VISHAY 135D336X0015C2

135D
Vishay
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
FEATURES
• Terminations: standard tin/lead (SnPb),
100 % Tin (RoHS compliant) available
• Standard and extended ratings
Pb-free
Available
RoHS*
• Model
135D
tantalum-case
electrolytic COMPLIANT
capacitors incorporate the advantages of all the
varieties of electrolytic capacitors and eliminate most of the
disadvantages. These units have a 3 volt reverse voltage
capability at + 85 °C and a higher ripple current capability
than any other electrolytic type with similar combinations of
capacitance and case size.
• Designed for the aerospace applications, this capacitor
was developed under partial sponsorship of the Marshall
Space Flight Center, National Aeronautics and Space
Administration. The capacitors have a high resistance to
damage from shock and vibration. Extended range ratings
and high temperature designs areavailable.
• Model 135D capacitors are commercial equivalents of
Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style;
TLT, TXT, THT, THX and Military Style CLR79 and CLR81,
designed to meet the performance requirements of Military
Specification MIL-PRF-39006/22/25. Capacitors to meet
MILPRF- 39006/22/25 should be ordered by part numbers
shown in that specification.
PERFORMANCE CHARACTERISTICS
Life Test: Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
Operating Temperature: - 55 °C to + 85 °C.
(To + 200 °C with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
Following life test:
1. DCL, measured at + 85 °C rated voltage, shall not be in
excess of the original requirement.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
ORDERING INFORMATION
135D
306
X0
006
C
2
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE CODE
STYLE NUMBER
RoHS COMPLIANT
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an “R”
(6R3 = 6.3 V)
See Ratings
and
Case Codes
Table
Standard
0 = No outer tube.
2 = Outer polyesterfilm
insulation.
E3 = 100 % tin
termination (RoHS
compliant design)
Blank = SnPb
termination
(standard design)
High Temperature
8 = No outer tube.
6 = High temperature film
insulation (above + 125 °C)
Note
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to
the unit weight.
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
42
For technical questions, contact: [email protected]
Document Number: 40024
Revision: 10-Oct-08
135D
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
Vishay
DIMENSIONS in inches [millimeters]
E
L1
0.0253 ± 0.002 [0.64 ± 0.05] DIA.
(NO. 22 AWG TINNED NICKEL LEADS)
SOLDERABLE AND WELDABLE
CASE CODE
TYPE DCLR 79/81
135D
EQUIV.
C
T1
F
T2
T
T3
K
T4
L2
D
E
WELD
TANTALUM
D
L1
L2
(Max.)
E
0.188 ± 0.016
[4.78 ± 0.41]
0.281 ± 0.016
[7.14 ± 0.41]
0.375 ± 0.016
[9.53 ± 0.41]
0.375 ± 0.016
[9.53 ± 0.41]
0.453 + 0.031 - 0.016
[11.51 + 0.79 - 0.41]
0.641 + 0.031 - 0.016
[16.28 + 0.79 - 0.41]
0.766 + 0.031 - 0.016
[19.46 + 0.79 - 0.41]
1.062 + 0.031 - 0.016
[26.97 + 0.79 - 0.41]
0.734
[18.64]
0.922
[23.42]
1.047
[26.59]
1.343
[34.11]
1.500 ± 0.250
[38.10 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
WEIGHT
(g)
(Max.)
2.6
6.2
11.6
17.7
Note
*For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.
STANDARD RATINGS
CAPACITANCE CASE
(µF)
CODE
30
68
140
270
330
560
1200
C
C
F
F
T
T
K
25
56
120
220
290
430
850
C
C
F
F
T
T
K
20
47
100
180
250
390
750
C
C
F
F
T
T
K
15
33
70
120
170
270
540
C
C
F
F
T
T
K
MAX. DCL (µA)
MAX. CAPACITANCE CHANGE
at
(%) at
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C. . . 3.6 WVDC at + 200 °C
135D306X0006C2
4.0
100
1.0
2.0
- 40
+ 10.5
+ 12
135D686X0006C2
3.2
60
1.0
2.0
- 40
+ 14
+ 16
135D147X0006F2
2.0
40
1.0
3.0
- 40
+ 14
+ 16
135D277X0006F2
2.2
25
1.0
6.5
- 44
+ 17.5
+ 20
135D337X0006T2
1.4
20
2.0
7.9
- 44
+ 14
+ 16
135D567X0006T2
1.3
25
2.0
13.0
- 64
+ 17.5
+ 20
135D128X0006K2
1.0
20
3.0
14.0
- 80
+ 25
+ 25
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . 4.8 WVDC at + 200 °C
135D256X0008C2
4.0
100
1.0
2.0
- 40
+ 10.5
+ 12
135D566X0008C2
3.3
59
1.0
2.0
- 40
+ 14
+ 16
135D127X0008F2
2.6
50
1.0
2.0
- 44
+ 17.5
+ 20
135D227X0008F2
2.4
30
1.0
7.0
- 44
+ 17.5
+ 20
135D297X0008T2
1.8
25
2.0
6.0
- 64
+ 17.5
+ 20
135D437X0008T2
1.4
25
2.0
14.0
- 64
+ 17.5
+ 20
135D857X0008K2
1.0
22
4.0
16.0
- 80
+ 25
+ 25
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C
135D206X0010C2
4.0
120
1.0
2.0
- 32
+ 10.5
+ 12
135D476X0010C2
3.7
90
1.0
2.0
- 36
+ 14
+ 16
135D107X0010F2
2.4
60
1.0
4.0
- 36
+ 14
+ 16
135D187X0010F2
2.2
40
1.0
7.0
- 36
+ 14
+ 16
135D257X0010T2
1.8
30
2.0
10.0
- 40
+ 14
+ 16
135D397X0010T2
1.5
25
2.0
16.0
- 64
+ 17.5
+ 20
135D757X0010K2
1.0
23
4.0
16.0
- 80
+ 25
+ 25
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C
135D156X0015C2
4.4
155
1.0
2.0
- 24
+ 10.5
+ 12
135D336X0015C2
4.0
90
1.0
2.0
- 28
+ 14
+ 16
135D706X0015F2
2.8
75
1.0
4.0
- 28
+ 14
+ 16
135D127X0015F2
2.6
50
1.0
7.0
- 28
+ 17.5
+ 20
135D177X0015T2
2.4
35
2.0
10.0
- 32
+ 14
+ 16
135D277X0015T2
2.2
30
2.0
16.0
- 56
+ 17.5
+ 20
135D547X0015K2
1.0
23
6.0
24.0
- 80
+ 25
+ 25
PART NUMBER*
MAX. ESR MAX. IMP.
at
at
+ 25 °C
- 55 °C
120 Hz
120 Hz
MAX.
RIPPLE
40 kHz
Irms
820
960
1200
1375
1800
1900
2265
820
900
1230
1370
1770
1825
2330
820
855
1200
1365
1720
1800
2360
780
820
1150
1450
1480
1740
2330
Note
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
Document Number: 40024
Revision: 10-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
43
135D
Vishay
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
STANDARD RATINGS
CAPACITANCE CASE
(µF)
CODE
10
22
50
100
120
180
350
C
C
F
F
T
T
K
8
15
40
68
100
150
300
C
C
F
F
T
T
K
15
68
270
C
F
K
5
10
25
47
60
82
160
C
C
F
F
T
T
K
4
8.2
20
39
50
68
140
C
C
F
F
T
T
K
3.5
6.8
15
33
40
56
110
C
C
F
F
T
T
K
2.5
4.7
11
22
25
30
43
56
86
C
C
F
F
T
T
T
K
K
MAX. DCL (µA)
MAX. CAPACITANCE CHANGE
at
(%) at
+
85
°C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C
135D106X0025C2
5.3
220
1.0
2.0
- 16
+8
+9
135D226X0025C2
4.2
140
1.0
2.0
- 20
+ 10.5
+ 12
135D506X0025F2
3.0
70
1.0
2.0
- 28
+ 13
+ 15
135D107X0025F2
2.8
50
1.0
10.0
- 28
+ 13
+ 15
135D127X0025T2
2.6
38
2.0
6.0
- 32
+ 13
+ 15
135D187X0025T2
2.2
32
2.0
18.0
- 48
+ 13
+ 15
135D357X0025K2
1.3
24
7.0
28.0
- 70
+ 25
+ 25
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C . . . 18 WVDC at + 200 °C
135D805X0030C2
6.6
275
1.0
2.0
- 16
+8
+ 12
135D156X0030C2
6.2
175
1.0
2.0
- 20
+ 10.5
+ 12
135D406X0030F2
4.0
65
1.0
5.0
- 24
+ 10.5
+ 12
135D686X0030F2
2.9
60
1.0
8.0
- 24
+ 13
+ 15
135D107X0030T2
2.7
40
2.0
12.0
- 28
+ 10.5
+ 12
135D157X0030T2
2.3
35
2.0
18.0
- 48
+ 13
+ 15
135D307X0030K2
1.4
25
8.0
32.0
- 60
+ 25
+ 25
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C
135D156X0035C2
6.2
175
0.75
1.5
- 20
+ 10.5
+ 12
135D686X0035F2
2.9
60
1.0
2.0
- 24
+ 13
+ 15
135D277X0035K2
1.4
26
3.0
12.0
- 58
+ 25
+ 25
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C
135D505X0050C2
8.0
400
1.0
2.0
- 16
+5
+6
135D106X0050C2
6.4
250
1.0
2.0
- 24
+8
+9
135D256X0050F2
4.6
95
1.0
5.0
- 20
+ 10.5
+ 12
135D476X0050F2
3.7
70
1.0
9.0
- 28
+ 13
+ 15
135D606X0050T2
2.9
45
2.0
12.0
- 16
+ 10.5
+ 12
135D826X0050T2
2.5
45
2.0
16.0
- 32
+ 13
+ 15
135D167X0050K2
1.5
27
8.0
32.0
- 50
+ 25
+ 25
60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C . . . 36 WVDC at + 200 °C
135D405X0060C2
9.3
550
1.0
2.0
- 16
+5
+6
135D825X0060C2
6.6
275
1.0
2.0
- 24
+8
+9
135D206X0060F2
4.7
105
1.0
5.0
- 16
+8
+9
135D396X0060F2
3.4
90
1.0
9.0
- 28
+ 10.5
+ 15
135D506X0060T2
2.9
50
2.0
12.0
- 16
+ 10.5
+ 12
135D686X0060T2
2.5
50
2.0
16.0
- 32
+ 10.5
+ 15
135D147X0060K2
1.5
28
8.0
32.0
- 40
+ 20
+ 20
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . 45 WVDC at + 200 °C
135D355X0075C2
9.5
650
1.0
2.0
- 16
+5
+6
135D685X0075C2
6.8
300
1.0
2.0
- 20
+8
+9
135D156X0075F2
5.3
150
1.0
5.0
- 16
+8
+9
135D336X0075F2
4.2
90
1.0
10.0
- 24
+ 10.5
+ 15
135D406X0075T2
3.0
60
2.0
12.0
- 16
+ 10.5
+ 12
135D566X0075T2
2.6
60
2.0
17.0
- 28
+ 10.5
+ 15
135D117X0075K2
1.5
29
9.0
36 .0
- 35
+ 20
+ 20
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C
135D255X0100C2
10.6
950
1.0
2.0
- 16
+7
+8
135D475X0100C2
8.5
500
1.0
2.0
- 16
+7
+8
135D116X0100F2
6.0
200
1.0
4.0
- 16
+7
+8
135D226X0100F2
4.8
100
1.0
9.0
- 16
+7
+8
135D256X0125T2
3.2
93
2.0
13.0
- 16
+7
+8
135D306X0100T2
3.3
80
2.0
12.0
- 16
+7
+8
135D436X0100T2
2.6
70
2.0
17.0
- 20
+7
+8
135D566X0125K2
1.6
32
10.0
40.0
- 25
+ 15
+ 15
135D866X0100K2
1.6
30
9.0
36.0
- 25
+ 15
+ 15
PART NUMBER*
MAX. ESR MAX. IMP.
at
at
+ 25 °C
- 55 °C
120 Hz
120 Hz
MAX.
RIPPLE
40 kHz
rms
715
800
1130
1435
1450
1525
1970
640
780
1120
1285
1450
1525
1950
660
1195
1950
580
715
1005
1155
1335
1400
1900
525
625
930
1110
1330
1365
1850
525
610
890
1000
1250
1335
1850
505
565
835
965
1200
1240
1335
1800
1800
Note
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
www.vishay.com
44
For technical questions, contact: [email protected]
Document Number: 40024
Revision: 10-Oct-08
135D
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
Vishay
STANDARD RATINGS
CAPACITANCE CASE
(µF)
CODE
1.7
3.6
9
14
18
C
C
F
F
T
MAX. ESR MAX. IMP.
at
at
+ 25 °C
- 55 °C
120 Hz
120 Hz
MAX. DCL (µA)
MAX. CAPACITANCE CHANGE
at
(%) at
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
+ 125 °C
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C
135D175X0125C2
15.6
1250
1.0
2.0
- 16
+7
+8
135D365X0125C2
10.0
600
1.0
2.0
- 16
+7
+8
135D905X0125F2
7.4
240
1.0
5.0
- 16
+7
+8
135D146X0125F2
5.7
167
1.0
7.0
- 16
+7
+8
135D186X0125T2
3.7
129
2.0
9.0
- 16
+7
+8
PART NUMBER*
MAX.
RIPPLE
40 kHz
rms
415
520
755
860
1130
Note
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
EXTENDED RATINGS
CAPACITANCE CASE
(µF)
CODE
220
560
820
1200
1500
2200
C
F
F
T
T
K
180
680
1500
1800
C
F
T
K
120
150
390
560
1200
1500
C
C
F
F
T
K
82
100
270
390
680
820
1000
C
C
F
F
T
T
K
56
68
180
270
470
560
680
C
C
F
F
T
T
K
MAX. ESR MAX. IMP.
MAX. DCL (µA)
MAX.. CAPACITANCE
at
at
at
CHANGE (%) at
+ 25 °C
- 55 °C
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
120 Hz
120 Hz
+ 125 °C
6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C . . . 3.6 WVDC at + 200 °C
135D227X0006C2
3.0
36
2
9
- 64
+ 13
+ 16
135D567X0006F2
2.5
21
3
9
- 77
+ 16
+ 20
135D827X0006F2
2.5
18
3
14
- 88
+ 16
+ 20
135D128X0006T2
1.5
18
5
18
- 88
+ 20
+ 25
135D158X0006T2
1.5
18
5
20
- 90
+ 20
+ 25
135D228X0006K2
1.0
13
6
24
- 90
+ 25
+ 30
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . 4.8 WVDC at + 200 °C
135D187X0008C2
3.0
45
2
9
- 60
+ 13
+ 16
135D687X0008F2
2.5
22
3
14
- 83
+ 16
+ 20
135D158X0008T2
1.5
18
5
20
- 90
+ 20
+ 25
135D188X0008K2
1.0
14
7
25
- 90
+ 25
+ 30
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C
135D127X0010C2
3.2
54
2
6
- 40
+ 14
+ 16
135D157X0010C2
3.0
54
2
9
- 55
+ 13
+ 16
135D397X0010F2
2.5
27
3
9
- 66
+ 16
+ 20
135D567X0010F2
2.5
27
3
16
- 77
+ 16
+ 20
135D128X0010T2
1.5
18
5
20
- 88
+ 20
+ 25
135D158X0010K2
1.0
15
7
25
- 88
+ 25
+ 30
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C
135D826X0015C2
3.9
72
2
6
- 35
+ 12
+ 16
135D107X0015C2
3.9
72
2
9
- 44
+ 13
+ 16
135D277X0015F2
2.5
31
3
9
- 62
+ 16
+ 15
135D397X0015F2
2.5
31
3
16
- 66
+ 16
+ 20
135D687X0015T2
1.8
22
6
18
- 74
+ 20
+ 25
135D827X0015T2
1.8
22
6
24
- 77
+ 20
+ 25
135D108X0015K2
1.2
17
8
32
- 77
+ 25
+ 30
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C
135D566X0025C2
4.3
90
2
6
- 25
+ 12
+ 15
135D686X0025C2
4.3
90
2
9
- 40
+ 12
+ 15
135D187X0025F2
2.7
33
3
9
- 54
+ 13
+ 15
135D277X0025F2
2.7
33
3
16
- 62
+ 13
+ 16
135D477X0025T2
1.8
24
6
18
- 65
+ 18
+ 25
135D567X0025T2
1.8
24
7
28
- 72
+ 20
+ 25
135D687X0025K2
1.2
19
8
32
- 72
+ 25
+ 30
PART NUMBER*
MAX.
RIPPLE
40 kHz
rms
1000
1500
1500
1900
1900
2300
1000
1500
1900
2300
900
900
1450
1450
1850
2300
900
900
1450
1450
1800
1800
2330
850
850
1400
1400
1750
1750
2100
Note
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
Document Number: 40024
Revision: 10-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
45
135D
Vishay
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for - 55 °C to + 200 °C Operation
EXTENDED RATINGS
CAPACITANCE CASE
(µF)
CODE
47
56
150
220
390
470
560
C
C
F
F
T
T
K
39
120
330
370
C
F
T
K
33
100
120
270
330
C
F
F
T
K
18
27
82
100
220
270
C
C
F
F
T
K
22
68
82
180
220
C
F
F
T
K
10
39
68
120
C
F
T
K
6.8
27
47
68
82
C
F
T
K
K
MAX. ESR MAX. IMP.
MAX. DCL (µA)
MAX. CAPACITANCE CHANGE
at
at
at
(%) at
+ 25 °C
- 55 °C
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
120 Hz
120 Hz
+ 125 °C
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C. . . 18 WVDC at + 200 °C
135D476X0030C2
5.2
100
2
6
- 23
+ 12
+ 15
135D566X0030C2
5.2
100
2
9
- 38
+ 12
+ 15
135D157X0030F2
2.5
36
3
9
- 42
+ 13
+ 15
135D227X0030F2
2.5
36
3
16
- 60
+ 13
+ 16
135D397X0030T2
1.8
25
6
18
- 55
+ 18
+ 25
135D477X0030T2
1.8
25
8
32
- 65
+ 20
+ 25
135D567X0030K2
1.3
20
9
36
- 65
+ 25
+ 30
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C
135D396X0035C2
4.1
61
2
6
- 22
+ 12
+ 14
135D127X0035F2
2.5
31
3
10
- 40
+ 13
+ 15
135D337X0035T2
1.8
20
6
18
- 50
+ 16
+ 25
135D477X0035K2
1.3
15
9
36
- 60
+ 25
+ 30
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C
135D336X0050C2
5.0
135
2
9
- 29
+ 10
+ 12
135D107X0050F2
2.8
49
4
12
- 36
+ 13
+ 15
135D127X0050F2
2.5
49
4
24
- 42
+ 12
+ 15
135D277X0050T2
2.0
30
8
32
- 46
+ 20
+ 25
135D337X0050K2
1.5
30
9
36
- 46
+ 25
+ 30
60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C . . . 36 WVDC at + 200 °C
135C186X0060C2
7.0
160
2
12
- 20
+7
+8
135D276X0060C2
5.0
144
3
12
- 24
+ 10
+ 12
135D826X0060F2
2.9
54
4
16
- 30
+ 15
+ 15
135D107X0060F2
2.5
54
4
20
- 36
+ 12
+ 15
135D227X0060T2
1.8
29
8
32
- 40
+ 16
+ 20
135D277X0060K2
1.4
23
9
36
- 45
+ 20
+ 25
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . 45 WVDC at + 200 °C
135D226X0075C2
5.1
157
3
12
- 19
+ 10
+ 12
135D686X0075F2
3.0
63
4
16
- 25
+ 12
+ 15
135D826X0075F2
2.5
63
4
24
- 30
+ 12
+ 15
135D187X0075T2
2.2
30
9
36
- 35
+ 16
+ 20
135D227X0075K2
1.8
24
10
40
- 40
+ 20
+ 25
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C
135D106X0100C2
5.9
200
3
12
- 17
+ 10
+ 12
135D396X0100F2
3.5
80
5
24
- 20
+ 12
+ 15
135D686X0100T2
2.2
40
10
40
- 30
+ 14
+ 16
135D127X0100K2
2.7
30
12
48
- 35
+ 15
+ 17
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C
135D685X0125C2
11.7
300
3
12
- 14
+ 10
+ 12
135D276X0125F2
3.5
90
5
24
- 18
+ 12
+ 15
135D476X0125T2
2.2
50
10
40
- 26
+ 14
+ 16
135D686X0125K2
2.2
32
11
44
- 28
+ 15
+ 16
135D826X0125K2
2.8
32
12
48
- 30
+ 15
+ 17
PART NUMBER*
MAX.
RIPPLE
40 kHz
rms
800
800
1200
1200
1500
1500
2000
820
1315
1640
2040
700
1200
1200
1450
1900
700
700
1100
1100
1400
1850
600
1000
1000
1300
1800
800
1300
1600
2000
700
1200
1500
1850
1900
Note
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit
in the part number from “2” to “6”. For RoHS compliant add “E3”.
www.vishay.com
46
For technical questions, contact: [email protected]
Document Number: 40024
Revision: 10-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1