MKT 1813 Vishay Roederstein Metallized Polyester Film Capacitor Related Document: IEC 60384-2 MAIN APPLICATIONS: Dimensions in millimeters Blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Ød L Max. 40.0 ± 5.0 MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture 40.0 ± 5.0 D Max. d DIELECTRIC: D Polyester film 0.6 0.7 ≤ 5.0 > 5.0 ≤ 7.0 ELECTRODES: 0.8 > 7.0 < 16.5 Vacuum deposited aluminum 1.0 ≥ 16.5 COATING: Plastic-wrapped, epoxy resin sealed. Also available as flame retardant version. TIME CONSTANT: CONSTRUCTION: 55/100/56, according to IEC 60068 Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For C > 0.33µF and UR > 100 VDC 10,000 s minimum value (20,000 s typical value) For C > 0.33µF and UR ≤ 100 VDC 5000 s minimum value (15,000 s typical value) OPERATING TEMPERATURE RANGE: CAPACITANCE DRIFT: - 55°C to + 100°C Up to + 40°C, ± 1.5% for a period of two years CAPACITANCE RANGE: DERATING FOR DC AND AC. CATEGORY VOLTAGE UC: Extended metallized film (refer to general information) LEADS: Tinned wire IEC TEST CLASSIFICATION: 470pF to 22µF At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR CAPACITANCE TOLERANCES: ± 20% (M), ± 10% (K), ± 5% (J) SELF INDUCTANCE: RATED VOLTAGES (UR): 63 VDC, 100 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC ~ 12nH mesured with 6mm long leads PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: PULL TEST ON LEADS: 40 VAC, 63 VAC, 160 VAC, 200 VAC, 220 VAC, 220 VAC ≥ 20 N in direction of leads accoring to IEC 60068-2-21 TEST VOLTAGE (ELECTRODE/ELECTRODE) BEND TEST ON LEADS: 1.6 x UR for 2 s Two bends through 90°C with half of the force used in pull test INSULATION RESISTANCE: RELIABILITY: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For C ≤ 0.33µF and UR > 100 VDC 30,000 MΩ minimum value (60,000 MΩ typical value) For C ≤ 0.33µF and UR ≤ 100 VDC 15,000 MΩ minimum value (50,000 MΩ typical value) Operational life > 300,000 h Failure rate < 2 FIT (40°C and 0.5 x UR) For further details, please refer to the general information provided in this catalog. MAXIMUM PULSE RISE TIME MAXIMUM PULSE RISE TIME dv/dt [V/µs] CAPACITOR LENGTH (mm) 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC 1000 VDC 11 12 18 32 56 84 — 14 11 13 22 37 66 175 19 7 8 13 21 33 65 26.5 4 5 8 13 19 34 31.5 3 4 6 10 15 25 41.5 2 3 5 7 10 17 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Document Number 26013 Revision 01-Dec-03 For technical questions, contact [email protected] www.vishay.com 31 MKT 1813 Vishay Roederstein Metallized Polyester, Related Document.: IEC 60384-2 DISSIPATION FACTOR TAN δ C ≤ 0.1µF 0.1µF < C ≤ 1.0µF C > 1.0µF 1kHz 8 x 10-3 8 x 10-3 10 x 10-3 10kHz 15 x 10-3 15 x 10-3 — — — MEASURED AT 100kHz 25 x 10 -3 Maximum Values CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 06 63 VDC/ 40 VAC VOLTAGE CODE 01 100 VDC/ 63 VAC VOLTAGE CODE 25 250 VDC/ 160 VAC VOLTAGE CODE 40 400 VDC/ 200 VAC D D D D L L L L VOLTAGE CODE 63* 630 VDC/ 220 VAC D L VOLTAGE CODE 10* 1000 VDC/ 220 VAC D L 470 pF - 147 — — — — — — — — 5.0 11.0 — — 680 pF - 168 — — — — — — — — 5.0 11.0 — — 1000 pF - 210 — — — — — — — — 5.0 11.0 5.5 14.0 1500 pF - 215 — — — — — — — — 5.0 11.0 6.0 14.0 2200 pF - 222 — — — — — — — — 5.0 11.0 6.0 14.0 3300 pF - 233 — — — — — — — — 5.0 11.0 7.0 14.0 4700 pF - 247 — — — — — — — — 5.0 11.0 6.0 19.0 6800 pF - 268 — — — — — — 5.0 11.0 6.0 14.0 6.0 19.0 0.01 µF - 310 — — — — — — 5.0 11.0 6.0 14.0 6.5 19.0 0.015 µF - 315 — — — — 5.0 11.0 6.0 14.0 6.5 14.0 7.5 19.0 0.022 µF - 322 — — — — 5.0 11.0 6.0 14.0 7.5 14.0 9.0 19.0 0.033 µF - 333 — — — — 5.0 11.0 6.0 14.0 6.5 19.0 10.5 19.0 0.047 µF - 347 — — — — 6.0 14.0 7.0 14.0 7.5 19.0 12.0 19.0 0.068 µF - 368 — — 5.0 11.0 6.0 14.0 8.0 14.0 8.5 19.0 11.0 26.5 0.1 µF - 410 — — 5.0 11.0 6.0 14.0 7.0 19.0 10.5 19.0 13.0 26.5 — — — — — — — — 9.5 19.0** — — 19.0 10.0 26.5 13.5 31.5 0.15 µF - 415 5.0 11.0 5.5 11.0 7.0 14.0 8.5 0.22 µF - 422 5.0 11.0 6.0 14.0 7.0 19.0 8.0 26.5 11.5 26.5 16.0 31.5 — — — — — — 8.0 19.0** — — — — 14.0 6.0 19.0 8.0 19.0 9.5 26.5 13.5 26.5 16.0 41.5 0.33 µF - 433 6.0 — — — — — — 9.5 19.0** — — — — 0.47 µF - 447 7.0 14.0 6.5 19.0 9.0 19.0 11.0 26.5 14.5 31.5 19.0 41.5 — — — — — — — — 14.0 26.5** — — 6.5 19.0 7.0 19.0 8.5 26.5 11.5 31.5 14.5 41.5 — — — — — — 9.0 19.0** — — — — — — 7.5 19.0 8.5 19.0 10.0 26.5 13.5 31.5 16.5 41.5 — — 0.68 µF 1.0 µF - 468 - 510 Further C-values upon request. PCM = L + 3.5 *Not suitable for mains applications. Please refer to X-capacitors in our catalog “RFI Suppression Capacitors”. **For the smaller size please add - M at the end of the type designation (e.g. MKT 1813-510/255-M). Not CECC approved. www.vishay.com 32 For technical questions, contact [email protected] Document Number 26013 Revision 01-Dec-03 MKT 1813 Metallized Polyester, Related Document.: IEC 60384-2 CAPACITANCE CAPACITANCE CODE Vishay Roederstein VOLTAGE CODE 06 63 VDC/ 40 VAC VOLTAGE CODE 01 100 VDC/ 63 VAC VOLTAGE CODE 25 250 VDC/ 160 VAC VOLTAGE CODE 40 400 VDC/ 200 VAC VOLTAGE CODE 63* 630 VDC/ 220 VAC VOLTAGE CODE 10* 1000 VDC/ 220 VAC D L D L D L D L D L D L 1.5 µF - 515 8.5 — 19.0 — 8.0 8.0 26.5 19.0** 11.0 — 31.5 — 14.0 13.0 41.5 31.5** — — — — — — — — 2.2 µF - 522 8.5 26.5 9.5 26.5 13.0 31.5 16.5 41.5 — — — — 7.5 19.0** 9.5 19.0** — — — — — — — — 10.0 26.5 11.5 26.5 15.5 31.5 — — — — — — 8.5 19.0** — — 14.0 26.5** — — — — — — 26.5 12.0 31.5 15.5 41.5 — — — — — — 3.3 µF - 533 4.7 µF - 547 11.5 — — — — 14.5 31.5** — — — — — — 6.8 µF - 568 12.0 31.5 14.0 31.5 17.5 41.5 — — — — — — 10.0 µF - 610 14.5 31.5 16.5 31.5 21.0 41.5 — — — — — — — — 13.5 31.5** — — — — — — — — 15.0 µF - 615 18.0 31.5 20.5 31.5 — — — — — — — — 22.0 µF - 622 17.5 41.5 — — — — — — — — — — Further C-values upon request. PCM = L + 3.5 *Not suitable for mains applications. Please refer to X-capacitors in our catalog “RFI Suppression Capacitors”. **For the smaller size please add - M at the end of the type designation (e.g. MKT 1813-510/255-M). Not CECC approved. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLE AMMO — MKT 1813-422-014-G X R REEL 350 MKT 1813-422-014-R X — BULK for L > 31.5mm — MKT 1813-422-014 X G Document Number 26013 Revision 01-Dec-03 For technical questions, contact [email protected] www.vishay.com 33 MKT 1813 Metallized Polyester, Related Document.: IEC 60384-2 100 7 5 3 2 V RMS V RMS Vishay Roederstein Capacitance in µF 0.1 5 0.4 15 102 2 1.0 10 4.7 2.2 2 0.4 7 1 2.2 4.7 3 5 7 103 2 5 7 104 3 2 5 7 105 f [Hz] 3 102 V RMS Capacitance in µF 0.0 15 47 4.7 2.2 1.0 0.3 3 0.1 5 250 VDC 10 2 5 7 104 3 2 5 7 105 f [Hz] 3 Capacitance in µF 0.0 06 8 0.0 22 2. 1.0 2 0.4 7 0.0 47 0.2 2 0.1 5 7 104 2 400 VDC 10 102 2 3 5 7 103 2 5 7 104 3 2 5 7 105 f [Hz] 3 Permissible AC Voltage versus Frequency 1000 2 3 5 7 103 2 3 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency Capacitance in pF and µF 7 102 V RMS V RMS 5 7 103 3 1000 7 5 3 2 100 7 5 3 2 0.0 10 2 Permissible AC Voltage versus Frequency 1000 7 5 3 2 100 7 5 3 2 15 100 VDC 1 Permissible AC Voltage versus Frequency V RMS 0.2 10 7 5 3 2 7 63 VDC 1 5 2 3 22 Capacitance in µF 0.0 68 0.1 3 0.3 10 7 5 3 2 100 7 5 5 3 1000 Capacitance in pF and µF 7 5 3 2 0.0 0.0 1 100 04 7 0.0 0.0 02 33 7 5 2 0.0 1.0 2 01 5 0.2 10 2 3 5 7 10 3 2 3 5 7 10 Permissible AC Voltage versus Frequency www.vishay.com 34 2 22 47 0.0 22 00 0.0 1 7 47 00 2 2 4 0.0 2 0.4 3 10 2 0.2 7 630 VDC 10 00 0.1 100 0.1 3 10 2 47 0 3 5 5 7 10 f [Hz] 1000 VDC 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency For technical questions, contact [email protected] Document Number 26013 Revision 01-Dec-03