OTS-2V4ATR1ETR Optiva Standard, ® 1 Composite Video, 4 Duplex Audio and 1 Duplex 10/100 Mbps Ethernet Composite Video, Audio and Ethernet Transmission Video The OTS-2V4ATR1ETR provides for the digital transmission of 2 Channels of Composite Video, 4 Channels of Duplex Analog Audio and 1 Channel of Duplex 10/100 Ethernet. Data Ethernet Ethernet Out/In Composite Video In Analog Audio In/Out System Design Audio Ethernet In/Out All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva Desktop Card Racks (OT-DTCR Series). Composite Video In A L E R T S T A T U S A L E R T S T A T U S Analog Audio In/Out ST, LC, SC or FC The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Composite Video Out Analog Audio Out/In A L E R T S T A T U S Composite Video Out A L E R T S T A T U S Analog Audio Out/In ST, LC, SC or FC Optiva™ Optiva™ Optiva™ Optiva™ VAD Transmission VAD Transmission VAD Transmission VAD Transmission OTS-2VT4ATR1ETR OTS-2VR4ART1ERT Features • Composite Video, Audio and Ethernet over one fiber • 12-Bit Digital Transmission (Video) • TDM - Single fiber, dual wavelength • Complies with SMPTE Standards Optiva® Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva® system daisy-chain. (See “Non-Optical Version” below). • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications The Optiva® bandwidth requirement of this system is 894 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-2VT4ATR1ETR-A2/A3M-XX-IC OTS-2VT4ATR1ETR-A2/A3-XX-IC OTS-2VT4ATR1ETR-A2/A3D-XX-IC OTS-2VT4ATR1ETR-A2/A3H-XX-IC OTS-2VT4ATR1ETR-L4/L4-XX-IC OTS-2VR4ART1ERT-A3M/A2-XX-IC OTS-2VR4ART1ERT-A3/A2-XX-IC OTS-2VR4ART1ERT-A3D/A2-XX-IC OTS-2VR4ART1ERT-A3H/A2-XX-IC OTS-2VR4ART1ERT-L4/L4-XX-IC Non-Optical Version OTS-2VT4ATR1ETR-NOC-IC OTS-2VR4ATR1ETR-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (2-slots) IC (2-slots) IC (2-slots) IC (2-slots) IC (2-slots) N/A N/A N/A IC (2-slots) Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm; "ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z. * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm forfor custom requirements. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Passband Ripple Chroma/Luma Delay Compatibility Signal to Noise Ratio Connector Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform SMPTE 170M; RS-250C (Short Haul) 12-Bit Digital Transmission 1.0 Volt p-p 5.5 MHz < 2% < 0.7° < ±0.2 dB to 5.5 MHz <12ns NTSC, PAL, SECAM > 67 dB BNC (IEC 60169-8) Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data Analog Audio Level Bandwidth Signal to Noise Ratio Total Harmonic Distortion Signal Coding Connector Data Standard Data Rate Connector General Dimensions & Weight Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Sample Configuration 6 dBm In/Out 20 Hz to 20 KHz > 80 dB < 0.1% 24-bit Micro DB25 Impedance Options: Input Balanced 600 Ohm Balanced Hi-Z Unbalanced Hi-Z Output Balanced 600 Ohm Balanced Low-Z Unbalanced Low-Z CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & Ethernet IEEE 802.3 10/100 Mbps RJ-45 UTP Insert Card (IC): 6.3” L x 0.8” W x 4.0” H Operating temperature -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC Power Supplies Supplies Power and Accessories & Accessories 11 oz < 7w per insert card Less than 1ms (Audio <10ms) LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA