HPA Module RFM-2160-35-27M Product Features Application • Solid-state linear design • Small and light weight • Suitable for UMTS • 50 Ohm Input/Output impedance • High reliability and ruggedness • Built in Output Isolator • Built in monitoring circuit • High efficiency • UMTS Repeater Description This HPA Module is a high gain, wide dynamic range amplifier module. It has superior performance comes with a modest price tag. Custom design available. Electrical Specifications @ VDD=+27DC, T=25°C, 50Ω System PARAMETER Symbol Specification Frequency Range BW 2110 ~ 2170MHz Operating Bandwidth OBW 20MHz Output Power P 35dBm @ WCDMA 4FA Gain G 35dB ±1dB (min) Gain Flatness ΔG 1.0dB (peak to peak) Gain Variation ΔGTEMP ±1dB (max) ACLR @ ACLR WCDMA 4FA 35dBm Input/Output VSWR S11/S22 ±5MHz @ 30KHz RBW -45dBc ±10MHz @ 30KHz RBW -50dBc 1.5 :1 (max) to 50Ω Isolator Included Output protection Enable : TTL Low or GND Enable (ON/OFF) Disable : TTL High or Open 4.0V±0.1V @ WCDMA 4FA 35dBm (100mV/1dB) Output Power Detector Detect range : 5dBm ~ 35dBm DC Input Voltage VDC +27V DC DC Input Current IDD Typ. 1.4A, MAX 1.7A (@Vdc= +27V, @ WCDMA 4FA 35dBm) Operating Temperature To -10 ~ +50℃ Storage Temperature Ts -40 ~ +85℃ Dimension 90 x 45 x 12.9 (mm) ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.0 HPA Module RFM-2160-35-27M OUTLINE DRAWING RF OUT Detector En/Disable +27V GND RF IN ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.0 HPA Module RFM-2160-35-27M TYPICAL PERFORMANCE Gain S11 ACLR @ WCDMA 4FA , 35dBm S22 RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.0