General Purpose Relays Power PCB Relay RT1 Inrush I 1 pole 16 A, 1 CO or 1 NO contact I For inrush peak currents up to 80 A I Sensitive coil 400 mW I 5 kV / 10 mm coil-contact I Reinforced insulation I Ambient temperature 85°C I RoHS compliant (Directive 2002/95/EC) as per product date code 0413 Applications F0177-B Domestic appliances, heating control, lighting control Approvals V REG.-Nr. 6106, Z E214025 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated current Rated voltage / max.switching voltage AC Limiting continuous current Maximum breaking capacity AC Limiting making capacity, max 4 s, duty factor 10% max 20 ms (incandescent lamps) Contact material Mechanical endurance Rated frequency of operation with / without load Contact Type RT31K RT31L RT31K RT31L RT31L 1 CO or 1 NO single contact micro disconnection 16 A 240/400 VAC UL: 20 A 4000 VA 30 A 80 A AgNi 90/10, AgSnO2 > 30 x 106 cycles 6 / 1200 min-1 ratings Load 1000 W incandescent lamp, 250 VAC, NO contact 1000 W incandescent lamp, 250 VAC, NO contact 16 A, 240 VAC, NO contact, 85°C, VDE/UL508 16 A, 240 VAC, NO contact, 85°C, VDE/UL508 21/3.5 A, 230 VAC, compressor, cosϕ=0.5, NO contact Cycles 9x104 8x104 3x104 5x104 2,3x105 Coil data, DC-coil Rated coil voltage range DC coil Coil power DC coil Operative range Coil insulation system according UL1446 5...110 VDC typ 400 mW 2 class F Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC c mW +10% 012 12 8.4 1.2 360+ 400 +10% 024 24 16.8 2.4 1440+ 400 048 48 33.6 4.8 5520+10% 417 060 60 42.0 6.0 8570+12% 420 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request 1 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power PCB Relay RT1 Inrush (Continued) Coil data, bistable coils Coil power Operative range Limiting voltage, % of rated coil voltage Minimum energization duration Maximum energization duration Coil insulation system according UL1446 1 coil typ 400 mW 2 coils typ 600 mW 2 120% 150% 30 ms 1 min at < 10% DF class F Coil versions, bistable coil Coil Rated Operate Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC c mW bistable, 1 coil A05 5 3.5 3.5 62+10% 403 A06 6 4.2 4.2 90+10% 400 +10% A12 12 8.4 8.4 360+ 400 +10% A24 24 16.8 16.8 1440+ 400 bistable, 2 coils F05 5 3.5 3.5 42+10% 595 F06 6 4.2 4.2 55+10% 655 +10% F12 12 8.4 8.4 240+ 600 +10% F24 24 16.8 16.8 886+ 650 All figures are given for coil without preenergization, at ambient temperature +23°C Other coil voltages on request Coils - operation Version Coil terminals Pull-in Reset Contact position not defined at delivery 1 coil A1 A2 + + A1 - 2 coils A3 + + A2 - Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 60664-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree Rated voltage system Overvoltage category 5000 Vrms 1000 Vrms W 10 / 10 mm W IIIa PTI 250 V reinforced functional 250 V 3 240 V 2 400 V III Other data RoHS - Directive 2002/95/EC compliant as per product date code 0413 Flammability class according to UL94 V-0 Ambient temperature range DC coil -40...+85°C bistable 1 coil -10...+85°C bistable 2 coils -40...+85°C Operate- / release time DC coil typ 8 / 3 ms Operate- / reset time bistable typ 5 / 4 ms Bounce time NO / NC contact typ 2 / 3 ms Vibration resistance DC coil (function) NO / NC contact 20 / 5 g, 30 ... 500 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof Mounting pcb or on socket Mounting distance 0 mm Resistance to soldering heat flux-proof version 270 °C / 10 s Relay weight 14 g Packaging unit DC coil, bistable 1 coil 20 / 500 pcs bistable 2 coils 100 pcs Accessories For details see datasheet Accessories Power Relay RT 2 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change. General Purpose Relays Power PCB Relay RT1 Inrush (Continued) PCB layout / terminal assignment Bottom view on solder pins 16 A, 1 CO contact, pinning 5 mm monostable version bistable version a) S0163-CI S0163-BE S0418-CA 16 A, 1 NO contact, pinning 5 mm monostable version bistable version a) S0163-CS S0163-BF S0418-CU a) Indicated contact position during or after coil energization with reset voltage. *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. b) for 2 coil version only Dimensions S0272-BC Product key R T 3 Type Version 3 16 A, pinning 5 mm, flux proof Contact configuration 1 1 CO contact 3 1 NO contact Contact material K AgNi 90/10 L AgSnO2 Coil Coil code: please refer to coil versions table, preferred types in bold print Product key RT33K012 RT33K024 RT33K048 RT33L012 RT33L024 RT33L048 Version 16 A pinning 5 mm Contacts 1 NO contact Contact material AgNi 90/10 AgSnO2 Coil 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC 48 VDC Part number 2-1393240-3 2-1393240-4 2-1393240-5 3-1393240-3 3-1393240-5 3-1393240-6 3 Datasheet Rev. EK1 Issued 2005/11 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at schrackrelays.com in the ‘Schrack’ section. Specifications subject to change.