RFMA2124-1W 21.2 – 23.6 GHz Power Amplifier MMIC UPDATED 10/25/2006 FEATURES • • • • 21.2 – 23.6 GHz Operating Frequency Range 28.5dBm Output Power at 1dB Compression 22 dB Typical Power Gain @1dB gain Compression -41dBc Typical OIM3 @ Each Tone Pout 18dBm Excelics RFMA2124 -1W APPLICATIONS • • Point-to-point and point-to-multipoint radio Military Radar Systems Different packages are available Caution! ESD sensitive device. ELECTRICAL CHARACTERISTICS (Ta = 25 °C, 50 ohm, Vdd=7V, Vgg=-5V) SYMBOL PARAMETER/TEST CONDITIONS MIN Operating Frequency Range F P1dB G1dB OIMD3 Input RL Output RL TYP 21.2 MAX UNITS 23.6 GHz Output Power at 1dB Gain Compression 27 28.5 dBm Gain @1dB gain compression Output 3rd Order Intermodulation Distortion @∆f=10MHz, Each Tone Pout 17dBm 18 22 dB -41 -38 dBc Input Return Loss -10 dB Output Return Loss -15 -10 dB Idd Drain Current 1100 1400 mA Vdd Drain Voltage 7 8 V Vgg Gate Voltage -5 Rth Thermal Resistance (Au-Sn Eutectic Attach) Tb Operating Base Plate Temperature 7 - 30 V 7.5 + 80 o C/W ºC MAXIMUM RATINGS AT 25°C SYMBOL CHARACTERISTIC ABSOLUTE CONTINUOUS Vdd Drain Supply Voltage 12V 8V Vgg Gate Supply Voltage -8V -3 V Idd Drain Current Idss 1.9A Igg Gate Current 132mA 22 mA PIN Input Power 20dBm @ 3dB compression TCH Channel Temperature 175°C 150°C TSTG Storage Temperature -65/175°C -65/150°C 1. Operating the device beyond any of the above rating may result in permanent damage. 2. Bias conditions must also satisfy the following equation Vdd*Idd < (TCH –THS)/RTH; where THS = base plate temperature Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 page 1 of 3 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com Revised November 2006 RFMA2124-1W 21.2 – 23.6 GHz Power Amplifier MMIC UPDATED 10/25/2006 01 Package Dimension and Pin Assignment 0.330 4X.050 CHAMFER 0.165 2X DIA .090 THRU 0.200 PIN1 Indicator NC NC Excelics RFMA2124 -1W-01 Vgg 4X 0.100 0.700 RF IN 4X 0.050 Vdd 10X 0.013 RF OUT Vgg Vdd NC NC 0.530 10X 0.100±0.010 0.060 10X 0.004 0.040 0.025 ALL DIMENSIONS IN INCHES TOLERANCE: ±0.005 Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 page 2 of 3 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com Revised November 2006 RFMA2124-1W 21.2 – 23.6 GHz Power Amplifier MMIC UPDATED 10/25/2006 03 Package Dimension and Pin Assignment 0.330 4X.050 CHAMFER 0.165 2X DIA .090 THRU 0.225 PIN1 Indicator N/C Vd Excelics RFMA2124 -1W-03 4X 0.125 RF IN 0.700 6X 0.013 RF OUT 0.530 Vd Vg 6X 0.100±0.010 0.060 10X 0.004 0.040 0.025 ALL DIMENSIONS IN INCHES TOLERANCE: ±0.005 Ordering Information Part Number RFMA2124-1W-01 Refer 01 Package Outline RFMA2124-1W-03 Refer 03 Package Outline DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 page 3 of 3 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com Revised November 2006