MKP 1837 Vishay Roederstein Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 MAIN APPLICATIONS: Dimensions in millimeters Oscillator, timing and LC/RC filter circuits, high frequency coupling/decoupling, sample and hold circuits. W Max. L Max. Marking MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture H Max. 0.6 DIELECTRIC: Polypropylene film 6.0-1 ± 0.4 ELECTRODES: Vacuum deposited aluminum Ø 0.5 5.0 ± 0.4 COATING: Flame retardant plastic case (UL-class 94 V-0), blue, epoxy resin sealed TEMPERATURE COEFFICIENT: CONSTRUCTION: Extended metallized film (refer to general information) - 250°C x 10-6/°C (typical value) LEADS: CAPACITANCE DRIFT: Tinned wire Up to + 40°C, < 0.5% for a period of two years IEC TEST CLASSIFICATION: MAXIMUM PULSE RISE TIME: 55/100/56, according to IEC 60068 OPERATING TEMPERATURE RANGE: - 55°C to + 100°C dv/dt = 390 V/µs If the maximum pulse voltage is less than the rated voltage, higher dv/dt values can be permitted. DERATING FOR DC AND AC.CATEGORY VOLTAGE UC: 0.01µF to 0.1µF At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.7 UR CAPACITANCE TOLERANCES: SELF INDUCTANCE: CAPACITANCE RANGE: ± 10% (K), ± 5% (J), ± 2.5% (H), ± 1% (F) ~ 6 nH measured with 2mm long leads RATED VOLTAGES (UR): PULL TEST ON LEADS: 160 VDC ≥ 30 N in direction of leads according to IEC 60068-2-21 PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: DIELECTRIC ABSORPTION: 100 VAC 0.05% (typical value) acc. to IEC 60384-1 TEST VOLTAGE (ELECTRODE/ELECTRODE): RELIABILITY: 1.6 x UR for 2 s INSULATION RESISTANCE: Measured at 100 VDC after one minute 100,000 MΩ minimum value Operational life > 300,000 h Failure rate < 5 FIT (40°C and 0.5 x UR) For further details, please refer to the general information provided in this catalog. DISSIPATION FACTOR TAN δ MEASURED AT C ≤ 0.1µF 1kHz 0.4 x 10-3 10kHz 0.6 x 10-3 100kHz 4 x 10-3 Maximum values www.vishay.com 66 For technical questions, contact [email protected] Document Number 26017 Revision 01-Dec-03 MKP 1837 Metallized Polypropylene, Related Document: IEC 60384-16 Vishay Roederstein CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 16 160 VDC/100 VAC W H L 0.01 µF - 310 5.5 7.0 7.5 0.015 µF - 315 5.5 7.0 7.5 0.022 µF - 322 5.5 7.0 7.5 0.033 µF - 333 7.5 9.0 7.5 0.047 µF - 347 7.5 9.0 7.5 0.068 µF - 368 7.5 9.0 7.5 0.1 µF - 410 9.0 11.0 7.5 Further C-values upon request RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLE PCM 5 D AMMO 16.5 S* MKP 1837-322-162-D X G AMMO 18.5 S* MKP 1837-322-162-G X F REEL 16.5 350 MKP 1837-322-162-F X W REEL 18.5 350 MKP 1837-322-162-W X BULK — — MKP 1837-322-162 X — 102 0.0 1 0.0 Z [Ω] VRMS *S = box size 55 x 210 x 340mm (W x H x L) Capacitance in µF 101 22 0.0 47 1 10 100 160 VDC 10-2 103 104 105 106 107 10-3 0.01 0.05 0.1 0.5 1.0 Document Number 26017 Revision 01-Dec-03 5.0 10 50 100 f [MHz] f [Hz] Permissible AC Voltage versus Frequency 0.022µF 0.1µF 10-2 10-1 0.047µF 10-1 100 0.01µF 0.1 Impedance versus Frequency Z = f(f) (Lead length 2.0mm) For technical questions, contact [email protected] www.vishay.com 67