COMMUNICATIONS MODULES & SUBSYSTEMS Small Form Factor Pluggable Solder-Down Cage PL-KP1-00-000-02 Key Features • Compatible with all MSA compliant SFP transceivers and PWB layouts for single side applications • Robust one piece design • Press-fit version also available • RoHS compliant and lead-free Applications • • • • Switch and hub devices Mass storage systems interconnect Host adapter cards Enterprise switch interconnects The unique one-piece, solder-down cage represents one of JDSU’s complementary products to the Small Form Factor Pluggable (SFP) transceivers. Optimized for use with all transceiver products complying with the (SFP) multisource agreement (MSA), the solder-down cage features superior mechanical stability in standard manufacturing processes. Its hardened spring-tempered material, plus excellent material memory characteristics, further provide for consistent transceiver mate/demate performance that provides for port flexibility over the life of the system. Highlights • Industry’s most robust and sturdy cage design optimized for all SFP applications, including Fibre Channel, Gigabit Ethernet, and SONET • Supports all industry SFP transceivers, using MSA-compliant board layouts and hole sizes for single sided applications • Extensive compatibility testing with industry-wide MSA-based modules for interoperability in multiple vendor implementation • One piece design offers superior mechanical stability, simplifying implementation to customer PCBs • Tested for common applications and standard industry processes to allow seamless integration into manufacturing without additional equipment or handling requirements • Hardened spring tempered material along with excellent memory characteristics provide consistent mate and demate performance over life of equipment NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com SMALL FORM FACTOR PLUGGABLE SOLDER-DOWN CAGE 2 PL-KP1-00-000-02 Features • RoHS compliant and lead-free • Supports MSA compliant board layout and hole sizes • Interoperable with all MSA compliant transceivers • Tested for insertion force and retention • Robust manufacturing process • Sturdy construction • Hardened spring tempered alloy • Excellent memory characteristics • Utilizes common manufacturing solder processes • FCC Class B compliant • 360 degree EMI finger contacts 14.61 .575 48.67 1.916 9.68 .381 The PL-KP1-00-000-02 solder-down cage accommodates all MSA-compliant SFP transceivers, and is ideally suited for application on printed wiring board (PWB) with a minimum thickness of 0.062 inches. SMALL FORM FACTOR PLUGGABLE SOLDER-DOWN CAGE 3 Section 1 Functional Description The solder-down cage is designed in compliance with the Small Form Factor Pluggable (SFP) Transceiver Multisource Agreement (MSA) See Figure 1. PL-KP1-00000-02 may be used with the single-sided PWB layout. 1.916 48.67 .575 14.61 PLKP10000002 .381 9.68 .371 9.42 .144 3.66 .394 10.01 .093 2.36 .084 2.13 PATENT PENDING NOTE: UNLESS SPECIFIED, TOLERANCES ARE .005 Figure 1 Solder-down cage mechanical drawing (PL-KP1-00-000-02) SMALL FORM FACTOR PLUGGABLE SOLDER-DOWN CAGE 4 Section 2 Recommended OEM PCB Layouts NOTES: 34.50 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2X 30 A 2. PADS AND VIAS ARE CHASSIS GROUND 11 PLACES 20 3X 10 1 B CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEPOUT (EXCEPT CHASSIS GROUND) 3. THRU HOLES, PLATING OPTIONAL 2X 7.20 3X 7.10 0.85±0.05 2 (MARKED "S") 0.1 A B 2X 2.50 2X 2.50 11.9 1 3.68 A 14.25 TYP 5. ALL DIMENSIONS ARE IN MILLIMETERS C D 16.25 4. HOLES DENOTED WITH 'A' ARE NOT REQUIRED WITH PICOLIGHT CAGES (6 PLACES) 11.08 8.58 1.70 8.48 A 5.68 A B A 9.60 11.93 4.80 A A 1.70 2 TYP 2 2 10X 0.1 1.05±0.05 L A C 9X 0.95±0.05 3 (MARKED "G") 0.1 L A C 5 26.80 10 3 PLACES THIS AREA DENOTES COMPONENT KEEP-OUT (TRACES ALLOWED) 41.30 42.30 Figure 2 Board layout 10X 5 10X 3.20 G 2X 0.90 G S G G 10.93 10.53 9.60 G 9X 0.8 9X 0.8 G G G 20X 0.50±0.03 0.06 C D G 2X 1.55±0.05 0.1 L C D 2±0.05 TYP 0.06 L C D ALL DIMENSIONS ARE IN MILLIMETERS Figure 3 Detail layout 11.93 SMALL FORM FACTOR PLUGGABLE SOLDER-DOWN CAGE Section 3 Package and Handling Instructions The PL-KP1-00-000-02 cages are packaged in card board boxes. Each box has 10 layers of 35 cages in plastic trays. There are 350 cages per box. Flammability The PL-KP1-00-000-02 solder-down cage and EMI cage plug are made from C77000 sheet metal. Order Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: PL-KP1-00-000-02 Part Number PL-KP1-00-000-02 Description Solder-down cage NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2007 JDS Uniphase Corporation 30149204 Rev. 000 11/07 PL-KP1-00-000-02.DS.CMS.AE November 2007