LPE-5047 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped Custom Configurations Available ELECTRICAL SPECIFICATIONS (Multiple winds are connected in parallel) Inductance Range: 10 µH to 68 000 µH, measured at 0.10 V RMS at 10 kHz without DC current, using an HP 4263A or HP 4284A impedance analyzer DC Resistance Range: 0.03 Ω to 24.1 Ω, measured at + 25 °C ± 5 °C Rated Current Range: 2.29 amps to 0.07 amps Dielectric Withstanding Voltage: 500 V RMS, 60 Hz, 5 seconds DIMENSIONS in inches [millimeters] RoHS COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS Pad Layout 0.045 [1.14] Pad Dimensions Typical, 10 places MODEL Ungapped Models (A) LPE5047ER151NU LPE5047ER221NU LPE5047ER331NU LPE5047ER471NU LPE5047ER681NU LPE5047ER102NU LPE5047ER152NU LPE5047ER222NU LPE5047ER332NU LPE5047ER472NU LPE5047ER682NU LPE5047ER103NU LPE5047ER153NU LPE5047ER223NU LPE5047ER333NU LPE5047ER473NU LPE5047ER683NU Gapped Models (B) LPE5047ER100MG LPE5047ER150MG LPE5047ER220MG LPE5047ER330MG LPE5047ER470MG LPE5047ER680MG LPE5047ER101MG LPE5047ER151MG LPE5047ER221MG LPE5047ER331MG LPE5047ER471MG LPE5047ER681MG LPE5047ER102MG LPE5047ER152MG LPE5047ER222MG LPE5047ER332MG LPE5047ER472MG 0.079 [2.01] 0.045 [1.14] Typical 4 places 0.414 [10.52] 0.459 [11.66] Reference Only Dimensional Outline 5 6 0.472 [11.99] Max. 10 1 0.248 [6.30] Max. 0.525 [13.34] Max. 0.437 [11.10] 0.028 [0.71] 0.079 [2.01] Typ. 0.028 [0.71] Foot print Diagram IND. (µH) DCR MAX. RATED* SATURATING IND. SCHEMATIC MAX. DC CURRENT CURRENT** TOL. LETTER (Ohms) (Amps) (Amps) 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10 000 15 000 22 000 33 000 47 000 68 000 ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % A A A A A A A A A A A A A A A A A 0.20 0.24 0.29 0.35 0.42 0.51 0.63 0.76 1.00 2.24 2.70 3.27 6.26 7.58 9.50 18.5 24.1 0.79 0.72 0.65 0.59 0.54 0.49 0.44 0.40 0.35 0.24 0.21 0.19 0.14 0.13 0.11 0.08 0.07 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % B B B C D D D D E E E E E E E E E 0.03 0.04 0.05 0.09 0.13 0.15 0.24 0.37 0.55 0.85 1.29 1.96 2.38 3.66 5.47 8.48 13.2 2.29 2.07 1.68 1.35 1.11 1.01 0.81 0.65 0.53 0.43 0.35 0.28 0.26 0.21 0.17 0.14 0.11 2.690 2.230 1.860 1.540 1.300 1.085 0.900 0.740 0.610 0.500 0.420 0.350 0.290 0.240 0.195 0.160 0.135 * DC current that will create a maximum temperature rise of 30 °C when applied at + 25 °C ambient. ** DC current that will typically reduce the initial inductance by 20 % UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC to DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. NOTE: Pad layout guidelines per MIL-STD-275E (printed wiring for electronic equipment). Tolerances: xx ± 0.01" [± 0.25 mm]; xxx ± 0.005" [± 0.12 mm] The underside of these components contains metal and thus should not come in contact with active circuit traces. DESCRIPTION LPE 5047 1000 µH ± 30 % A ER e2 MODEL SIZE INDUCTANCE VALUE INDUCTANCE TOLERANCE CORE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER L P E PRODUCT FAMILY 5 0 4 SIZE 7 E R PACKAGE CODE 1 0 INDUCTANCE VALUE 2 N U TOL. CORE NOTE Series is also available with SnPb terminations by using package code RY for tape and reel (in place of ER) or SM for bulk (in place of EB). Document Number: 34065 Revision: 10-Oct-08 For technical questions, contact: [email protected] www.vishay.com 157 LPE-5047 Surface Mount Transformers/Inductors, Gapped and Ungapped Custom Configurations Available Vishay Dale SCHEMATIC (TOP VIEW) Schematic A Schematic C Schematic B Schematic D Schematic E 6 5 6 5 6 5 6 5 6 5 7 4 7 4 7 4 7 4 7 4 8 3 8 3 8 3 8 3 8 3 9 2 9 2 9 2 9 2 9 2 1 10 1 1 10 10 1 10 1 10 NOTE: Schematic A is for Ungapped LPE Series ENVIRONMENTAL PERFORMANCE TEST CONDITIONS Thermal Cycling Withstands - 55 °C to + 125 °C PART MARKING Operating Temperature - 55 °C to + 125 °C* - Vishay Dale High Humidity 85 % - Date code Soldering Heat Tested to + 230 °C - Marking code (Suffix of model #) Mechanical Shock Per MIL-STD-202, Method 213 (100G) - Pin 1 indicator Vibration Per MIL-STD-202, Method 204 (20G) Solderability Per industry standards * Must be checked in end use application PACKAGING TAPE SPECIFICATIONS: Carrier Tape Type: Conductive Cover Tape Type: Anti-static Cover Tape Adhesion to Carrier: 40 ± 30 grams STANDARDS: All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 “Taping of Surface Mount Components for Automatic Placement”. REEL SPECIFICATIONS: Diameter (flange): 13" [330.2 mm] Maximum Width (over flanges): 1.197" [30.4 mm] MODEL TAPE WIDTH COMPONENT PITCH UNITS PER 13 INCH REEL LPE-5047 24 mm 16 mm 600 Tape and Reel Orientation Pin 1 Indicator Cover Tape Carrier Tape USER DIRECTION OF FEED Label Area Embossed Cavity NOTE: Top view shown with cover tape removed www.vishay.com 158 For technical questions, contact: [email protected] Document Number: 34065 Revision: 10-Oct-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000