FAIRCHILD DM74LS158N

Revised April 2000
DM74LS157 • DM74LS158
Quad 2-Line to 1-Line Data Selectors/Multiplexers
General Description
Applications
These data selectors/multiplexers contain inverters and
drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word
is selected from one of two sources and is routed to the
four outputs. The DM74LS157 presents true data whereas
the DM74LS158 presents inverted data to minimize propagation delay time.
• Expand any data input point
• Multiplex dual data buses
• Generate four functions of two variables
(one variable is common)
• Source programmable counters
Features
■ Buffered inputs and outputs
■ Typical Propagation Time
DM74LS157
9 ns
DM74LS158
7 ns
■ Typical Power Dissipation
DM74LS157
49 mW
DM74LS158
24 mW
Ordering Code:
Order Number
Package Number
Package Description
DM74LS157M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74LS157SJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
DM74LS157N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
DM74LS158M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74LS158N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagrams
DM74LS157
© 2000 Fairchild Semiconductor Corporation
DM74LS158
DS006396
www.fairchildsemi.com
DM74LS157 • DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers
September 1986
DM74LS157 • DM74LS158
Function Table
Inputs
Output Y
Strobe
Select
A
B
DM74LS157 DM74LS158
H
X
X
X
L
H
L
L
L
X
L
H
L
L
H
X
H
L
L
H
X
L
L
H
L
H
X
H
H
L
H = HIGH Level
L = LOW Level
X = Don’t Care
Logic Diagrams
DM74LS157
www.fairchildsemi.com
DM74LS158
2
Supply Voltage
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
7V
Input Voltage
7V
0°C to +70°C
Operating Free Air Temperature Range
−65°C to +150°C
Storage Temperature Range
DM74LS157 Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
4.75
5
5.25
Units
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
V
VIL
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−0.4
mA
IOL
LOW Level Output Current
8
mA
TA
Free Air Operating Temperature
70
°C
2
V
0
DM74LS157 Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Conditions
Min
VI
Input Clamp Voltage
VCC = Min, II = −18 mA
VOH
HIGH Level Output Voltage
VCC = Min, IOH = Max, VIL = Max, VIH = Min
VOL
II
IIH
IIL
Typ
(Note 2)
Max
−1.5
2.7
3.4
LOW Level
VCC = Min, IOL = Max, VIL = Max, VIH = Min
0.35
0.5
IOL = 4 mA, VCC = Min
0.25
0.4
Input Current @ Max
VCC = Max
S or G
0.2
Input Voltage
VI = 7V
A or B
0.1
HIGH Level
VCC = Max
S or G
40
Input Current
VI = 2.7V
A or B
20
LOW Level
VCC = Max
S or G
−0.8
Input Current
VI = 0.4V
A or B
−0.4
Short Circuit Output Current
VCC = Max (Note 3)
ICC
Supply Current
VCC = Max (Note 4)
−20
9.7
V
V
Output Voltage
IOS
Units
V
mA
µA
mA
−100
mA
16
mA
Note 2: All typicals are at VCC = 5V, TA = 25°C.
Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Note 4: ICC is measured with 4.5V applied to all inputs and all outputs OPEN.
DM74LS157 Switching Characteristics
at VCC = 5V and TA = 25°C
RL = 2 kΩ
From (Input)
Symbol
Parameter
To (Output)
CL = 15 pF
Min
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
Max
CL = 50 pF
Min
Units
Max
Data to Y
14
18
ns
Data to Y
14
23
ns
Strobe to Y
20
24
ns
Strobe to Y
21
30
ns
Select to Y
23
28
ns
Select to Y
27
32
ns
3
www.fairchildsemi.com
DM74LS157 • DM74LS158
Absolute Maximum Ratings(Note 1)
DM74LS157 • DM74LS158
DM74LS158 Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
4.75
5
5.25
Units
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
V
VIL
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−0.4
mA
IOL
LOW Level Output Current
8
mA
TA
Free Air Operating Temperature
70
°C
2
V
0
DM74LS158 Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Conditions
VI
Input Clamp Voltage
VCC = Min, II = −18 mA
VOH
HIGH Level
VCC = Min, IOH = Max
Output Voltage
VIL = Max, VIH = Min
VOL
LOW Level
VCC = Min, IOL = Max
Output Voltage
VIL = Max, VIH = Min
Min
2.7
IOL = 4 mA, VCC = Min
II
IIH
Typ
(Note 5)
Max
Units
−1.5
V
3.4
V
0.35
0.5
0.25
0.4
Input Current @ Max
VCC = Max
S or G
0.2
Input Voltage
VI = 7V
A or B
0.1
HIGH Level
VCC = Max
S or G
40
Input Current
VI = 2.7V
A or B
20
LOW Level
VCC = Max
S or G
−0.8
Input Current
VI = 0.4V
A or B
−0.4
IOS
Short Circuit Output Current
VCC = Max (Note 6)
ICC
Supply Current
VCC = Max (Note 7)
IIL
−20
V
mA
µA
mA
−100
mA
8
mA
4.8
Note 5: All typicals are at VCC = 5V, TA = 25°C.
Note 6: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Note 7: ICC is measured with 4.5V applied to all inputs and all outputs OPEN.
DM74LS158 Switching Characteristics
at VCC = 5V and TA = 25°C
RL = 2 kΩ
From (Input)
Symbol
Parameter
To (Output)
CL = 15 pF
Min
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
www.fairchildsemi.com
Max
CL = 50 pF
Min
Units
Max
Data to Y
12
18
ns
Data to Y
12
21
ns
Strobe to Y
17
23
ns
Strobe to Y
18
28
ns
Select to Y
20
24
ns
Select to Y
24
36
ns
4
DM74LS157 • DM74LS158
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
Package Number M16A
5
www.fairchildsemi.com
DM74LS157 • DM74LS158
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M16D
www.fairchildsemi.com
6
DM74LS157 • DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N16E
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com