MA-COM SR6A6K24

General Purpose Relays
Safety Relay SR6
I
6 pole safety relay with either
4 NO+2 NC or 3 NO+3 NC or 5 NO+1 NC contacts
I
Forcibly guided contacts according to EN50205
I
Rated current 8 A
I
coil power 800 mW or 1200 mW
I
RoHS compliant (Directive 2002/95/EC)
Applications
Emergency shut-off, press control, machine control, elevator
and escalator control, safety modules
F0206-DS
Approvals (in preperation)
V
REG.-Nr. 128935, Z E214024, T
Technical data of approved types on request
Contact data
Contact configuration
3 NO contacts and 3 NC contacts
4 NO contacts and 2 NC contacts
5 NO contacts and 1 NC contact
Contact set
single contact, forcibly guided
type A according to EN 50205
Type of interruption
micro disconnection
Rated current
8A
Rated voltage / max.switching voltage AC
240 / 400 VAC
Maximum breaking capacity AC
2000 VA
Contact material
800 mW version
AgSnO2 + 0,2 μm Au
1200 mW version
AgSnO2
Minimum contact load
10 mA / 5 V
Contact resistance
w 100 mOhm / 1 A / 24 VDC
w 20 Ohm / 10 mA / 5 VDC
Mechanical endurance
10x106 cycles
Rated frequency of operation with / without load
6 min-1 / 150 min-1
Contact ratings
Type
SR6 NO contact
SR6 NC contact
SR6 NO contact
SR6 NO contact
Coil data
Load
8A, 250VAC, resistiv, 70°C, EN61810-1
8A, 250VAC, resistiv, 70°C, EN61810-1
5A, 250VAC, AC15, 70°C, EN60947-5-1
5A, 24VDC, DC13, 25°C, EN60947-5-1
800 mW
Cycles
50x103
20x103
50x103
45x103
1200 mW
Rated coil voltage range DC coil
5...110 VDC
Coil power DC coil
appr. 800 mW
appr. 1200 mW
Operative range
2
Coil versions, 800 mW, DC-coil
Coil code
Nominal
Pull-in
Release
Coil
Rated coil
Order. code voltage
voltage
voltage
resistance
power
block 4
VDC
VDC
VDC
c
mW
K05
5
3.8
0.5
31+10%
806
K06
6
4.5
0.6
45+10%
800
K09
9
6.8
0.9
101+10%
802
K12
12
9.0
1.2
180+10%
800
K18
18
13.5
1.8
405+10%
800
K21
21
15.8
2.1
551+10%
800
K24
24
18.0
2.4
720+10%
800
K36
36
27.0
3.6
1620+10%
800
K40
40
30.0
4.0
2000+10%
800
K48
48
36.0
4.8
2880+10%
800
K60
60
45.0
6.0
4500+10%
800
K85
85
63.8
8.5
9031+10%
800
L10
110
82.5
11.0
15130+10%
800
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
1
Datasheet
Rev. FC1
Issued 2006/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
Safety Relay SR6 (Continued)
Coil versions, 1200 mW, DC-coil
Coil
Rated
Operate
Release/Reset
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
c
mW
012
12
9.0
1.2
120+10%
1200
018
18
13.5
1.8
270+10%
1200
021
21
15.8
2.1
368+10%
1198
024
24
18.0
2.4
480+10%
1200
048
48
36.0
4.8
1920+10%
1200
110
110
82.5
11.0
10080+12%
1200
All figures are given for coil without preenergization, at ambient temperature +23°C
Insulation
Insulation resistance coil-contact circuit
Dielectric strength coil-contact circuit
open contact circuit
adjacent contact circuits
Clearance / creepage coil-contact circuit
adjacent contact circuits
Material group of insulation parts
Tracking index of relay base
Insulation to IEC 60664-1
Type of insulation coil-contact circuit
open contact circuit
adjacent contact circuits
Rated insulation voltage
Pollution degree
Rated voltage system
Overvoltage category
Insulation to EN 50178
Type of insulation coil-contact circuit
adjacent contact circuits
> 100x106 Ohm
4000 Vrms
1500 Vrms
3000 Vrms
W 5.5 / 5.5 mm
W 5.5 / 5.5 mm
W IIIa
PTI 250
PCB layout / terminal assignment
Bottom view
4 NO+2 NC and 3 NO+3 NC versions
basic
functional
basic
250 V
2
230/400 V
III
S0368-CA
reinforced
reinforced
Other data
RoHS - Directive 2002/95/EC
Ambient temperature range
Vibration resistance (function) NO / NC contact
Shock resistance (function) NO / NC contact
Category of protection
Resistance to soldering heat
Relay weight
Packaging unit
compliant
-25...+70°C
> 10 / 2.5 g, 10....200 Hz
> 10 / 2.5 g, 16 ms half sine
RT III 1)
260°C / 5 s
30 g
10 pcs
S0368-CB
1
) please contact technical support for washing parameters
Accessories
S0368-CC
PCB socket and hold down clip
contact technical support
5 NO + 1 NC version
Dimensions
S0368-CE
S0367-DN
S0368-CD
2
Datasheet
Rev. FC1
Issued 2006/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
Safety Relay SR6 (Continued)
Product key
S R 6
Type
Contact configuration
A 3 NO + 3 NC contacts
B 4 NO + 2 NC contacts
C 5 NO + 1 NC contacts
Contact material
4 AgSnO2, for 1200 mW version only
6 AgSnO2 + 0.2 μm Au, for 800 mW version only
Coil
Coil code = rated coil voltage (e.g. 024=24 VDC)
Available types please see Part Number table
800 mW version
Product key
SR6A6K05
SR6B6K05
SR6C6K05
SR6A6K06
SR6B6K06
SR6C6K06
SR6A6K09
SR6B6K09
SR6C6K09
SR6A6K12
SR6B6K12
SR6C6K12
SR6A6K15
SR6B6K15
SR6C6K15
SR6A6K18
SR6B6K18
SR6C6K18
SR6A6K21
SR6B6K21
SR6C6K21
SR6A6K24
SR6B6K24
SR6C6K24
SR6A6K36
SR6B6K36
SR6C6K36
SR6A6K40
SR6B6K40
SR6C6K40
SR6A6K48
SR6B6K48
SR6C6K48
SR6A6K60
SR6B6K60
SR6C6K60
SR6A6K85
SR6B6K85
SR6C6K85
SR6A6L10
SR6B6L10
SR6C6L10
Type
6-pole
safety relay
Contact material
AgSnO2
+ 0.2 μm Au
Contact configuration
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
3 NO + 3 NC
4 NO + 2 NC
5 NO + 1 NC
Coil
5 VDC
6 VDC
9 VDC
12 VDC
15 VDC
18 VDC
21 VDC
24 VDC
36 VDC
40 VDC
48 VDC
60 VDC
85 VDC
110 VDC
Part number
5-1415537-8
7-1415537-2
8-1415537-7
5-1415537-9
7-1415537-4
8-1415537-8
6-1415537-0
7-1415537-5
8-1415537-9
6-1415537-1
7-1415537-6
9-1415537-0
6-1415537-2
7-1415537-7
9-1415537-1
6-1415537-3
7-1415537-8
9-1415537-2
6-1415537-4
7-1415537-9
9-1415537-3
6-1415537-5
8-1415537-0
9-1415537-4
6-1415537-6
8-1415537-1
9-1415537-5
6-1415537-7
8-1415537-2
9-1415537-6
6-1415537-8
8-1415537-3
9-1415537-7
6-1415537-9
8-1415537-4
9-1415537-8
7-1415537-0
8-1415537-5
9-1415537-9
7-1415537-1
8-1415537-6
6-1415538-0
3
Datasheet
Rev. FC1
Issued 2006/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
Safety Relay SR6 (Continued)
1200 mW version
Product key
SR6B4012
SR6B4018
SR6A4021
SR6B4021
SR6A4024
SR6B4024
SR6C4024
SR6B4048
SR6A4110
SR6B4110
SR6C4110
Prior product key Contact configuration
V23050-A1012-A542
AgSnO2
V23050-A1018-A542
V23050-A1021-A533
V23050-A1021-A542
V23050-A1024-A533
V23050-A1024-A542
V23050-A1024-A551
V23050-A1048-A542
V23050-A1110-A533
V23050-A1110-A542
V23050-A1110-A551
Contact material
4 NO + 2 NC
3
4
3
4
5
4
3
4
5
NO
NO
NO
NO
NO
NO
NO
NO
NO
+
+
+
+
+
+
+
+
+
3
2
3
2
1
2
3
2
1
NC
NC
NC
NC
NC
NC
NC
NC
NC
Coil
12 VDC
18 VDC
21 VDC
24 VDC
48 VDC
110 VDC
Part number
0-1393260-4
0-1393260-5
3-1415018-1
0-1393260-6
0-1415015-1
0-1393260-7
0-1415017-1
1-1393260-0
9-1415018-1
1-1393260-3
5-1415019-1
4
Datasheet
Rev. FC1
Issued 2006/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical parameters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.