DS54-0001 Low Cost Four-Way SMT Power Splitter/Combiner, 824-960 MHz Features • • • • • • • SOW-16 Small Size and Low Profile Industry Standard SOW-16 SMT Plastic Package Excellent Repeatability (Lot-to-Lot Variation) Typical Isolation: 23 dB Typical Amplitude Balance: 0.3 dB Low Cost Typical Insertion Loss: 1.0dB Description M/A-COM’s DS54-0001is an IC-based monolithic power splitter/combiner in a low cost SOW-16 plastic package. This device is ideally suited for applications where PCB real estate is at a premium and standard packaging for automated assembly and low cost are critical. Typical applications include infrastructure, portables and peripheral devices (PCMCIA cards) for wireless standards such as GSM, AMPS, CDPD, RAM and ARDIS. Available in tape and reel. The DS54-0001 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Ordering Information Part Number DS54-0001 Package SOW-16 Lead Plastic Package DS54-0001-TR Forward Tape and Reel1 DS54-0001-RTR Reverse Tape and Reel1 1. If specific reel size is required, consult factory for part number assignment. Typical Electrical Specifications1, TA = +25°C Parameter Insertion Loss Above 6.0dB Isolation VSWR Input VSWR Output Amplitude Balance Phase Balance Units Min Typ Max dB — 1.0 1.2 dB 18 23 — — — 1.2:1 1.4:1 — dB — — 1.4:1 0.3 1.75:1 0.7 ° — 2 4 1. All specifications apply with a 50-Ohm source and load impedance. Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 2.0 1 Low Cost Four-Way SMT Power Splitter/Combiner, 824-960 MHz Functional Diagram 1 Absolute Maximum Ratings1 Parameter Input Power² DS54-0001 Absolute Maximum 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding these limits may cause permanent damage. 2. With Internal load dissipation of 0.125 W maximum. Recommended PCB Configuration (Dimensions in Inches) 1. Pins 1, 2, 4, 6, 7, 8, 9, 10, 11, 13, 15 and 16 must be RF and DC grounded. Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 2.0 2