Low Cost GMIC SMT Quad Hybrid — 800 - 905 MHz QH01-0016 QH01-0016 …………………………………………………………………………………… Low Cost GMIC SMT Quad Hybrid Features • • • • • SOT-26 Small Size and Low Profile Industry Standard SOT-26 SMT Plastic Package Typical Insertion Loss 0.7dB Typical Amplitude Balance 0.3dB 1 Watt Power Handling Description M/A-COM’s QH01-0016 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-26 plastic package. This Quad Hybrid is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low cost are required. Typical applications include base station switching networks and other c cellular applications where size and PCB real estate are at a premium. Available in Tape and Reel. The QH01-0016 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Absolute Maximum Ratings1 Parameter Ordering Information Part Number Absolute Maximum Package 2 1 W CW Operating Temperature -40°C to +85°C QH01-0016-TR Forward Tape and Reel1 Storage Temperature -65°C to +150°C QH01-0016-RTR Reverse Tape and Reel1 Input Power 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W Maximum. QH01-0016 SOT-26 Lead Plastic Package 1. If specific reel size is required, consult factory for part number assignment. Typical Electrical Specifications1, TA = +25°C Units Min Typ Max Insertion Loss above 3.0dB Parameter dB — 0.7 1.2 Isolation dB 14 17 — — — — — 1.3 : 1 1.35 : 1 1.5 : 1 1.5 : 1 dB — 0.3 0.9 ° — 1.5 6 VSWR Input RF1, RF2 Outputs Amplitude Balance Phase Balance 1. All specifications apply with a 50-Ohm source and load impedance. S1523A M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V2.00 Low Cost GMIC SMT Quad Hybrid — 800 - 905 MHz Functional Diagram QH01-0016 Recommended PCB Configuration Typical Performance @ +25°C 0.0 -0.2 dB -0.4 -0.6 -0.8 -1.0 -1.2 800.0 820.0 840.0 860.0 880.0 900.0 Frequency (MHz) 1.6 1.0 0.8 1.5 0.6 0.4 O/P VSWR 1.4 dB 0.2 1.3 0.0 -0.2 I/P VSWR 1.2 -0.4 -0.6 1.1 -0.8 -1.0 800.0 820.0 840.0 860.0 880.0 1.0 800.0 900.0 820.0 840.0 860.0 880.0 900.0 Frequency (MHz) Frequency (MHz) 93.0 -10.0 92.0 -12.0 91.0 dB Deg -14.0 90.0 -16.0 89.0 -18.0 -20.0 800.0 88.0 820.0 840.0 860.0 880.0 900.0 Frequency (MHz) 87.0 800.0 820.0 840.0 860.0 880.0 900.0 Frequency (MHz) S1523A M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. V2.00