FAIRCHILD HCPL0731

HCPL0700, HCPL0701, HCPL0730, HCPL0731
Low Input Current High Gain Split Darlington Optocouplers
Single Channel: HCPL0700, HCPL0701, Dual Channel: HCPL0730, HCPL0731
Features
Description
■ Low input current: 0.5mA
The HCPL0700, HCPL0701, HCPL0730 and HCPL0731
optocouplers consist of an AlGaAs LED optically coupled
to a high gain split darlington photodetector housed in a
compact 8-pin small outline package. The HCPL0730
and HCPL0731 devices have two channels per package
for optimum mounting density.
■ Superior CTR: 2000%
■ Superior CMR – 10 kV/µs
■ CTR guaranteed 0°C to 70°C
■ U.L. Recognized (file# E90700)
■ VDE 0884 recognized (file# 136616)
The split darlington configuration separating the input
photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher
speed operation than possible with conventional darlington phototransistor optocoupler.
– approval pending for HCPL0730/0731
■ BSI recognized (file# 8661, 8662)
– HCPL0700/0701 only
Applications
The combination of a very low input current of 0.5mA
and a high current transfer ratio of 2000% makes this
family particularly useful for input interface to MOS,
CMOS, LSTTL and EIA RS232C, while output compatibility is ensured to CMOS as well as high fan-out TTL
requirements.
■ Digital logic ground isolation
■ Telephone ring detector
■ EIA-RS-232C line receiver
■ High common mode noise line receiver
■ µP bus isolation
■ Current loop receiver
Schematics
N/C 1
8 VCC
+ 1
8 VCC
V
F1
+ 2
7 VB
_ 2
7 V01
V
F
_
3
6 VO
_
3
6 V02
V
F2
N/C 4
5 GND
HCPL0700 / HCPL0701
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
Truth Table
LED
+ 4
5 GND
VO
ON
LOW
OFF
HIGH
HCPL0730 / HCPL0731
www.fairchildsemi.com
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
April 2009
Symbol
Parameter
Value
Units
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +85
°C
Reflow Temperature Profile (Refer to page 12)
EMITTER
IF (avg)
DC/Average Forward Input Current
20
mA
IF (pk)
Peak Forward Input Current (50% duty cycle, 1 ms P.W.)
40
mA
Peak Transient Input Current - (≤1 µs P.W., 300 pps)
IF (trans)
1.0
A
VR
Reverse Input Voltage
5
V
PD
Input Power Dissipation
35
mW
Average Output Current (Pin 6)
60
mA
DETECTOR
IO (avg)
VEBR
Emitter-Base Reverse Voltage
HCPL0700/HCPL0701
0.5
V
VCC, VO
Supply Voltage, Output Voltage
HCPL0700/HCPL0730
-0.5 to 7
V
HCPL0701/HCPL0731
-0.5 to 18
PD
Output power dissipation
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
100
mW
www.fairchildsemi.com
2
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Device
Min. Typ.* Max
Unit
EMITTER
VF
Input Forward
Voltage
IF = 1.6mA
TA = 25°C
HCPL0700/01
1.0
HCPL0730/31
1.25
BVR
V
1.35
All
Input Reverse
TA =25°C, IR = 10µA
Breakdown Voltage
1.7
1.75
All
5.0
DETECTOR
IOH
Logic High Output
Current
IF = 0mA, VO = VCC = 18V
HCPL0701/31
0.01
100
IF = 0mA, VO = VCC = 7V
HCPL0700/30
0.01
250
ICCL
Logic Low Supply
Current
IF = 1.6mA, VO = Open, VCC = 18V
HCPL0700/01
0.4
1.5
HCPL0730
0.8
3
HCPL0731
1
Logic High
Supply Current
IF = 0mA, VO = Open, VCC = 18V
IF1 = IF2 = 1.6mA, VCC = 7V
VO1 = VO2 = Open, VCC = 18V
ICCH
HCPL0700/01
µA
mA
10
IF1 = IF2 = 0, VCC = 7V
HCPL0730
0.001
VO1 = VO2 = Open, VCC = 18V
HCPL0731
0.01
µA
20
Transfer Characteristics
Symbol
CTR
VOL
Parameter
Test Conditions
COUPLED
IF = 0.5mA, VO = 0.4 V, VCC = 4.5V
Current Transfer
Ratio (Note 1, 2)
IF = 1.6mA,
VO = 0.4 V,
VCC = 4.5V
Logic Low Output
Voltage
IF = 0.5mA, IO = 2mA, VCC = 4.5V
IF = 1.6mA, IO = 8mA, VCC = 4.5V
Device
Min. Typ.* Max. Unit
HCPL0701/31
400
5000
HCPL0700
300
2600
HCPL0701
500
2600
HCPL0730
300
5000
HCPL0731
500
5000
HCPL0701
HCPL0731
0.4
V
0.4
IF = 5mA, IO = 15mA, VCC = 4.5V
0.4
IF = 12mA, IO = 24mA, VCC = 4.5V
0.4
IF = 1.6mA, IO = 4.8mA, VCC = 4.5V
%
HCPL0700/0730
0.4
Isolation Characteristics
Symbol
II-O
Characteristics
Test Conditions
Input-Output
Insulation Leakage Current
Relative humidity = 45%,
TA = 25°C, t = 5 s,
VI-O = 3000 VDC (Note 4)
VISO
Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C,
II-O ≤ 2µA, t = 1 min.
(Note 4, 5)
RI-O
Resistance (Input to Output)
VI-O = 500 VDC (Note 4)
Min.
Typ.*
2500
Max.
Unit
1.0
µA
VRMS
1012
Ω
*All typicals at TA = 25°C
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
3
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (TA = 0 to 70°C unless otherwise specified)
Switching Characteristics (VCC = 5V)
Symbol
TPHL
Parameter
Propagation Delay
Time to Logic Low
(Note 2) (Fig. 14)
Test Conditions
Device
RL = 4.7kΩ, IF = 0.5mA
TA = 25°C
RL = 270 Ω, IF = 12mA
TA = 25°C
RL = 2.2 kΩ, IF = 1.6mA
TA = 25°C
TPLH
Propagation Delay
Time to Logic High
(Note 2) (Fig. 14)
RL = 4.7 kΩ, IF = 0.5mA
Min.
Typ.*
Max.
Unit
HCPL0701
30
µs
HCPL0731
120
HCPL0701
3
25
HCPL0731
5
100
HCPL0701
2
HCPL0731
3
HCPL0701
0.3
1
HCPL0731
0.4
2
HCPL0700
15
HCPL0730/0731
25
HCPL0700
1
10
HCPL0730/0731
2
20
HCPL0701/31
TA = 25°C
RL = 270 Ω, IF = 12mA
TA = 25°C
RL = 2.2 kΩ, IF = 1.6mA
90
HCPL0701/31
12
HCPL0701
10
HCPL0731
15
HCPL0701
1.6
7
HCPL0731
1.6
10
HCPL0700/30/31
TA = 25°C
|CMH|
Common Mode
Transient
Immunity at
Logic High
IF = 0mA, |VCM| = 10 VP-P ,
TA = 25°C, RL = 2.2kΩ
(Note 3) (Fig. 15)
|CML|
Common Mode
Transient
Immunity at
Logic Low
IF = 1.6mA, |VCM| = 10 VP-P ,
TA = 25°C, RL = 2.2 kΩ
(Note 3) (Fig. 15)
µs
60
50
HCPL0700/30/31
7
35
ALL
1,000
10,000
V/µs
ALL
1,000
10,000
V/µs
*All typicals at TA = 25°C
Notes:
1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF,
times 100%.
2. Pin 7 open. Use of a resistor between pins 5 and 7 will decrease gain and delay time.
3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVCM/dt on the
leading edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic high state
(i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVCM/dt
on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state
(i.e., VO<0.8 V).
4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
5. 2500 VAC RMS for 1 minute duration is equivalent to 3000 VAC RMS for 1 second duration.
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
4
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Electrical Characteristics (TA = 0 to 70°C unless otherwise specified)
Fig. 1 Propagation Delay vs. Temperature
(HCPL0700, HCPL0701)
30
Fig. 2 Propagation Delay vs. Temperature
(HCPL0700, HCPL0701)
20
VCC = 5 V
IF = 0.5 mA
RL = 4.7 kΩ
1/f = 50 µs
18
tp - PROPAGATION DELAY (µs)
tp - PROPAGATION DELAY (µs)
35
tPLH
25
20
15
10
IF = 1.6 mA
VCC = 5 V
RL = 2.2 kΩ
1/f = 50 µs
16
14
tPLH
12
10
8
6
4
5
tPHL
tPHL
2
0
0
-60
-40
-20
0
20
40
60
80
-60
100
-40
-20
TA - TEMPERATURE (˚C)
Fig. 3 Propagation Delay vs. Temperature
(HCPL0700, HCPL0701)
20
40
60
80
100
Fig. 4 Logic High Output Current vs. Temperature
(HCPL0700, HCPL0701)
IF = 12 mA
VCC = 5 V
RL = 270 Ω
1/f = 50 µs
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
4
tp - PROPAGATION DELAY (µs)
0
TA - TEMPERATURE (˚C)
tPLH
3
2
1
tPHL
1000
VCC = VO = 5.5 V
100
10
1
0.1
0.01
0
-60
-40
-20
0
20
40
60
80
-40
100
TA - TEMPERATURE (˚C)
-20
0
20
40
60
80
100
TA - TEMPERATURE (˚C)
Fig. 5 Propagation Delay vs. Input Forward Currrent
(HCPL0730, HCPL0731)
Fig. 6 Output Current vs. Input Forward Current
(HCPL0700, HCPL0701)
100
20
VCC = 5V
IO - OUTPUT CURRENT (mA)
tp - PROPAGATION DELAY (µs)
TA = 25
16
t PLH
R L = 4.7kΩ
12
tPLH
R L = 2.2kΩ
8
4
10
TA = 85˚C
1
TA = 70˚C
TA = 25˚C
0.1
TA = 0˚C
t PHL
0.01
0.01
0
0
1
2
3
4
5
VCC = 5V
VO = 0.4V
TA = -40˚C
R L = 2.2kΩ or 4.7kΩ
6
7
8
9
10
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
0.1
1
10
IF - INPUT FORWARD CURRENT (mA)
TA - TEMPERATURE (˚C)
www.fairchildsemi.com
5
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves
Fig. 7 Input Forward Current vs. Forward Voltage
(HCPL0700, HCPL0701)
Fig. 8 Input Forward Current vs. Forward Voltage
(HCPL0730, HCPL0731)
100
100
IF - FORWARD CURRENT (mA)
IF - FORWARD CURRENT (mA)
TA = 85˚C
10
TA = 70˚C
1
0.1
TA = 25˚C
0.01
TA = 0˚C
10
TA = 85°C
TA = -40°C
TA = 70°C
1
TA = 25°C
TA = 0°C
0.1
0.01
TA = -40˚C
0.001
1.1
1.2
1.3
1.4
1.5
0.001
0.9
1.6
1.0
1.1
VF - FORWARD VOLTAGE (V)
ICC (PER CHANNEL) - SUPPLY CURRENT (mA)
ICCL - LOGIC LOW SUPPLY CURRENT (mA)
0.5
Logic Low Supply Current vs.
Input Forward Current
VCC = 18V
0.3
VCC = 5V
0.2
0.1
0.0
0.0
0.2
0.4
0.6
0.8
1.0
1.4
1.5
1.6
1.7
1.2
1.4
1.6
10
TA = 25°C
VCC = 18V
1.0
VCC = 7V
0.1
0.01
0.1
1
10
IF - INPUT FORWARD CURRENT (mA)
IF - INPUT FORWARD CURRENT (mA)
Fig. 11 DC Transfer Characteristics
(HCPL0700, HCPL0701)
Fig. 12 DC Transfer Characteristics
(HCPL0730, HCPL0731)
140
80
TA = 25°C
IF = 5.0mA
IF = 4.5mA
IF = 4.0mA
IF = 3.5mA
IF = 3.0mA
IF = 2.5mA
60
120
VCC= 5V
TA = 25˚C
40
IO - OUTPUT CURRENT (mA)
IO - OUTPUT CURRENT (mA)
1.3
Fig. 10 Supply Current vs. Input Forward Current
(HCPL0730, HCPL0731)
Fig. 9 Logic Low Supply Current vs. Input Forward Current
(HCPL0700, HCPL0701)
0.4
1.2
VF - FORWARD VOLTAGE (V)
IF = 2.0mA
IF = 1.5mA
IF = 1.0mA
20
IF = 0.5mA
V CC = 5V
I F = 5mA
I F = 4.5mA
100
4mA
3.5mA
80
3mA
2.5mA
60
2mA
40
1.5mA
1mA
20
0.5mA
0
0
1
0
0.0
2
VO - OUTPUT VOLTAGE (V)
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
VO - OUTPUT VOLTAGE (V)
www.fairchildsemi.com
6
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Typical Performance Curves (Continued)
Fig. 13 Current Transfer Ratio vs. Input Forward Current
(HCPL0700, HCPL0701)
CTR - CURRENT TRANSFER RATIO (%)
3500
3000
2500
VCC = 5V
VO = 0.4V
TA = 85°C
TA = 70°C
TA = 25°C
2000
1500
TA = 0°C
1000
TA = -40°C
500
0
0.1
1
10
IF - INPUT FORWARD CURRENT (mA)
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
7
Pulse
Generator
tr = 5ns
Z O = 50 V
Noise
Shield
1
8
IF
2
7
3
6
VC
CC
Pulse
Generator
tr = 5ns
Z O = 50 V
+5 V
VB
VO
5
-
2
7
6
+
C L = 15 pF*
Test Circuit for HCPL-0700 and HCPL-0701
+5 V
0.1 µF
V01
VO
C = 15 pF*
V02
VF2
Rm
GND
VCC
L
IF
MONITOR
0.1 µF
4
8
VF1
VO
I F Monitor
Rm
Noise
Shield
+
1
10% DUTY CYCLE
I/f < 100 µS
RL
VF
I/ f< 100µs
IF
4
5
GND
Test Circuit for HCPL-0730 and HCPL-0731
IF
5V
VO
1.5 V
1.5 V
VO
OL
TPHL
TPLH
Fig. 14 Switching Time T
Test Circuit
IF
1
Noise
Shield
8
VC
CC
+
+5 V
IF
2
7
VB
1
8
VCC
VF1
-
RL
+5 V
RL
2
7
3
6
4
5
V01
A
VF
A
B
Noise
Shield
3
6
B
VO
VO
VFFF
0.1 µF
VFF
4
5
+
GND
VF2
+
-
V02
VO
0.1 µF
GND
VC
CM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for HCPL-0700 and HCPL-0701
Test Circuit for HCPL-0730 and HCPL-0731
VCM
C 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : I F = 0 mA
VO
VOL
Switch at B : I F = 1.6 mA
Fig. 15 Common Mode Immunity Test
T
Circuit
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
8
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Test Circuits
8-pin SOIC Surface Mount
8
0.164 (4.16)
0.144 (3.66)
SEATING PLANE
1
0.202 (5.13)
0.182 (4.63)
0.010 (0.25)
0.006 (0.16)
0.143 (3.63)
0.123 (3.13)
0.021 (0.53)
0.011 (0.28)
0.008 (0.20)
0.003 (0.08)
0.244 (6.19)
0.224 (5.69)
0.050 (1.27) Typ.
Lead Coplanarity: 0.004 (0.10) MAX
Recommended Pad Layout
0.024 (0.61)
0.060 (1.52)
0.275 (6.99)
0.155 (3.94)
0.050 (1.27)
Dimensions in inches (mm).
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
9
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Package Dimensions
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Ordering Information
Option
Part Number Example
V
HCPL0700V
R2
HCPL0700R2
R2V
HCPL0700R2V
Description
VDE 0884
Tape and reel (2500 units per reel)
VDE 0884, Tape and reel (2500 units per reel)
Marking Information
1
700
V
X YY S
3
4
2
6
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code, e.g., ‘3’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
10
8.0 ± 0.10
2.0 ± 0.05
3.50 ± 0.20
0.30 MAX
Ø1.5 MIN
1.75 ± 0.10
4.0 ± 0.10
5.5 ± 0.05
8.3 ± 0.10
5.20 ± 0.20
0.1 MAX
6.40 ± 0.20
12.0 ± 0.3
Ø1.5 ± 0.1
User Direction of Feed
Dimensions in mm
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
11
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Carrier Tape Specification
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
Reflow Profile
Temperature (°C)
TP
260
240
TL
220
200
180
160
140
120
100
80
60
40
20
0
Max. Ramp-up Rate = 3°C/S
Max. Ramp-down Rate = 6°C/S
tP
Tsmax
tL
Preheat Area
Tsmin
ts
120
240
360
Time 25°C to Peak
Time (seconds)
Profile Freature
Pb-Free Assembly Profile
Temperature Min. (Tsmin)
150°C
Temperature Max. (Tsmax)
200°C
Time (tS) from (Tsmin to Tsmax)
60–120 seconds
Ramp-up Rate (tL to tP)
3°C/second max.
Liquidous Temperature (TL)
217°C
Time (tL) Maintained Above (TL)
60–150 seconds
Peak Body Package Temperature
260°C +0°C / –5°C
Time (tP) within 5°C of 260°C
30 seconds
Ramp-down Rate (TP to TL)
6°C/second max.
Time 25°C to Peak Temperature
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
8 minutes max.
www.fairchildsemi.com
12
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™*
™*
®
®
Fairchild
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
®
FAST
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
®
*
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40
©2003 Fairchild Semiconductor Corporation
HCPL0700, HCPL0701, HCPL0730, HCPL0731 Rev. 1.0.1
www.fairchildsemi.com
13
HCPL0700, HCPL0701, HCPL0730, HCPL0731 — Low Input Current High Gain Split Darlington Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.