New Product USB260 Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ideal for automated placement • Ultrafast recovery times for high efficiency • Low forward voltage, low power losses • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s DO-214AA (SMB) • Component in accordance to RoHS 2002/95/EC and WEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 600 V IFSM 90 A trr 30 ns VF 1.0 V TJ max. 150 °C MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETERS SYMBOL USB260 Device marking code UNIT U60 Maximum repetitive peak reverse voltage VRRM 600 V Maximum RMS voltage VRMS 420 V Maximum DC blocking voltage VDC 600 V Maximum average forward rectified current (Fig. 1) IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 90 A Non-repetitive avalanche energy at IAS = 2.0 A, L = 10 mH, TJ = 25 °C EAS 20 mJ TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range Document Number: 84705 Revision: 13-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product USB260 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETERS TEST CONDITIONS Breakdown voltage Instantaneous forward voltage (1) Maximum reverse current (2) IR = 10 µA TJ = 25 °C IF = 1 A TJ = 25 °C IF = 2.0 A TJ = 25 °C TJ = 125 °C VR = 600 V TJ = 25 °C TJ = 125 °C SYMBOL TYP. VBR MAX. UNIT 600 (minimum) VF V 1.25 - 1.5 1.0 1.6 1.1 30 5.0 100 V µA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 30 ns Typical junction capacitance 4.0 V, 1 MHz CJ 45 pF SYMBOL USB260 UNIT RθJA RθJL 45 10 °C/W Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETERS Typical thermal resistance (1) Note: (1) Units mounted on P.C.B. with 2.0 x 2.0" copper pad areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE USB260-E3/52T 0.096 52T 750 7" diameter plastic tape and reel USB260-E3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel USB260HE3/52T (1) 0.096 52T 750 7" diameter plastic tape and reel USB260HE3/5BT (1) 0.096 5BT 3200 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 84705 Revision: 13-May-08 New Product USB260 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Forward Current (A) Average Forward Rectified Current (A) 3.0 2.0 1.0 P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 90 100 110 120 140 1 TJ = 25 °C 0.1 150 1.1 1.6 2.1 2.6 3.1 3.6 Figure 1. Maximum Forward Current Derating Curve Figure 4. Typical Instantaneous Forward Characteristics 3.0 1000 D = 0.8 D = 0.3 D = 0.2 D = 1.0 2.0 D = 0.1 1.5 T 1.0 0.5 D = tp/T tp Instantaneous Reverse Current (µA) Instantaneous Forward Voltage (V) 2.5 0 TJ = 150 °C 100 TJ = 125 °C 10 1 TJ = 25 °C 0.1 0.01 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 20 30 40 50 60 70 80 90 100 Average Forward Current (A) Percent of Rated Peak Reverse Voltage (%) Figure 2. Forward Power Loss Characteristics Figure 5. Typical Reverse Leakage Characteristics 1000 Junction Capacitance (pF) 100 Peak Forward Surge Current (A) 0.6 Lead Temperature (°C) D = 0.5 Average Power Loss (W) 130 TJ = 125 °C 10 0.01 0.1 0 80 TJ = 150 °C 80 60 40 20 0 1 10 100 100 10 1 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 3. Maximum Non-Repetitive Peak Forward Surge Current Figure 6. Typical Junction Capacitance Document Number: 84705 Revision: 13-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product USB260 Vishay General Semiconductor Transient Thermal Impedance (°C/W) 100 10 1 0.01 0.1 1 10 100 t - Pulse Duration (s) Figure 7. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 84705 Revision: 13-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1