MAPDCT0013 2 Way 0º Power Divider 5 to 1000 MHz M/A-COM Products Released, Rev. V1 Schematic with off-chip components Features • • • • • Surface mount 2 Way 0 degree. 260°C reflow compatible RoHS* compliant Available on tape and reel. Description M/A Com’s MAPDCT0013 is a 2 way 0 degree RF power divider in a low cost, surface mount package. Ideally suited for high volume CATV/broadband applications. Two 0603 0.5pF capacitors and one 160Ω resistor are required with this part. Case style: SM-156 Pin configuration Pin no. Function 1 Ground 2 External 0.5pF Capacitor to ground 3 Output 2 4 Output 1 5 External 0.5pF Capacitor to ground 6 Input Ordering information 1 Part number Description MAPDCT0013TR Reel quantity 2000 MAPD-007999-CT13TB Customer Test Board Unless otherwise stated dimensions are in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Pin’s 2 and 5 need to be connected together on the PCB as shown above. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. Note: Reference Application Note M513 for reel size information. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0013 2 Way 0º Power Divider 5 to 1000 MHz M/A-COM Products Released, Rev. V1 Electrical specifications: TA = 25°C, Z0 = 75Ω Frequency Range Test Conditions Units Nominal Max Insertion Loss 1 Pin 6 to 4 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHZ dB dB dB 0.2 0.7 1.15 0.6 1.3 1.6 Insertion Loss 2 Pin 6 to 3 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHZ dB dB dB 0.25 0.6 1.3 0.6 1.3 2.1 Amplitude Balance 5 – 870 MHz 870 – 1000 MHz dB dB 0.2 0.15 ±0.5 ±0.65 Phase Balance 5 – 870 MHz 870 – 1000 MHz 0 0 1.5 1.5 ±2.4 ±4.2 Input Return Loss 5 – 400 MHz 400 – 820 MHz 820 – 1000 MHz dB dB dB 36 32 25 24 20 15 Isolation 5 – 300 MHz 300 – 870 MHz 870 – 1000 MHz dB dB dB 33 20 18 25 16 15 Output Return Loss 1 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHz dB dB dB 28 19.3 14.8 20 14.5 11.3 Output Return Loss 2 5 – 500 MHz 500 – 870 MHz 870 – 1000 MHz dB dB dB 27 21 14.5 20 14.5 11.3 Absolute maximum ratings¹ ² Parameter Absolute maximum Max input power 1W Internal Load Dissipation 0.125W Operating temperature -40°C to +85°C Storage temperature -40°C to +100°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPDCT0013 2 Way 0º Power Divider 5 to 1000 MHz M/A-COM Products Released, Rev. V1 Typical performance curves: TA = 25°C, Z0 = 75Ω Insertion loss 2: pin 6 to pin 3 0.0 0.0 -0.5 -0.5 dB dB Insertion loss 1: pin 6 to pin 4 -1.0 -1.0 -1.5 -1.5 -2.0 -2.0 5 204 403 602 801 5 1000 204 Amplitude balance 801 1000 801 1000 801 1000 Phase balance 3 0.3 0.2 0.1 2 Degrees dB 602 Frequency (MHz) Frequency (MHz) 0.0 -0.1 -0.2 -0.3 1 0 -1 -2 5 204 403 602 801 -3 1000 5 204 Frequency (MHz) 403 602 Frequency (MHz) Return loss: Input Return loss: Output (1 and 2) 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 0 -5 -10 dB dB 403 -15 -20 -25 -30 -35 5 204 403 602 Frequency (MHz) 801 1000 5 204 403 602 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.