLP0XXX Rev. 1.0.3
www.fairchildsemi.com
HCLP0XXX High Speed Transistor Optocouplers
Pulse
Generator I
F
tr = 5ns
Z O = 50
10% D.C.
I/f < 100∝s
1
Option
Order Entry
Identifier
V
V
R1
R1
R1V
R1V
R2
R2
R2V
R2V
Description
VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534)
Tape and reel (500 units per reel)
VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534), Tape and reel (500 units
per reel)
Tape and reel (2500 units per reel)
VDE 0884 (approval pending for HCPL0530, HCPL0531 & HCPL0534), Tape and reel (2500 units
per reel)
Marking Infomation
1
500
V
3
X YY S
2
6
5
4
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with
VDE option – See order entry table)
4
One digit year code, e.g., ‘3’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
7
HCLP0XXX Rev. 1.0.3
www.fairchildsemi.com
HCLP0XXX High Speed Transistor Optocouplers
Ordering Information
HCLP0XXX High Speed Transistor Optocouplers
Carrier Tape Specifications
8.0 ± 0.10
3.50 ± 0.20
2.0 ± 0.05
Ø1.5 MIN
4.0 ± 0.10
0.30 MAX
1.75 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
8.3 ± 0.10
5.20 ± 0.20
Ø1.5 ± 0.1/-0
6.40 ± 0.20
0.1 MAX
User Direction of Feed
Reflow Profile
300
260°C
280
260
>245°C = 42 Sec
240
220
200
180
°C
Time above
183°C = 90 Sec
160
140
120
1.822°C/Sec Ramp up rate
100
80
60
40
33 Sec
20
0
0
60
120
180
270
360
Time (s)
8
HCLP0XXX Rev. 1.0.3
www.fairchildsemi.com
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
FAST®
FASTr™
ActiveArray™
FPS™
Bottomless™
FRFET™
Build it Now™
GlobalOptoisolator™
CoolFET™
GTO™
CROSSVOLT™
HiSeC™
DOME™
I2C™
EcoSPARK™
2
i-Lo™
E CMOS™
EnSigna™
ImpliedDisconnect™
FACT™
IntelliMAX™
FACT Quiet Series™
Across the board. Around the world.™
The Power Franchise®
Programmable Active Droop™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench®
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
TinyLogic®
TINYOPTO™
TruTranslation™
UHC™
UniFET™
UltraFET®
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS,
SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, or (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I19
9
HCLP0XXX Rev. 1.0.3
www.fairchildsemi.com
HCLP0XXX High Speed Transistor Optocouplers
TRADEMARKS