PS-1205 60 Watt Universal Power Supply 60 Watt Universal Power Supply The PS-1205 is a 60 Watt universal power supply built to function within the Opticomm CC-16B 19” 3RU rack-mountable chassis for industrial application. Each chassis is designed to accommodate up to two redundant PS-1205 units. System Design All units are swappable and come in an Insert Card form factor. The PS-1205 is convection cooled and does not require fans. This feature enables an increased MTBF value. The PS-1205’s rugged ergonomic design and wide Features temperature range are geared for industrial application. • High MTBF The PS-1205 operates at an input operational voltage of 90-264 VAC. • 60 Watt • Convection Cooling • Low Leakage Current • Wide Temperature Range • EMI/EMC and Safety Standards conform to CSA and CE Standards 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Power Supplies & Accessories Specifications Input Input Voltage Input Frequency Input Current Input Surge Protection Output Output Voltage Max Load, A @ 25C Max Load, A @ 70C Load Regulation, % Total DC Output Environmental Operating Temperature Storage Temperature Cooling Humidity Operating Altitude Shock & Vibration EMI & Safety MTBF General Dimensions & Weight Efficiency Regulatory Optiva™ Configurable Communication Platform 90-264 VAC (Operational) 50/60 Hz 2.0 A max EN61000-3-4 Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI 9 VDC ±10% 6.667 A 4.667 A ±1% 60 W Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band -20°C to +70° C -40° C to +85° C Internal Fan 95% RH non-condensing 3000 m Sinusaidal, 5 to 200 Hz at 1.5g peak Applicable CSA and CE standards >400,000 hours @ 30° C, Ground Benign, per MIL-HDBK-217F 7.70” L x 2” W x 5.05” H 80-85% Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories 20 oz. CE Compliance Opticomm reserves the right to change specifications without prior notice. MADE IN THE USA